Skip to content

AZQ1994/simple_json

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

19 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

SimpleJson

A simple & fast solution for Rails JSON rendering.

Get started

In Gemfile

gem 'simple_json'

In controller

class ApplicationController < ActionController::Base
  include SimpleJson::SimpleJsonRenderable

  ...
end

In view, create your simple_json template file in app/views.

# {controller_name}/{action_name}.simple_json.rb
{
  key1: @value1,
  key2: helper(@value2),
  key3: partial!("partial_path", param1: param1, param2: param2)
}

And, partial as well.

->(param1:, param2:) {
  {
    key1: param1,
    key2: param2,
  }
}

That's all!

Have fun!

Special thanks

This project is built on work of jb.

Template Syntax

SimpleJson templates are simply lambda objects that return data(Hashes or Arrays) for json.

-> {
  {
    key: @value,
  }
}

When no parameters specified, -> { and } can be omitted.

{
  key: @value,
}

Use partial! method to call another template in template. Note that path is always required. Also, there is no difference between partials and templates, so that you cannot omit _ before template name. (So, no omitting for template path is allowed.)

# app/views/posts/show.simple_json.rb
{
  title: @post.title,
  comments: @post.comments.map { |comment| partial!('comments/_comment', comment: comment) }
}
# app/views/comments/_comment.simple_json.rb
->(comment:) {
  {
    body: comment.body
  }
}

Cache helpers of simple_json is similar to jbuilder.

cache! key, options do
  data_to_cache
end

Cache helpers uses Rails.cache to cache, so array keys, expirations are available. Make sure perform_caching is enabled.

cache! [key1, key2], expires_in: 10.minutes do
  data_to_cache
end

cache_if! is also available

cache_if! boolean, key1, options do
  data_to_cache
end

You can set key_prefix for caching like this

SimpleJson.cache_key_prefix = "MY_PREFIX"

Configurations

Load all templates on boot. (For production) Templates loaded will not load again, so it is not recommended in development environment.

# config/environments/production.rb
SimpleJson.enable_template_cache

The default path for templates is app/views, you can change it by

SimpleJson.template_paths.append("app/simple_jsons")
# or
SimpleJson.template_paths=["app/views", "app/simple_jsons"]

Note that these paths should not be eager loaded cause using .rb as suffix.

SimpleJson uses Oj as json serializer by default. Modules with #encode and #decode method can be used here.

SimpleJson.json_module = ActiveSupport::JSON

The Generator

SimpleJson extends the default Rails scaffold generator and adds some simple_json templates. If you don't need them, please configure like so.

Rails.application.config.generators.simple_json false

Benchmarks

Here're the results of a benchmark (which you can find here in this repo) rendering a collection to JSON.

RAILS_ENV=development

% ./bin/benchmark.sh

* Rendering 10 partials via render_partial
Warming up --------------------------------------
                  jb   257.000  i/100ms
            jbuilder   108.000  i/100ms
         simple_json     2.039k i/100ms
Calculating -------------------------------------
                  jb      2.611k (± 7.1%) i/s -     13.107k in   5.046110s
            jbuilder      1.084k (± 3.5%) i/s -      5.508k in   5.088845s
         simple_json     20.725k (± 4.4%) i/s -    103.989k in   5.026914s

Comparison:
         simple_json:    20725.5 i/s
                  jb:     2610.5 i/s - 7.94x  (± 0.00) slower
            jbuilder:     1083.8 i/s - 19.12x  (± 0.00) slower


* Rendering 100 partials via render_partial
Warming up --------------------------------------
                  jb    88.000  i/100ms
            jbuilder    14.000  i/100ms
         simple_json   290.000  i/100ms
Calculating -------------------------------------
                  jb    928.202  (± 5.0%) i/s -      4.664k in   5.037314s
            jbuilder    137.980  (± 6.5%) i/s -    700.000  in   5.094658s
         simple_json      2.931k (± 5.2%) i/s -     14.790k in   5.060707s

Comparison:
         simple_json:     2931.1 i/s
                  jb:      928.2 i/s - 3.16x  (± 0.00) slower
            jbuilder:      138.0 i/s - 21.24x  (± 0.00) slower


* Rendering 1000 partials via render_partial
Warming up --------------------------------------
                  jb    11.000  i/100ms
            jbuilder     1.000  i/100ms
         simple_json    29.000  i/100ms
Calculating -------------------------------------
                  jb    106.150  (± 5.7%) i/s -    539.000  in   5.094255s
            jbuilder     13.012  (± 7.7%) i/s -     65.000  in   5.054016s
         simple_json    271.683  (± 5.2%) i/s -      1.363k in   5.030646s

Comparison:
         simple_json:      271.7 i/s
                  jb:      106.1 i/s - 2.56x  (± 0.00) slower
            jbuilder:       13.0 i/s - 20.88x  (± 0.00) slower

RAILS_ENV=production

% RAILS_ENV=production ./bin/benchmark.sh

* Rendering 10 partials via render_partial
Warming up --------------------------------------
                  jb   246.000  i/100ms
            jbuilder    97.000  i/100ms
         simple_json     1.957k i/100ms
Calculating -------------------------------------
                  jb      2.611k (± 4.1%) i/s -     13.038k in   5.002304s
            jbuilder    972.031  (± 4.7%) i/s -      4.850k in   5.001200s
         simple_json     20.383k (± 3.8%) i/s -    101.764k in   4.999989s

Comparison:
         simple_json:    20382.8 i/s
                  jb:     2611.3 i/s - 7.81x  (± 0.00) slower
            jbuilder:      972.0 i/s - 20.97x  (± 0.00) slower


* Rendering 100 partials via render_partial
Warming up --------------------------------------
                  jb    90.000  i/100ms
            jbuilder    11.000  i/100ms
         simple_json   280.000  i/100ms
Calculating -------------------------------------
                  jb    883.446  (± 4.8%) i/s -      4.410k in   5.003438s
            jbuilder    119.932  (± 8.3%) i/s -    605.000  in   5.085382s
         simple_json      2.886k (± 4.2%) i/s -     14.560k in   5.054327s

Comparison:
         simple_json:     2885.7 i/s
                  jb:      883.4 i/s - 3.27x  (± 0.00) slower
            jbuilder:      119.9 i/s - 24.06x  (± 0.00) slower


* Rendering 1000 partials via render_partial
Warming up --------------------------------------
                  jb    12.000  i/100ms
            jbuilder     1.000  i/100ms
         simple_json    32.000  i/100ms
Calculating -------------------------------------
                  jb    124.627  (± 4.8%) i/s -    624.000  in   5.018515s
            jbuilder     12.710  (± 7.9%) i/s -     64.000  in   5.073018s
         simple_json    314.896  (± 3.2%) i/s -      1.600k in   5.086509s

Comparison:
         simple_json:      314.9 i/s
                  jb:      124.6 i/s - 2.53x  (± 0.00) slower
            jbuilder:       12.7 i/s - 24.78x  (± 0.00) slower

Migrating from Jbuilder

When migrating from Jbuilder, you can include Migratable in controller for migrating mode.

include SimpleJson::SimpleJsonRenderable
include SimpleJson::Migratable

In migrating mode

  • Comparision will be performed for simple_json and ActionView render(Jbuilder) result.
  • simple_json partials not found will use Jbuilder partial as an alternative.

Note that render will be performed twice, so using it in production mode is not recommended.

Contributing

Pull requests are welcome on GitHub at https://github.com/aktsk/simple_json.

License

The gem is available as open source under the terms of the MIT License.

Packages

No packages published

Languages

  • Ruby 86.5%
  • HTML 9.4%
  • JavaScript 2.2%
  • CSS 1.4%
  • Shell 0.5%