Update Docs

docs/guide/getting-started.md

@@ -6,7 +6,7 @@ Thank you for using Doorman <3
 
 ## Setup
 
-### Network Connection
+### Step 1: Connect to Wi-Fi
 When you power on your Doorman-S3 for the first time it will blink fast (orange) and opens a new Access Point called `Doorman-S3 Setup`.
 You can setup your WiFi credentials via Access Point, Improv Serial or Improv Bluetooth.
 
@@ -15,20 +15,18 @@ The Access Point password is `open-sesame`.
 When you connect to the Access Point, the web interface should open automatically (see also login to network notifications).\
 If that does not work, you can also navigate to http://192.168.4.1/ manually in your browser.
 
-
-
 ::: tip
 You can benefit from automatic setup in Home Assistant, if your Home Assistant server has Bluetooth enabled.
 
 And thanks to mDNS support, Home Assistant will find your Doorman out of the box after connecting it to WiFi.
 :::
 ![Home Assistant Discovery](./images/discovery.png)
 
-### Home Assistant
+### Step 2: Connect to Home Assistant
 After connecting Doorman to your network it will blink slowly (blue) and should be automatically discovered by Home Assistant.
 Just click on `Configure` to add the newly discovered ESPHome node.
 
-### Obtaining Bus commands
+### Step 3: Obtaining Bus commands
 ::: warning Important
 You need to connect Doorman to your intercom first. Take a look at the [Wiring](#wiring) section.
 :::