This is the buildsystem for the OpenWrt Linux distribution (Attitude Adjustment).

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org

----------

Backported devices:
	GL Innovations GL-Inet_v1
	GL Innovations AR-150
	TP-LINK TL-WA850RE_v1
	TP-LINK TL-WA750RE_v1
	TP-LINK TL-WA801ND_v1
	TP-LINK TL-WA801ND_v2
	TP-LINK TL-WA901ND_v3
	TP-LINK TL-MR3040_v2
	TP-LINK TL-MR11U_v2
	TP-LINK TL-MR10U_v1
	TP-LINK TL-WR710_v1
	TP-LINK TL-MR13U_v1
	TP-LINK TL-MR3420-v2
	TP-LINK TL-WR842-v2
	TP-LINK TL-1043ND_v2
	TP-LINK TL-1043ND_v3