Setting Hyper to make it work with WSL2 #5790
-
|
My system info:
On WSL, I've installed: neofetch, zsh, oh-my-zsh. Here is my config:"use strict";
// Future versions of Hyper may add additional config options,
// which will not automatically be merged into this file.
// See https://hyper.is#cfg for all currently supported options.
module.exports = {
config: {
// choose either `'stable'` for receiving highly polished,
// or `'canary'` for less polished but more frequent updates
updateChannel: 'stable',
// default font size in pixels for all tabs
fontSize: 16,
// font family with optional fallbacks
fontFamily: 'MesloLGS NF',
// default font weight: 'normal' or 'bold'
fontWeight: 'normal',
// font weight for bold characters: 'normal' or 'bold'
fontWeightBold: 'bold',
// line height as a relative unit
lineHeight: 1,
// letter spacing as a relative unit
letterSpacing: 0,
// terminal cursor background color and opacity (hex, rgb, hsl, hsv, hwb or cmyk)
cursorColor: 'rgba(248,28,229,0.8)',
// terminal text color under BLOCK cursor
cursorAccentColor: '#000',
// `'BEAM'` for |, `'UNDERLINE'` for _, `'BLOCK'` for █
cursorShape: 'BEAM',
// set to `true` (without backticks and without quotes) for blinking cursor
cursorBlink: true,
// color of the text
foregroundColor: '#fff',
// terminal background color
// opacity is only supported on macOS
backgroundColor: '#000',
// terminal selection color
selectionColor: 'rgba(248,28,229,0.3)',
// border color (window, tabs)
borderColor: '#333',
// custom CSS to embed in the main window
css: '',
// custom CSS to embed in the terminal window
termCSS: '',
// set custom startup directory (must be an absolute path)
workingDirectory: '',
// if you're using a Linux setup which show native menus, set to false
// default: `true` on Linux, `true` on Windows, ignored on macOS
showHamburgerMenu: '',
// set to `false` (without backticks and without quotes) if you want to hide the minimize, maximize and close buttons
// additionally, set to `'left'` if you want them on the left, like in Ubuntu
// default: `true` (without backticks and without quotes) on Windows and Linux, ignored on macOS
showWindowControls: 'left',
// custom padding (CSS format, i.e.: `top right bottom left`)
padding: '12px 14px',
// the full list. if you're going to provide the full color palette,
// including the 6 x 6 color cubes and the grayscale map, just provide
// an array here instead of a color map object
colors: {
black: '#000000',
red: '#C51E14',
green: '#1DC121',
yellow: '#C7C329',
blue: '#0A2FC4',
magenta: '#C839C5',
cyan: '#20C5C6',
white: '#C7C7C7',
lightBlack: '#686868',
lightRed: '#FD6F6B',
lightGreen: '#67F86F',
lightYellow: '#FFFA72',
lightBlue: '#6A76FB',
lightMagenta: '#FD7CFC',
lightCyan: '#68FDFE',
lightWhite: '#FFFFFF',
limeGreen: '#32CD32',
lightCoral: '#F08080',
},
// the shell to run when spawning a new session (i.e. /usr/local/bin/fish)
// if left empty, your system's login shell will be used by default
//
// Windows
// - Make sure to use a full path if the binary name doesn't work
// - Remove `--login` in shellArgs
//
// Windows Subsystem for Linux (WSL) - previously Bash on Windows
// - Example: `C:\\Windows\\System32\\wsl.exe`
//
// Git-bash on Windows
// - Example: `C:\\Program Files\\Git\\bin\\bash.exe`
//
// PowerShell on Windows
// - Example: `C:\\WINDOWS\\System32\\WindowsPowerShell\\v1.0\\powershell.exe`
//
shell: "C:\\Windows\\System32\\wsl.exe",
// for setting shell arguments (i.e. for using interactive shellArgs: `['-i']`)
// by default `['--login']` will be used
shellArgs: [''],
// for environment variables
// env: { TERM: 'cygwin' },
env: { },
// Supported Options:
// 1. 'SOUND' -> Enables the bell as a sound
// 2. false: turns off the bell
bell: 'SOUND',
// An absolute file path to a sound file on the machine.
// bellSoundURL: '/path/to/sound/file',
// if `true` (without backticks and without quotes), selected text will automatically be copied to the clipboard
copyOnSelect: false,
// if `true` (without backticks and without quotes), hyper will be set as the default protocol client for SSH
defaultSSHApp: true,
// if `true` (without backticks and without quotes), on right click selected text will be copied or pasted if no
// selection is present (`true` by default on Windows and disables the context menu feature)
quickEdit: false,
// choose either `'vertical'`, if you want the column mode when Option key is hold during selection (Default)
// or `'force'`, if you want to force selection regardless of whether the terminal is in mouse events mode
// (inside tmux or vim with mouse mode enabled for example).
macOptionSelectionMode: 'vertical',
// Whether to use the WebGL renderer. Set it to false to use canvas-based
// rendering (slower, but supports transparent backgrounds)
webGLRenderer: false,
// keypress required for weblink activation: [ctrl|alt|meta|shift]
// todo: does not pick up config changes automatically, need to restart terminal :/
webLinksActivationKey: '',
// if `false` (without backticks and without quotes), Hyper will use ligatures provided by some fonts
disableLigatures: true,
// for advanced config flags please refer to https://hyper.is/#cfg
pokemon: 'Legendary', // Choose your favorite pokemon theme
unibody: 'false', // Choose the color of the window header
poketab: 'true',
hyperBorder: {
animate: true,
borderRadiusOuter: '4px',
},
opacity: {
focus: 0.95,
blur: 0.8
}
},
// a list of plugins to fetch and install from npm
// format: [@org/]project[#version]
// examples:
// `hyperpower`
// `@company/project`
// `project#1.0.1`
plugins: [// "hyper-pokemon",
"hypercwd", "hyper-snazzy", "hyperborder", "hyper-opacity", "hyper-tab-icons-plus"],
// in development, you can create a directory under
// `~/.hyper_plugins/local/` and include it here
// to load it and avoid it being `npm install`ed
localPlugins: [],
keymaps: {
// Example
'window:devtools': 'ctrl+shift+i',
},
};
//# sourceMappingURL=config-default.js.mapThere is a wsl.exe here:
A screen record about the issue: hyper.mp4 |
Beta Was this translation helpful? Give feedback.
Answered by
LabhanshAgrawal
Jul 25, 2021
Replies: 1 comment 6 replies
-
|
Any specific reason behind running it as admin? |
Beta Was this translation helpful? Give feedback.
6 replies
-
|
Tried a fresh reinstall but doesn't work Config"use strict";
// Future versions of Hyper may add additional config options,
// which will not automatically be merged into this file.
// See https://hyper.is#cfg for all currently supported options.
module.exports = {
config: {
// choose either `'stable'` for receiving highly polished,
// or `'canary'` for less polished but more frequent updates
updateChannel: 'stable',
// default font size in pixels for all tabs
fontSize: 12,
// font family with optional fallbacks
fontFamily: 'Menlo, "DejaVu Sans Mono", Consolas, "Lucida Console", monospace',
// default font weight: 'normal' or 'bold'
fontWeight: 'normal',
// font weight for bold characters: 'normal' or 'bold'
fontWeightBold: 'bold',
// line height as a relative unit
lineHeight: 1,
// letter spacing as a relative unit
letterSpacing: 0,
// terminal cursor background color and opacity (hex, rgb, hsl, hsv, hwb or cmyk)
cursorColor: 'rgba(248,28,229,0.8)',
// terminal text color under BLOCK cursor
cursorAccentColor: '#000',
// `'BEAM'` for |, `'UNDERLINE'` for _, `'BLOCK'` for █
cursorShape: 'BLOCK',
// set to `true` (without backticks and without quotes) for blinking cursor
cursorBlink: false,
// color of the text
foregroundColor: '#fff',
// terminal background color
// opacity is only supported on macOS
backgroundColor: '#000',
// terminal selection color
selectionColor: 'rgba(248,28,229,0.3)',
// border color (window, tabs)
borderColor: '#333',
// custom CSS to embed in the main window
css: '',
// custom CSS to embed in the terminal window
termCSS: '',
// set custom startup directory (must be an absolute path)
workingDirectory: '',
// if you're using a Linux setup which show native menus, set to false
// default: `true` on Linux, `true` on Windows, ignored on macOS
showHamburgerMenu: '',
// set to `false` (without backticks and without quotes) if you want to hide the minimize, maximize and close buttons
// additionally, set to `'left'` if you want them on the left, like in Ubuntu
// default: `true` (without backticks and without quotes) on Windows and Linux, ignored on macOS
showWindowControls: '',
// custom padding (CSS format, i.e.: `top right bottom left`)
padding: '12px 14px',
// the full list. if you're going to provide the full color palette,
// including the 6 x 6 color cubes and the grayscale map, just provide
// an array here instead of a color map object
colors: {
black: '#000000',
red: '#C51E14',
green: '#1DC121',
yellow: '#C7C329',
blue: '#0A2FC4',
magenta: '#C839C5',
cyan: '#20C5C6',
white: '#C7C7C7',
lightBlack: '#686868',
lightRed: '#FD6F6B',
lightGreen: '#67F86F',
lightYellow: '#FFFA72',
lightBlue: '#6A76FB',
lightMagenta: '#FD7CFC',
lightCyan: '#68FDFE',
lightWhite: '#FFFFFF',
limeGreen: '#32CD32',
lightCoral: '#F08080',
},
// the shell to run when spawning a new session (i.e. /usr/local/bin/fish)
// if left empty, your system's login shell will be used by default
//
// Windows
// - Make sure to use a full path if the binary name doesn't work
// - Remove `--login` in shellArgs
//
// Windows Subsystem for Linux (WSL) - previously Bash on Windows
// - Example: `C:\\Windows\\System32\\wsl.exe`
//
// Git-bash on Windows
// - Example: `C:\\Program Files\\Git\\bin\\bash.exe`
//
// PowerShell on Windows
// - Example: `C:\\WINDOWS\\System32\\WindowsPowerShell\\v1.0\\powershell.exe`
//
// Cygwin
// - Example: `C:\\cygwin64\\bin\\bash.exe`
shell: 'C:\\Windows\\System32\\wsl.exe',
// for setting shell arguments (i.e. for using interactive shellArgs: `['-i']`)
// by default `['--login']` will be used
shellArgs: [''],
// for environment variables
env: {},
// Supported Options:
// 1. 'SOUND' -> Enables the bell as a sound
// 2. false: turns off the bell
bell: 'SOUND',
// An absolute file path to a sound file on the machine.
// bellSoundURL: '/path/to/sound/file',
// if `true` (without backticks and without quotes), selected text will automatically be copied to the clipboard
copyOnSelect: false,
// if `true` (without backticks and without quotes), hyper will be set as the default protocol client for SSH
defaultSSHApp: true,
// if `true` (without backticks and without quotes), on right click selected text will be copied or pasted if no
// selection is present (`true` by default on Windows and disables the context menu feature)
quickEdit: false,
// choose either `'vertical'`, if you want the column mode when Option key is hold during selection (Default)
// or `'force'`, if you want to force selection regardless of whether the terminal is in mouse events mode
// (inside tmux or vim with mouse mode enabled for example).
macOptionSelectionMode: 'vertical',
// Whether to use the WebGL renderer. Set it to false to use canvas-based
// rendering (slower, but supports transparent backgrounds)
webGLRenderer: false,
// keypress required for weblink activation: [ctrl|alt|meta|shift]
// todo: does not pick up config changes automatically, need to restart terminal :/
webLinksActivationKey: '',
// if `false` (without backticks and without quotes), Hyper will use ligatures provided by some fonts
disableLigatures: true,
// for advanced config flags please refer to https://hyper.is/#cfg
},
// a list of plugins to fetch and install from npm
// format: [@org/]project[#version]
// examples:
// `hyperpower`
// `@company/project`
// `project#1.0.1`
plugins: [],
// in development, you can create a directory under
// `~/.hyper_plugins/local/` and include it here
// to load it and avoid it being `npm install`ed
localPlugins: [],
keymaps: {
// Example
// 'window:devtools': 'cmd+alt+o',
},
};
//# sourceMappingURL=config-default.js.mapfresh.mp4 |
Beta Was this translation helpful? Give feedback.
-
|
Running shell: 'wsl.exe',
shellArgs: ['-d Ubuntu-20.04'],
|
Beta Was this translation helpful? Give feedback.
-
|
separate out args as |
Beta Was this translation helpful? Give feedback.
-
|
You can run |
Beta Was this translation helpful? Give feedback.
-
This is what I need, it works. Thanks
|
Beta Was this translation helpful? Give feedback.
Answer selected by
titieo
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Any specific reason behind running it as admin?
You can run
hyper -vfrom cmd to see the log for main process.Also confirm once if the font is installed and name is correct, try the default value of
'Menlo, "DejaVu Sans Mono", Consolas, "Lucida Console", monospace'also. Since the font name you are using has a space, you have to put it in double quotes, write it as'"MesloLGS NF"'.