LABS Notary Control Scripts

-------=== TO UPDATE FROM StakedNotary ===-------

You may need to remove ~/komodo if you are low on disk space, use df -h to check.

cd ~ 
mv StakedNotary StakedNotary.old 
git clone https://github.com/KMDLabs/LabsNotary.git 
cp ~/StakedNotary.old/config.ini ~/LabsNotary/
cd LabsNotary/install
./buildkomodo.sh
cd .. 
./start.sh

-------=== TO UPDATE FROM StakedNotary ===-------

Setting up your VPS

You need a new user, you cannot use root

For ubuntu 16.04 login as root and create a user: adduser

Add your user to sudo: gpasswd -a <user> sudo

Its reccomended to install an SSH key to this user. https://www.digitalocean.com/community/tutorials/how-to-set-up-ssh-keys--2

Logout of root and login to your user to continue installing the notary repo.

Install instructions

cd ~
git clone https://github.com/KMDLabs/LabsNotary.git
cd LabsNotary

Install the relavent repos and dependancies

You need to build our special repo of komodo thanks to @libbscott and nanomsg and SuperNET for iguana. Both these scripts cover all required deps on debian based distros.

cd install
./installSuperNET.sh
./buildkomodo.sh
./installnanomsg.sh

If you want/need the python stuff install these:

sudo apt-get install python3-dev python3 libgnutls28-dev libssl-dev python3-pip libcurl4-gnutls-dev
pip3 install setuptools 
pip3 install wheel 
pip3 install base58 slick-bitcoinrpc requests python-bitcoinlib configparser

Now you need to copy the config file and edit it with our pubkey/Raddress and WIF key for KMD.

cd ~/LabsNotary
cp config_example.ini config.ini
nano config.ini

e.g btcpubkey = 02.....

We also need to unblock the iguana port. To find this look in assetchains.json for iguana_port (default is below):

sudo ufw allow 8222
sudo ufw allow 22
sudo ufw enable

After this we are ready to launch KMD and any chains that happen to be in assetchains.json and import our private keys to them all.

./start.sh

To keep an eye on komodods sync status run: tail -f ~/.komodo/debug.log This could take a while. 5 to 10 hours.The sync progress is also printed to the terminal you started start.sh at.

Once iguana has started we need to run the utxo splitter (based on @lukechilds work)

./utxosplitter.sh

You need put this UTXO splitter on a cron job.

crontab -e

Enter this into the cron tab, to run the splitter at 33min past each hour:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin
33 * * * * /home/<your_username>/LabsNotary/utxosplitter.sh >> /home/<your_username>/utxo_split.log 2>&1

Using features of LabsNotary komodod.

Wallet filter

Add as many address as you like to the filter, by default it is off and lets all tx though, by whitelisting an address it allows it to send you funds when the filter is active. The address in the filter are saved to a text file in the coin datadir and reloaded on daemon start.

Specify address for whilelisting with either the command line param or conf file setting:

-whitelistaddress=RTVti13NP4eeeZaCCmQxc2bnPdHxCJFP9x

RPCS:

`addwhitelistaddress` address
`removewhitelistaddress` address
`setwalletfilter` true/false 
`getwalletfilterstatus` 

Wallet transaction cleaner

cleanwallettransactions

Provide a txid to delete all tx in the wallet except the tx specified. The walletreset.sh script does this all for you.
Running without a txid specified will clean all transaction history in the wallet older than the last unspent utxo. 

dpowlistunspent RPC

Special RPC for iguana, it caches and returns unspent utxos very quickly. Needing a lean wallet.dat is now thing of the past. Should also allow for staking and mining on notary nodes without slowing down notarizations.

Adding New Coins

Add the chain params to assetchains.json (make sure you have the freq param it is required!)

./start.sh

Make sure some funds have been sent and everything should just work. :D

Using some of the Scripts

To get a list of coins: ./listcoins.sh

To issue commands to a coin: asset-cli <COINS_NAME> <COMMAND>

To issue commands to all assetchains: assets-cli <COMMAND>

To kill everything: ./stop.sh

To HARD reset a coins wallet: ./walletreset.sh <coin>

Hard reset will send the entire balance to yourself, then remove all transactions that are not this transaction from the wallet after it has been confirmed.

To SOFT reset a KMDs wallet (works with ac by specifying -ac_name=): komodo-cli cleanwallettransactions

For stats you have multiple options:

`stats.sh` based off webworker01's script, only counts from the wallet.dat, 777 tx deep only.
`py_scripts/stats.py` this uses getNotarisationsFromBlock RPC, thansk to smk762 and Alright. 
`py_scripts/notarypay_stats.py` this tallys notarypay coinbase payments, works on ac_notarypay chains only, thanks to Alright. 

To list internal iguana information such as revcmask and bestmask use (maskhex is disabled, not really useful now all dpowed chains can be returned, and can crash iguana): checkmasks <chain> or <maskhex>

The install scripts come with the tools: htop: To monitor system load slurm and nload: To monitor network load tmux: To make panes, so you can run these tools and iguana console logs at he same time and detach/reattach when you login/out of the notary node, some useful links to get you started:

    https://github.com/gpakosz/.tmux    
    https://leanpub.com/the-tao-of-tmux/read
    https://hackernoon.com/a-gentle-introduction-to-tmux-8d784c404340
    
`screen`: used for daemons, and iguana if we run more than one, to attach a coin:
    `screen -r <coin>` 
    To attach an iguana (noty currently used, because we only run the 1 iguana):
    `screen -r <branch>`