Reli

Reli is a sampling profiler (or a VM state inspector) written in PHP. It can read information about running PHP script from outside of the process. It's a stand alone CLI tool, so target programs don't need any modifications. The former name of this tool was sj-i/php-profiler.

What can I use this for?

Detecting and visualizing bottlenecks in PHP scripts
- It provides not only at the function level of profiling but also at line level or opcode level resolution
Profiling without accumulated overhead even when a lot of fast functions called as this is a sampling profiler (see the links below, tideways, xhprof, and the profiler of xdebug, many profilers have this overhead)
- Profiling Overhead and PHP 7
- nikic/sample_prof
Investigating the cause of a bug or performance failure
- Even if a PHP script is in an unexplained unresponsive state, you can use this to find out what it is doing internally.
Finding memory bottlenecks or memory leaks

How it works

It's implemented by using following techniques:

Parsing ELF binary of the interpreter
Reading memory map from /proc/<pid>/maps
Reading memory of outer process by using ptrace(2) and process_vm_readv(2) via FFI
Analyzing internal data structure in the PHP VM (aka Zend Engine)

If you have a bit of extra CPU resource, the overhead of this software would be negligible.

Differences to phpspy, when to use reli

Reli is heavily inspired by adsr/phpspy.

The main difference between the two is that reli is written in almost pure PHP while phpspy is written in C. In profiling, there are cases you want to customize how and what information to get. If customizability for PHP developers matters, you can use this software at the cost of performance. (Although, we hope the cost is not too big.)

Additionally, reli can find VM state from ZTS interpreters. For example, in the daemon mode, traces of threads started via ext-parallel are automatically retrieved. Currently this cannot be done with phpspy only. Reli also provides functionality to only get the address of EG from targets, so you can use actual profiling with phpspy if you want, even when the target is ZTS.

Other features of reli that phpspy does not currently have include:

Output more accurate line numbers
Customize output format with PHP templates
Get running opcodes of the PHP-VM
Automatic retrieval of the target PHP version from stripped PHP binaries
Output traces in speedscope format
Deeply analyzing memory usage of the target process

There is no particular reason why these features cannot be implemented on the phpspy side, so it may be possible to do them on phpspy in the future.

On the other hand, there are a few things that phpspy can do but reli cannot yet.

Redirecting output of child processes
Forcing the address of EG
Data retrieval from sapi_globals
Reading variables
Run more faster with lower overhead.
etc.

Much of what can be done with phpspy will be done with reli in the future.

Requirements

Supported PHP versions

Execution

PHP 8.1+ (NTS / ZTS)
64bit Linux x86_64
FFI extension must be enabled.
PCNTL extension must be enabled.

Target

PHP 7.0+ (NTS / ZTS)
64bit Linux x86_64

On targeting ZTS, the target process must load libpthread.so, and also you must have unstripped binary of the interpreter and the libpthread.so, to find EG from the TLS.

Installation

From Composer

composer create-project reliforp/reli-prof
cd reli-prof
./reli

From Git

git clone [email protected]:reliforp/reli-prof.git
cd reli-prof
composer install
./reli

Usage

Get call traces

./reli inspector:trace --help
Description:
  periodically get call trace from an outer process or thread

Usage:
  inspector:trace [options] [--] [<cmd> [<args>...]]

Arguments:
  cmd                                        command to execute as a target: either pid (via -p/--pid) or cmd must be specified
  args                                       command line arguments for cmd

Options:
  -p, --pid=PID                              process id
  -d, --depth[=DEPTH]                        max depth
  -s, --sleep-ns[=SLEEP-NS]                  nanoseconds between traces (default: 1000 * 1000 * 10)
  -r, --max-retries[=MAX-RETRIES]            max retries on contiguous errors of read (default: 10)
  -S, --stop-process[=STOP-PROCESS]          stop the target process while reading its trace (default: off)
      --php-regex[=PHP-REGEX]                regex to find the php binary loaded in the target process
      --libpthread-regex[=LIBPTHREAD-REGEX]  regex to find the libpthread.so loaded in the target process
      --php-version[=PHP-VERSION]            php version (auto|v7[0-4]|v8[01]) of the target (default: auto)
      --php-path[=PHP-PATH]                  path to the php binary (only needed in tracing chrooted ZTS target)
      --libpthread-path[=LIBPTHREAD-PATH]    path to the libpthread.so (only needed in tracing chrooted ZTS target)
  -t, --template[=TEMPLATE]                  template name (phpspy|phpspy_with_opcode|json_lines) (default: phpspy)
  -o, --output=OUTPUT                        path to write output from this tool (default: stdout)
  -h, --help                                 Display help for the given command. When no command is given display help for the list command
  -q, --quiet                                Do not output any message
  -V, --version                              Display this application version
      --ansi|--no-ansi                       Force (or disable --no-ansi) ANSI output
  -n, --no-interaction                       Do not ask any interactive question
  -v|vv|vvv, --verbose                       Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Daemon mode

./reli inspector:daemon --help
Description:
  concurrently get call traces from processes whose command-lines match a given regex

Usage:
  inspector:daemon [options]

Options:
  -P, --target-regex=TARGET-REGEX            regex to find target processes which have matching command-line (required)
  -T, --threads[=THREADS]                    number of workers (default: 8)
  -d, --depth[=DEPTH]                        max depth
  -s, --sleep-ns[=SLEEP-NS]                  nanoseconds between traces (default: 1000 * 1000 * 10)
  -r, --max-retries[=MAX-RETRIES]            max retries on contiguous errors of read (default: 10)
  -S, --stop-process[=STOP-PROCESS]          stop the target process while reading its trace (default: off)
      --php-regex[=PHP-REGEX]                regex to find the php binary loaded in the target process
      --libpthread-regex[=LIBPTHREAD-REGEX]  regex to find the libpthread.so loaded in the target process
      --php-version[=PHP-VERSION]            php version (auto|v7[0-4]|v8[01]) of the target (default: auto)
      --php-path[=PHP-PATH]                  path to the php binary (only needed in tracing chrooted ZTS target)
      --libpthread-path[=LIBPTHREAD-PATH]    path to the libpthread.so (only needed in tracing chrooted ZTS target)
  -t, --template[=TEMPLATE]                  template name (phpspy|phpspy_with_opcode|json_lines) (default: phpspy)
  -o, --output=OUTPUT                        path to write output from this tool (default: stdout)
  -h, --help                                 Display help for the given command. When no command is given display help for the list command
  -q, --quiet                                Do not output any message
  -V, --version                              Display this application version
      --ansi|--no-ansi                       Force (or disable --no-ansi) ANSI output
  -n, --no-interaction                       Do not ask any interactive question
  -v|vv|vvv, --verbose                       Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

top-like mode

./reli inspector:top --help
Description:
  show an aggregated view of traces in real time in a form similar to the UNIX top command.

Usage:
  inspector:top [options]

Options:
  -P, --target-regex=TARGET-REGEX            regex to find target processes which have matching command-line (required)
  -T, --threads[=THREADS]                    number of workers (default: 8)
  -d, --depth[=DEPTH]                        max depth
  -s, --sleep-ns[=SLEEP-NS]                  nanoseconds between traces (default: 1000 * 1000 * 10)
  -r, --max-retries[=MAX-RETRIES]            max retries on contiguous errors of read (default: 10)
  -S, --stop-process[=STOP-PROCESS]          stop the target process while reading its trace (default: off)
      --php-regex[=PHP-REGEX]                regex to find the php binary loaded in the target process
      --libpthread-regex[=LIBPTHREAD-REGEX]  regex to find the libpthread.so loaded in the target process
      --php-version[=PHP-VERSION]            php version (auto|v7[0-4]|v8[01]) of the target (default: auto)
      --php-path[=PHP-PATH]                  path to the php binary (only needed in tracing chrooted ZTS target)
      --libpthread-path[=LIBPTHREAD-PATH]    path to the libpthread.so (only needed in tracing chrooted ZTS target)
  -h, --help                                 Display help for the given command. When no command is given display help for the list command
  -q, --quiet                                Do not output any message
  -V, --version                              Display this application version
      --ansi|--no-ansi                       Force (or disable --no-ansi) ANSI output
  -n, --no-interaction                       Do not ask any interactive question
  -v|vv|vvv, --verbose                       Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Get the address of EG

./reli inspector:eg --help
Description:
  get EG address from an outer process or thread

Usage:
  inspector:eg_address [options] [--] [<cmd> [<args>...]]

Arguments:
  cmd                                        command to execute as a target: either pid (via -p/--pid) or cmd must be specified
  args                                       command line arguments for cmd

Options:
  -p, --pid=PID                              process id
      --php-regex[=PHP-REGEX]                regex to find the php binary loaded in the target process
      --libpthread-regex[=LIBPTHREAD-REGEX]  regex to find the libpthread.so loaded in the target process
      --php-version[=PHP-VERSION]            php version (auto|v7[0-4]|v8[01]) of the target (default: auto)
      --php-path[=PHP-PATH]                  path to the php binary (only needed in tracing chrooted ZTS target)
      --libpthread-path[=LIBPTHREAD-PATH]    path to the libpthread.so (only needed in tracing chrooted ZTS target)
  -h, --help                                 Display help for the given command. When no command is given display help for the list command
  -q, --quiet                                Do not output any message
  -V, --version                              Display this application version
      --ansi|--no-ansi                       Force (or disable --no-ansi) ANSI output
  -n, --no-interaction                       Do not ask any interactive question
  -v|vv|vvv, --verbose                       Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

[Experimental] Dump the memory usage of the target process

./reli inspector:memory --help
Description:
  [experimental] get memory usage from an outer process

Usage:
  inspector:memory [options] [--] [<cmd> [<args>...]]

Arguments:
  cmd                                        command to execute as a target: either pid (via -p/--pid) or cmd must be specified
  args                                       command line arguments for cmd

Options:
      --stop-process[=STOP-PROCESS]          stop the process while inspecting [default: true]
  -p, --pid=PID                              process id
      --php-regex[=PHP-REGEX]                regex to find the php binary loaded in the target process
      --libpthread-regex[=LIBPTHREAD-REGEX]  regex to find the libpthread.so loaded in the target process
      --php-version[=PHP-VERSION]            php version (auto|v7[0-4]|v8[01]) of the target (default: auto)
      --php-path[=PHP-PATH]                  path to the php binary (only needed in tracing chrooted ZTS target)
      --libpthread-path[=LIBPTHREAD-PATH]    path to the libpthread.so (only needed in tracing chrooted ZTS target)
  -h, --help                                 Display help for the given command. When no command is given display help for the list command
  -q, --quiet                                Do not output any message
  -V, --version                              Display this application version
      --ansi|--no-ansi                       Force (or disable --no-ansi) ANSI output
  -n, --no-interaction                       Do not ask any interactive question
  -v|vv|vvv, --verbose                       Increase the verbosity of messages: 1 for normal output, 2 for more verbose output and 3 for debug

Examples

Trace a script

$ ./reli i:trace -- php -r "fgets(STDIN);"
0 fgets <internal>:-1
1 <main> <internal>:-1

0 fgets <internal>:-1
1 <main> <internal>:-1

0 fgets <internal>:-1
1 <main> <internal>:-1

<press q to exit>
...

Attach to a running process

$ sudo php ./reli i:trace -p 2182685
0 time_nanosleep <internal>:-1
1 Reli\Lib\Loop\LoopMiddleware\NanoSleepMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/NanoSleepMiddleware.php:33
2 Reli\Lib\Loop\LoopMiddleware\KeyboardCancelMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/KeyboardCancelMiddleware.php:39
3 Reli\Lib\Loop\LoopMiddleware\RetryOnExceptionMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/RetryOnExceptionMiddleware.php:37
4 Reli\Lib\Loop\Loop::invoke /home/sji/work/reli/src/Lib/Loop/Loop.php:26
5 Reli\Command\Inspector\GetTraceCommand::execute /home/sji/work/reli/src/Command/Inspector/GetTraceCommand.php:133
6 Symfony\Component\Console\Command\Command::run /home/sji/work/reli/vendor/symfony/console/Command/Command.php:291
7 Symfony\Component\Console\Application::doRunCommand /home/sji/work/reli/vendor/symfony/console/Application.php:979
8 Symfony\Component\Console\Application::doRun /home/sji/work/reli/vendor/symfony/console/Application.php:299
9 Symfony\Component\Console\Application::run /home/sji/work/reli/vendor/symfony/console/Application.php:171
10 <main> /home/sji/work/reli/reli:45

0 time_nanosleep <internal>:-1
1 Reli\Lib\Loop\LoopMiddleware\NanoSleepMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/NanoSleepMiddleware.php:33
2 Reli\Lib\Loop\LoopMiddleware\KeyboardCancelMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/KeyboardCancelMiddleware.php:39
3 Reli\Lib\Loop\LoopMiddleware\RetryOnExceptionMiddleware::invoke /home/sji/work/reli/src/Lib/Loop/LoopMiddleware/RetryOnExceptionMiddleware.php:37
4 Reli\Lib\Loop\Loop::invoke /home/sji/work/reli/src/Lib/Loop/Loop.php:26
5 Reli\Command\Inspector\GetTraceCommand::execute /home/sji/work/reli/src/Command/Inspector/GetTraceCommand.php:133
6 Symfony\Component\Console\Command\Command::run /home/sji/work/reli/vendor/symfony/console/Command/Command.php:291
7 Symfony\Component\Console\Application::doRunCommand /home/sji/work/reli/vendor/symfony/console/Application.php:979
8 Symfony\Component\Console\Application::doRun /home/sji/work/reli/vendor/symfony/console/Application.php:299
9 Symfony\Component\Console\Application::run /home/sji/work/reli/vendor/symfony/console/Application.php:171
10 <main> /home/sji/work/reli/reli:45

<press q to exit>
...

The executing process must have the CAP_SYS_PTRACE capability. (Usually run as root is enough.)

Daemon mode

$ sudo php ./reli i:daemon -P "^/usr/sbin/httpd"

The executing process must have the CAP_SYS_PTRACE capability. (Usually run as root is enough.)

Get the address of EG

$ sudo php ./reli i:eg -p 2183131
0x555ae7825d80

The executing process must have the CAP_SYS_PTRACE capability. (Usually run as root is enough.)

Show currently executing opcodes at traces

If a user wants to profile a really CPU-bound application, then he or she wouldn't only want to know what line is slow, but what opcode is. In such cases, use --template=phpspy_with_opcode with inspector:trace or inspector:daemon.

$ sudo php ./reli i:trace --template=phpspy_with_opcode -p <pid of the target process or thread>

The output would be like the following.

0 <VM>::ZEND_ASSIGN <VM>:-1
1 Mandelbrot::iterate /home/sji/work/test/mandelbrot.php:33:ZEND_ASSIGN
2 Mandelbrot::__construct /home/sji/work/test/mandelbrot.php:12:ZEND_DO_FCALL
3 <main> /home/sji/work/test/mandelbrot.php:45:ZEND_DO_FCALL

0 <VM>::ZEND_ASSIGN <VM>:-1
1 Mandelbrot::iterate /home/sji/work/test/mandelbrot.php:30:ZEND_ASSIGN
2 Mandelbrot::__construct /home/sji/work/test/mandelbrot.php:12:ZEND_DO_FCALL
3 <main> /home/sji/work/test/mandelbrot.php:45:ZEND_DO_FCALL

The currently executing opcode becomes the first frame of the callstack. So visualizations of the trace like flamegraph can show the usage of opcodes.

For informational purposes, executing opcodes are also added to each end of the call frames. Except for the first frame, opcodes for function calls such as ZEND_DO_FCALL should appear there.

If JIT is enabled at the target process, this information may be slightly inaccurate.

Use in a docker container and target a process on host

$ docker pull reliforp/reli-prof
$ docker run -it --security-opt="apparmor=unconfined" --cap-add=SYS_PTRACE --pid=host reliforp/reli-prof i:trace -p <pid of the target process or thread>

Generate flamegraphs from traces

$ ./reli i:trace -o traces -- php ./vendor/bin/psalm.phar --no-cache
$ ./reli c:flamegraph <traces >flame.svg
$ google-chrome flame.svg

The generated flamegraph below visualizes traces from the execution of the psalm command.

Generate the speedscope format from phpspy compatible traces

$ sudo php ./reli i:trace -p <pid of the target process or thread> >traces
$ ./reli c:speedscope <traces >profile.speedscope.json
$ speedscope profile.speedscope.json

See #101.

Generate the callgrind format output from phpspy compatible traces and visualize it with kcachegrind

$ ./reli c:callgrind <traces >callgrind.out
$ kcachegrind callgrind.out

Dump the memory usage of the target proces

Caution

Don't upload the output of this command to the internet, because it can contain sensitive information of the target script!!!

Warning

This feature is in an experimental stage and may be less stable than others. The contents of the output may change in the near future.

$ sudo php ./reli i:memory -p 2183131 >2183131.memory_dump.json
$ cat 2183131.memory_dump.json | jq .summary

Only NTS targets are supported for now.

The output would be like the following.

[
  {
    "zend_mm_heap_total": 10485760,
    "zend_mm_heap_usage": 7642504,
    "zend_mm_chunk_total": 10485760,
    "zend_mm_chunk_usage": 7642504,
    "zend_mm_huge_total": 0,
    "zend_mm_huge_usage": 0,
    "vm_stack_total": 262144,
    "vm_stack_usage": 8224,
    "compiler_arena_total": 917504,
    "compiler_arena_usage": 815480,
    "possible_allocation_overhead_total": 549645,
    "possible_array_overhead_total": 378768,
    "memory_get_usage": 8263440,
    "memory_get_real_usage": 12582912,
    "cached_chunks_size": 2097152,
    "heap_memory_analyzed_percentage": 92.48574443573136,
    "php_version": "v82"
  }
]

And you can get the call trace from the dump.

$ cat 2183131.memory_dump.json | jq '.context.call_frames[]|objects|.function_name'
"time_nanosleep"
"Reli\\Lib\\Loop\\LoopMiddleware\\NanoSleepMiddleware::invoke"
"Reli\\Lib\\Loop\\LoopMiddleware\\KeyboardCancelMiddleware::invoke"
"Reli\\Lib\\Loop\\LoopMiddleware\\RetryOnExceptionMiddleware::invoke"
"Reli\\Lib\\Loop\\Loop::invoke"
"Reli\\Command\\Inspector\\GetTraceCommand::execute"
"Symfony\\Component\\Console\\Command\\Command::run"
"Symfony\\Component\\Console\\Application::doRunCommand"
"Symfony\\Component\\Console\\Application::doRun"
"Symfony\\Component\\Console\\Application::run"
""

You can also see the contents of the local variables of a specific call frame.

$ cat 2183131.memory_dump.json | jq '.context.call_frames[]|objects|select(.function_name=="time_nanosleep")'
{
  "#node_id": 1,
  "#type": "CallFrameContext",
  "function_name": "time_nanosleep",
  "local_variables": {
    "#node_id": 2,
    "#type": "CallFrameVariableTableContext",
    "$args_to_internal_function[0]": {
      "#node_id": 3,
      "#type": "ScalarValueContext",
      "value": 0
    },
    "$args_to_internal_function[1]": {
      "#node_id": 4,
      "#type": "ScalarValueContext",
      "value": 9743095
    }
  }
}

If a context is referencing another location in the dump file, it can also be extracted with jq.

$ cat 2183131.memory_dump.json | jq '.context.call_frames["7"].local_variables'
{
  "#node_id": 1433,
  "#type": "CallFrameVariableTableContext",
  "command": {
    "#reference_node_id": 368
  },
  "input": {
    "#reference_node_id": 1395
  },
  "output": {
    "#reference_node_id": 54
  },
  "helper": {
    "#reference_node_id": 591
  },
  "commandSignals": {
    "#reference_node_id": 69
  }
}

$ cat 2183131.memory_dump.json | jq '..|objects|select(."#node_id"==368)|.' | head -n 20
{
  "#node_id": 368,
  "#type": "ObjectContext",
  "#locations": [
    {
      "address": 139988652434432,
      "size": 472,
      "refcount": 6,
      "type_info": 3221409800,
      "class_name": "Reli\\Command\\Inspector\\GetTraceCommand"
    }
  ],
  "object_handlers": {
    "#reference_node_id": 7
  },
  "object_properties": {
    "#node_id": 369,
    "#type": "ObjectPropertiesContext",
    "php_globals_finder": {
      "#node_id": 370,
      "#type": "ObjectContext",
      "#locations": [
        {

You can also extract all references to a specific object.

$ cat 2183131.memory_dump.json | jq 'path(..|objects|select(."#reference_node_id"==368 or ."#node_id"==368))|join(".")'
"context.call_frames.1.this.chain.callable.closure.this_ptr"
"context.call_frames.1.this.chain.callable.closure.this_ptr.application.commands.array_elements.inspector:trace.value"
"context.call_frames.1.this.chain.callable.closure.this_ptr.application.runningCommand"
"context.call_frames.5.this"
"context.call_frames.6.this"
"context.call_frames.7.local_variables.command"
"context.call_frames.8.local_variables.command"
"context.objects_store.285"

The refcount of the object recorded in the memory location is 6 in this example. Calling methods via $obj->call() adds refcount by 1, but $this->call() doesn't add refcount. References from objects_store don't add refcount too. So all 6 references are analyzed here.

See ./docs/memory-profiler.md for more info.

Troubleshooting

I get an error message "php module not found" and can't get a trace!

If your PHP binary uses a non-standard binary name that does not end with /php, use the --php-regex option to specify the name of the executable (or shared object) that contains the PHP interpreter.

I don't think the trace is accurate.

The -S option will give you better results. Using this option stops the execution of the target process for a moment at every sampling, but the trace obtained will be more accurate. If you don't stop the VMs from running when profiling CPU-heavy programs such as benchmarking programs, you may misjudge the bottleneck, because you will miss more VM states that transition very quickly and are not detected well.

Trace retrieval from ZTS target does not work on Ubuntu 21.10 or later.

Try to specify --libpthread-regex="libc.so" as an option.

I can't get traces on Amazon Linux 2.

First, try cat /proc/<pid>/maps to check the memory map of the target PHP process. If the first module does not indicate the location of the PHP binary and looks like an anonymous region, try to specify --php-regex="^$" as an option.

Goals

We would like to achieve the following 5 goals through this project.

To be able to closely observe what is happening inside a running PHP script.
To be a framework for PHP programmers to create a freely customizable PHP profiler.
To be experimentation for the use of PHP outside of the web, where recent improvements of PHP like JIT and FFI have opened the door.
Another entry point for PHP programmers to learn about PHP's internal implementation.
To create a program that is fun to write for me.

LICENSE

MIT (mostly)
tools/flamegraph/flamegraph.pl is copied from https://github.com/brendangregg/FlameGraph and licenced under the CDDL 1.0. See tools/flamegraph/docs/cddl1.txt and the header of the script.
Some C headers defining internal structures are extracted from php-src. They are licensed under the zend engine license. See src/Lib/PhpInternals/Headers . So here are the words required by the zend engine license.

This product includes the Zend Engine, freely available at
     http://www.zend.com

What does the name "Reli" mean?

"Reli" means nothing, though you are free to think of this tool as a something reliable, or religious, or relishable, or whatever other reli-s as you like.

Originally the name of this tool was just "php-profiler". Due to a licensing problem (#175), this simple good name had to be changed.

So we applied a randomly chosen string manipulation function to the original name. strrev('php-profiler') results to 'reliforp-php', and it can be read as "reli for p(php)". Thus the name of this tool is "Reli for PH*" now. And you can also call it just "Reli".

Name		Name	Last commit message	Last commit date
Latest commit History 1,027 Commits
.github/workflows		.github/workflows
config		config
docs		docs
resources/templates		resources/templates
src		src
tests		tests
tools		tools
.dockerignore		.dockerignore
.gitignore		.gitignore
Dockerfile		Dockerfile
LICENSE		LICENSE
README.md		README.md
composer.json		composer.json
composer.lock		composer.lock
phpcs.xml		phpcs.xml
phpunit.xml.dist		phpunit.xml.dist
psalm.xml		psalm.xml
reli		reli
renovate.json		renovate.json

License

GreenCape/reli-prof

Folders and files

Latest commit

History

Repository files navigation

Reli

What can I use this for?

How it works

Differences to phpspy, when to use reli

Requirements

Supported PHP versions

Execution

Target

Installation

From Composer

From Git

Usage

Get call traces

Daemon mode

top-like mode

Get the address of EG

[Experimental] Dump the memory usage of the target process

Examples

Trace a script

Attach to a running process

Daemon mode

Get the address of EG

Show currently executing opcodes at traces

Use in a docker container and target a process on host

Generate flamegraphs from traces

Generate the speedscope format from phpspy compatible traces

Generate the callgrind format output from phpspy compatible traces and visualize it with kcachegrind

Dump the memory usage of the target proces

Troubleshooting

I get an error message "php module not found" and can't get a trace!

I don't think the trace is accurate.

Trace retrieval from ZTS target does not work on Ubuntu 21.10 or later.

I can't get traces on Amazon Linux 2.

Goals

LICENSE

What does the name "Reli" mean?

See also

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages