Touch Firmware file for for Linux Device
| Item | Description |
|---|---|
| Manufacturer | RuggedPC |
| Device | RuggedHandC62V or Kcosit K72H |
| Website | hhttps://www.kcosit.com/Rugged-Handheld-PDA-Win10-1D2D-Barcode-Scanner-4GB-RAM-64GB-ROM-p1563970.html |
| Vendor driver (Windows) | SileadTouch.sys |
| Extracted firmware | firmware_00.fw |
| Firmware for gslx680-acpi | SileadTouch.sys |
| Display resolution | 1280X720 |
| Touch panel resolution | unknown |
| Touch controller | GSLxxxx, you should open your device and verify this |
| Multitouch support | Yes (10 of recognized touch points) |
| Finger tracking | No |
| Mirrored horizontally | No |
| Mirrored vertically | No |
| Axes swapped | Yes |
create a Folder
sudo mkdir /lib/firmware/silead
copy and rename Firmware file
sudo cp firmware_00.fw /lib/firmware/silead/mssl1680.fw
make sure insalled these
sudo apt-get install xserver-xorg-input-evdev xserver-xorg-core
edit this part of 10-evdev.conf file
sudo nano /usr/share/X11/xorg.conf.d/10-evdev.conf
Section "InputClass" Identifier "evdev touchscreen catchall" MatchIsTouchscreen "on" MatchDevicePath "/dev/input/event*" Driver "evdev" Option "SwapXY" "0" EndSection
edit 99-calibration.conf
sudo nano /usr/share/X11/xorg.conf.d/99-calibration.conf
Section "InputClass" Identifier "evdev touchscreen catchall" MatchIsTouchscreen "on" MatchDevicePath "/dev/input/event*" Driver "evdev" Option "InvertX" "1" Option "InvertY" "1" Option "Calibration" "15 875 15 1650" Option "SwapAxes" "1" EndSection
reboot
this currently only works under X11 no Wayland support