OpenWest and theTransistor bring you another fun conference badge.
##Badge Parts List
- 1x Badge PCB
- 1x ATTiny85
- 1x 3xAAA Battery Holder
- 1x Push Button
- 1x Power Switch
- 5x RGB LEDs (WS2812b)
- 6x 0.1uF Capacitors, Ceramic
##Badge Add-On Kit Parts List
- 2x Button Board PCBs
- 1x Parallax Propeller mCU
- 1x 40 Pin Socket for mCU
- 1x 2.2inch SPI TFT Display
- ILI9341 Controller
- 320x240 Resolution
- 1x 5mhz Crystal Oscillator (mCU runs at 80mhz)
- 1x 24LC256 EEPROM
- 1x FTD434P MOSFET
- 1x 3.3v LDO Voltage Regulator
- 1x Tilt Switch
- 6x Push Buttons
- 1x Power Switch
- 10x 10k Resistors (labeled 103)
- 2x 10 ohm Resistors (labeled 100)
- 2x 1uF Ceramic Capacitors (with clear backing)
- 2x 0.1uF Ceramic Capacitors (with white backing)
- 1x 40 Pin Header Strip
- 1x SD to microSD Card Adapter
- 1x 128MB microSD Card
##Credits:
Electronics Work & Processing
- Compukidmike
- Devino
Original Design
- D3c4f
QA, Assembly, & Loading
- Animcogn
- Anthony (Demos)
- Trilog
- Nemus
- Evan (Sausage Assassin)
- Damon (Remote)
- Compukidmike
- Yukaia
- D3c4f
- ProgrammerQ
- aarobc (l3mur)
- Tyrel
- AJ Oneal
- Jay (GraySands)
Special Thanks
- MindJuJu
- OpenWest Core Team
- This wonderful community!
##Questions and Comments Questions and comments can be directed twards the following forms of communication:
- #dc801 on freenode
- d3c4f [at] thetransistor [dot] com