adguard2influxdb

Adguard to InfluxDB is a tiny daemon written in python to fetch data from the Adguard DNS and writes it to influxdb. It is equal capable as adguardhome and directly writing to influxdb.

Grafana

Use grafana_dashboard_adguard.json to import this dashboard.

Requirements

• python3.6 or newer
• influxdb
• adguardhome >= 0.4.2

Setup

• here we assume we install in /opt

Ubuntu 18.04

sudo apt-get install virtualenv python3-lxml
cd /opt
git clone https://github.com/Friedjof/adguard2influxdb.git
cd adguard2influxdb
virtualenv --system-site-packages -p python3 .venv
. .venv/bin/activate
pip3 install -r requirements.txt

RHEL/CentOS 7 with EPEL

yum install git python36-virtualenv python36-lxml
cd /opt
git clone https://github.com/Friedjof/adguard2influxdb.git
cd adguard2influxdb
virtualenv-3 --system-site-packages .venv
. .venv/bin/activate
pip3 install -r requirements.txt

• modify your configuration and test it

chmod 755 ./adguard2influxdb.py
./adguard2influxdb.py

Install as systemd service

Ubuntu

cp /opt/adguard2influxdb/adguard2influxdb.service /etc/systemd/system

RHEL/CentOS

sed -e 's/nogroup/nobody/g' /opt/adguard2influxdb/adguard2influxdb.service > /etc/systemd/system/adguard2influxdb.service

systemctl daemon-reload
systemctl start adguard2influxdb
systemctl enable adguard2influxdb

Run with Docker

git clone https://github.com/Friedjof/adguard2influxdb.git
cd adguard2influxdb

Copy the config from the example to my-adguard2influxdb.ini and edit the settings.

Now you should be able to build and run the image with following commands

docker build -t adguard2influxdb .
docker run -d -v $PWD/configuration.ini:/app/configuration.ini --name adguard2influxdb adguard2influxdb

You can alternatively use the provided docker-compose.yml:

docker-compose up -d

If you're running the influxdb in a docker on the same host you need to add --link to the run command.

Example:

• starting the influx container

docker run --name=influxdb -d -p 8086:8086 influxdb

• set influxdb host in adguard2influxdb.ini to influxdb
• run docker container

docker run --link influxdb -d -v $PWD/configuration.ini:/app/configuration.ini --name adguard2influxdb adguard2influxdb

Upgrading

If you upgrade from a version < 0.3 make sure to perform following steps

• update your virtual env pip3 install -r requirements.txt
• use the updated config and add the credentials and addresses from your old config

License

You can check out the full license here

This project is licensed under the terms of the MIT license.