Commands to diyHue does not work #632

aro28 · 2018-11-17T07:37:44Z

Hi Shiva!
A few days ago, I began to notice strange behavior, when i try to send voice command with with wrong light's name GassisPi freezes and stops answering me. Also, "Ok, Google" command stops working.
I have Sonoff - Tasmota devices and i've added them in config file. In same time Hue Bridge is runing on same Pi. But when i send voice commands with undefined light name, my gassistpi-ok-google.service freezes with below error..The diyhue guys seems changed the call patterns.

● gassistpi-ok-google.service - Google Assistant-Voice
Loaded: loaded (/lib/systemd/system/gassistpi-ok-google.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2018-11-15 20:46:57 +06; 21h ago
Main PID: 423 (python)
CGroup: /system.slice/gassistpi-ok-google.service
└─423 /home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id saved-model-id

Nov 16 18:06:54 magicmirror python[423]: File "/home/pi/GassistPi/src/actions.py", line 1247, in hue_control
Nov 16 18:06:54 magicmirror python[423]: currentxval=hueconfig['lights'][lightindex]['state']['xy'][0]
Nov 16 18:06:54 magicmirror python[423]: KeyError: 'xy'
Nov 16 18:06:54 magicmirror python[423]: During handling of the above exception, another exception occurred:
Nov 16 18:06:54 magicmirror python[423]: Traceback (most recent call last):
Nov 16 18:06:54 magicmirror python[423]: File "/home/pi/GassistPi/src/main.py", line 673, in
Nov 16 18:06:54 magicmirror python[423]: Myassistant().main()
Nov 16 18:06:54 magicmirror python[423]: File "/home/pi/GassistPi/src/main.py", line 457, in main
Nov 16 18:06:54 magicmirror python[423]: except Keyerror:
Nov 16 18:06:54 magicmirror python[423]: NameError: name 'Keyerror' is not defined

aro28 · 2018-11-17T08:30:18Z

shivasiddharth · 2018-11-24T23:07:09Z

Can you check if the light that you requested has 'xy' state from the config.json. Load your config.json in this site https://jsoneditoronline.org this will make searching easy. On the right top, choose Open and open from disk and then select your config.json file.
Was the triggering that you requested for a switch or a light ?

aro28 · 2018-11-28T09:38:06Z

@shivasiddharth I don't have "config.json" file, only config.yaml and config.js. Which one should i upload?
Switch was triggered and light switches on/off.

aro28 · 2018-11-28T09:43:52Z

For instance. I sent: " Turn Kitchen On" command and it's stopped working and got that error.
I have Kitchen light. But somehow it crashed despite my existing lights name.

aro28 · 2018-11-28T09:45:11Z

![screenshot from 2018-11-28 15-43-42](https://user-images.githubusercontent.com/25077676/49143068-6d203680-f324-11e8-94a8-cde8a6710d15

I have Hall, Kitchen and Lobby lights.

aro28 · 2018-11-28T10:15:47Z

As i remember this issue was started after you changed diyHue installation process. You removed diyHue from GassistPi installation script. Now we should follow the guidelines given in the diyHue's Wiki to setup the Emulated Hue Service.

shivasiddharth · 2018-11-29T12:10:12Z

YOu should have a config.json file in the /opt/hue-emulator/ directory. SOmething like this. https://github.com/mariusmotea/diyHue/blob/master/BridgeEmulator/config.json

aro28 · 2018-11-29T13:10:56Z

I just realized that it's not relared light name. It crashes when i use any lights name.

● gassistpi-ok-google.service - Google Assistant-Voice
Loaded: loaded (/lib/systemd/system/gassistpi-ok-google.service; enabled; vendor preset: enabled)
Active: active (running) since Thu 2018-11-29 16:28:31 +06; 2h 39min ago
Main PID: 428 (python)
CGroup: /system.slice/gassistpi-ok-google.service
└─428 /home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id saved-model-id

Nov 29 19:07:52 magicmirror python[428]: File "/home/pi/GassistPi/src/actions.py", line 1262, in hue_control
Nov 29 19:07:52 magicmirror python[428]: currentxval=hueconfig['lights'][lightindex]['state']['xy'][0]
Nov 29 19:07:52 magicmirror python[428]: KeyError: 'xy'
Nov 29 19:07:52 magicmirror python[428]: During handling of the above exception, another exception occurred:
Nov 29 19:07:52 magicmirror python[428]: Traceback (most recent call last):
Nov 29 19:07:52 magicmirror python[428]: File "/home/pi/GassistPi/src/main.py", line 692, in
Nov 29 19:07:52 magicmirror python[428]: Myassistant().main()
Nov 29 19:07:52 magicmirror python[428]: File "/home/pi/GassistPi/src/main.py", line 476, in main
Nov 29 19:07:52 magicmirror python[428]: except Keyerror:
Nov 29 19:07:52 magicmirror python[428]: NameError: name 'Keyerror' is not defined

shivasiddharth · 2018-11-29T13:16:27Z

Manually run the assistant.
Add the following line print(hueconfig['lights'][lightindex]) above

GassistPi/src/actions.py

Line 1262 in f9b3994

currentxval=hueconfig['lights'][lightindex]['state']['xy'][0]

, give the command, and paste the terminal output.

shivasiddharth · 2018-11-29T17:02:59Z

I guess you have placed the print command in the wrong place. Why is even the print command getting printed ?

aro28 · 2018-11-29T17:03:50Z

I've added above line "print(hueconfig['lights'][lightindex])" into actions.py file and run manually.
I got below error after sending voice command:

This device is not registered. This means you will not be able to use
Device Actions or see your device in Assistant Settings. In order to
register this device follow instructions at:

https://developers.google.com/assistant/sdk/guides/library/python/embed/register-device

ON_MUTED_CHANGED:
{"is_muted": false}
ON_MUTED_CHANGED:
{"is_muted": false}
ON_START_FINISHED
ON_START_FINISHED
ON_CONVERSATION_TURN_STARTED

ON_CONVERSATION_TURN_STARTED
ON_END_OF_UTTERANCE
ON_END_OF_UTTERANCE
ON_RECOGNIZING_SPEECH_FINISHED:
{"text": "turn on Lobby"}
ON_RECOGNIZING_SPEECH_FINISHED:
{"text": "turn on Lobby"}
{'swversion': '1.29.0_r21169', 'swconfigid': '321D79EA', 'modelid': 'LWB014', 'manufacturername': 'Philips', 'uniqueid': '00:17:88:01:03:3d:b9:eb-0b', 'productid': 'Philips-LWB014-1-A19DLv4', 'state': {'reachable': True, 'bri': 254, 'alert': 'none', 'mode': 'homeautomation', 'on': True}, 'productname': 'Hue white lamp', 'swupdate': {'state': 'noupdates', 'lastinstall': None}, 'capabilities': {'control': {'mindimlevel': 5000, 'maxlumen': 840}, 'certified': True, 'streaming': {'proxy': False, 'renderer': False}}, 'type': 'Dimmable light', 'config': {'direction': 'omnidirectional', 'function': 'functional', 'archetype': 'classicbulb'}, 'name': 'Lobby'}
ERROR:main:name 'Keyerror' is not defined
Traceback (most recent call last):
File "/home/pi/GassistPi/src/main.py", line 474, in main
hue_control(str(usrcmd).lower(),str(i),str(hueconfig['lights_address'][str(i)]['ip']))
File "/home/pi/GassistPi/src/actions.py", line 1263, in hue_control
currentxval=hueconfig['lights'][lightindex]['state']['xy'][0]
KeyError: 'xy'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/home/pi/GassistPi/src/main.py", line 692, in
Myassistant().main()
File "/home/pi/GassistPi/src/main.py", line 476, in main
except Keyerror:
NameError: name 'Keyerror' is not defined

aro28 · 2018-11-29T17:11:06Z

I guess you have placed the print command in the wrong place. Why is even the print command getting printed ?
Yes. Now it seems i did right. See above output. Thanks!

aro28 · 2018-11-29T17:30:51Z

Sorry. i forgot to say that i reinstalled diyHue program and not able to link emulated bridge with Hue app.
Working on it now.

aro28 · 2018-11-30T09:18:15Z

Hi @shiva
I confirm that issue is happening with Tasmota device only. If i indicate sonoff-Tasmota device in config.yaml file than i'm getting below error message. If i do not input my Sonoff device ip address than everything is ok.

pi@raspberrypi:~ $ sudo systemctl status gassistpi.service
● gassistpi.service - Google Assistant-Voice
Loaded: loaded (/lib/systemd/system/gassistpi.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2018-11-30 15:14:22 +06; 1min 21s ago
Main PID: 392 (python)
CGroup: /system.slice/gassistpi.service
└─392 /home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id xxxxxxx

Nov 30 15:15:32 raspberrypi python[392]: ON_CONVERSATION_TURN_STARTED
Nov 30 15:15:32 raspberrypi python[392]: ON_CONVERSATION_TURN_STARTED
Nov 30 15:15:35 raspberrypi python[392]: ON_END_OF_UTTERANCE
Nov 30 15:15:35 raspberrypi python[392]: ON_END_OF_UTTERANCE
Nov 30 15:15:35 raspberrypi python[392]: ON_RECOGNIZING_SPEECH_FINISHED:
Nov 30 15:15:35 raspberrypi python[392]: {"text": "turn on living light"}
Nov 30 15:15:35 raspberrypi python[392]: ON_RECOGNIZING_SPEECH_FINISHED:
Nov 30 15:15:35 raspberrypi python[392]: {"text": "turn on living light"}
Nov 30 15:15:40 raspberrypi python[392]: Tunring on living light
Nov 30 15:15:42 raspberrypi python[392]: WARNING:gtts.tts:Unable to get language list: 'NoneType' object is not subscriptable
pi@raspberrypi:~ $ sudo systemctl status gassistpi.service
● gassistpi.service - Google Assistant-Voice
Loaded: loaded (/lib/systemd/system/gassistpi.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2018-11-30 15:14:22 +06; 1min 22s ago
Main PID: 392 (python)
CGroup: /system.slice/gassistpi.service
└─392 /home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id xxxxxxxxxxxxxxx

Nov 30 15:15:44 raspberrypi python[392]: tts.save(ttsfilename)
Nov 30 15:15:44 raspberrypi python[392]: File "/home/pi/env/lib/python3.5/site-packages/gtts/tts.py", line 247, in save
Nov 30 15:15:44 raspberrypi python[392]: self.write_to_fp(f)
Nov 30 15:15:44 raspberrypi python[392]: File "/home/pi/env/lib/python3.5/site-packages/gtts/tts.py", line 187, in write_to_fp
Nov 30 15:15:44 raspberrypi python[392]: part_tk = self.token.calculate_token(part)
Nov 30 15:15:44 raspberrypi python[392]: File "/home/pi/env/lib/python3.5/site-packages/gtts_token/gtts_token.py", line 28, in calculate_token
Nov 30 15:15:44 raspberrypi python[392]: seed = self._get_token_key()
Nov 30 15:15:44 raspberrypi python[392]: File "/home/pi/env/lib/python3.5/site-packages/gtts_token/gtts_token.py", line 57, in _get_token_key
Nov 30 15:15:44 raspberrypi python[392]: tkk_expr = re.search(".?(TKK=.?;)W.*?", line).group(1)
Nov 30 15:15:44 raspberrypi python[392]: AttributeError: 'NoneType' object has no attribute 'group'

shivasiddharth · 2018-11-30T10:09:57Z

Run the following:

source env/bin/activate
pip install -U gTTS
pip install -U gTTS-token

aro28 · 2018-11-30T10:13:13Z

pi@raspberrypi:~ $ source env/bin/activate
(env) pi@raspberrypi:~ $ pip install -U gTTS
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already up-to-date: gTTS in ./env/lib/python3.5/site-packages (2.0.1)
Requirement already satisfied, skipping upgrade: bs4 in ./env/lib/python3.5/site-packages (from gTTS) (0.0.1)
Requirement already satisfied, skipping upgrade: click in ./env/lib/python3.5/site-packages (from gTTS) (6.7)
Requirement already satisfied, skipping upgrade: gtts-token in ./env/lib/python3.5/site-packages (from gTTS) (1.1.2)
Requirement already satisfied, skipping upgrade: six in ./env/lib/python3.5/site-packages (from gTTS) (1.11.0)
Requirement already satisfied, skipping upgrade: requests in ./env/lib/python3.5/site-packages (from gTTS) (2.20.1)
Requirement already satisfied, skipping upgrade: beautifulsoup4 in ./env/lib/python3.5/site-packages (from bs4->gTTS) (4.6.3)
Requirement already satisfied, skipping upgrade: urllib3<1.25,>=1.21.1 in ./env/lib/python3.5/site-packages (from requests->gTTS) (1.24.1)
Requirement already satisfied, skipping upgrade: chardet<3.1.0,>=3.0.2 in ./env/lib/python3.5/site-packages (from requests->gTTS) (3.0.4)
Requirement already satisfied, skipping upgrade: idna<2.8,>=2.5 in ./env/lib/python3.5/site-packages (from requests->gTTS) (2.7)
Requirement already satisfied, skipping upgrade: certifi>=2017.4.17 in ./env/lib/python3.5/site-packages (from requests->gTTS) (2018.11.29)
(env) pi@raspberrypi:~ $ pip install -U gTTS-token
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting gTTS-token
Downloading https://www.piwheels.org/simple/gtts-token/gTTS_token-1.1.3-py3-none-any.whl
Requirement already satisfied, skipping upgrade: requests in ./env/lib/python3.5/site-packages (from gTTS-token) (2.20.1)
Requirement already satisfied, skipping upgrade: idna<2.8,>=2.5 in ./env/lib/python3.5/site-packages (from requests->gTTS-token) (2.7)
Requirement already satisfied, skipping upgrade: urllib3<1.25,>=1.21.1 in ./env/lib/python3.5/site-packages (from requests->gTTS-token) (1.24.1)
Requirement already satisfied, skipping upgrade: chardet<3.1.0,>=3.0.2 in ./env/lib/python3.5/site-packages (from requests->gTTS-token) (3.0.4)
Requirement already satisfied, skipping upgrade: certifi>=2017.4.17 in ./env/lib/python3.5/site-packages (from requests->gTTS-token) (2018.11.29)
Installing collected packages: gTTS-token
Found existing installation: gTTS-token 1.1.2
Uninstalling gTTS-token-1.1.2:
Successfully uninstalled gTTS-token-1.1.2
Successfully installed gTTS-token-1.1.3

shivasiddharth · 2018-11-30T10:17:22Z

Now try the sonoff commands, it should not crash.

aro28 · 2018-11-30T10:21:28Z

pi@raspberrypi:~ $ sudo systemctl status gassistpi.service
● gassistpi.service - Google Assistant-Voice
Loaded: loaded (/lib/systemd/system/gassistpi.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2018-11-30 16:19:30 +06; 1min 4s ago
Main PID: 382 (python)
CGroup: /system.slice/gassistpi.service
└─382 /home/pi/env/bin/python -u /home/pi/GassistPi/src/main.py --device_model_id xxxxxxxxxxxxx

Nov 30 16:20:35 raspberrypi python[382]: response = meth(req, response)
Nov 30 16:20:35 raspberrypi python[382]: File "/usr/lib/python3.5/urllib/request.py", line 582, in http_response
Nov 30 16:20:35 raspberrypi python[382]: 'http', request, response, code, msg, hdrs)
Nov 30 16:20:35 raspberrypi python[382]: File "/usr/lib/python3.5/urllib/request.py", line 510, in error
Nov 30 16:20:35 raspberrypi python[382]: return self._call_chain(*args)
Nov 30 16:20:35 raspberrypi python[382]: File "/usr/lib/python3.5/urllib/request.py", line 444, in _call_chain
Nov 30 16:20:35 raspberrypi python[382]: result = func(*args)
Nov 30 16:20:35 raspberrypi python[382]: File "/usr/lib/python3.5/urllib/request.py", line 590, in http_error_default
Nov 30 16:20:35 raspberrypi python[382]: raise HTTPError(req.full_url, code, msg, hdrs, fp)
Nov 30 16:20:35 raspberrypi python[382]: urllib.error.HTTPError: HTTP Error 503: Service Unavailable

aro28 · 2018-11-30T10:22:53Z

Tasmota light is triggered and than it crashes with above output.

shivasiddharth · 2018-11-30T10:27:35Z

Manually run the assistant and post th terminal output after giving the tasmota command. Service status does not provide full information.

aro28 · 2018-11-30T10:32:52Z

Sure..
ON_MUTED_CHANGED:
{"is_muted": false}
ON_MUTED_CHANGED:
{"is_muted": false}
ON_START_FINISHED
ON_START_FINISHED
INFO:snowboy:Keyword 3 detected at time: 2018-11-30 16:32:10
Assistant is listening....
ON_CONVERSATION_TURN_STARTED

ON_CONVERSATION_TURN_STARTED
ON_END_OF_UTTERANCE
ON_END_OF_UTTERANCE
ON_RECOGNIZING_SPEECH_FINISHED:
{"text": "turn off living light"}
ON_RECOGNIZING_SPEECH_FINISHED:
{"text": "turn off living light"}
ERROR:main:HTTP Error 503: Service Unavailable
Traceback (most recent call last):
File "/home/pi/GassistPi/src/main.py", line 692, in
Myassistant().main()
File "/home/pi/GassistPi/src/main.py", line 482, in main
tasmota_control(str(usrcmd).lower(), name.lower(),tasmota_deviceip[num],tasmota_deviceportid[num])
File "/home/pi/GassistPi/src/main.py", line 145, in tasmota_control
say("Tunring off "+devname)
File "/home/pi/GassistPi/src/actions.py", line 225, in say
newword=trans(words,language)
File "/home/pi/GassistPi/src/actions.py", line 219, in trans
transword= translator.translate(words, lang)
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 409, in translate
return _unwrapper_single_element(self._translate_single_text(text, target_language, source_language))
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 334, in _translate_single_text
results = list(self._execute(make_task(i) for i in split_text(text)))
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 203, in _execute
yield each()
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 332, in
return lambda: self._basic_translate(text, target_language, source_lauguage)[0]
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 251, in _basic_translate
response_content = self._open_url(url)
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 191, in _open_url
raise e
File "/home/pi/env/lib/python3.5/site-packages/goslate.py", line 181, in _open_url
response = self._opener.open(request, timeout=self._TIMEOUT)
File "/usr/lib/python3.5/urllib/request.py", line 472, in open
response = meth(req, response)
File "/usr/lib/python3.5/urllib/request.py", line 582, in http_response
'http', request, response, code, msg, hdrs)
File "/usr/lib/python3.5/urllib/request.py", line 510, in error
return self._call_chain(*args)
File "/usr/lib/python3.5/urllib/request.py", line 444, in _call_chain
result = func(*args)
File "/usr/lib/python3.5/urllib/request.py", line 590, in http_error_default
raise HTTPError(req.full_url, code, msg, hdrs, fp)
urllib.error.HTTPError: HTTP Error 503: Service Unavailable

shivasiddharth · 2018-11-30T10:50:26Z

Run:

source env/bin/activate
pip install git+https://github.com/shivasiddharth/py-googletrans.git --upgrade
pip uninstall goslate

replace your existing actions.py file with the new file from master. These errors should not appear.

aro28 · 2018-11-30T10:57:34Z

Yes. I did and now it works.. Many thanks Shiva!!!

shivasiddharth · 2018-11-30T11:05:11Z

Will fix the hue error over this weekend.

aro28 changed the title ~~GassistPi stopps working after sending wrong light name~~ GassistPi stops working after sending wrong light name Nov 17, 2018

shivasiddharth changed the title ~~GassistPi stops working after sending wrong light name~~ Commands to diyHue does not work Nov 30, 2018

shivasiddharth added the bug label Nov 30, 2018

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Commands to diyHue does not work #632

Commands to diyHue does not work #632

aro28 commented Nov 17, 2018

aro28 commented Nov 17, 2018

shivasiddharth commented Nov 24, 2018

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 28, 2018

shivasiddharth commented Nov 29, 2018

aro28 commented Nov 29, 2018

shivasiddharth commented Nov 29, 2018

shivasiddharth commented Nov 29, 2018

aro28 commented Nov 29, 2018 •

edited

Loading

aro28 commented Nov 29, 2018 •

edited

Loading

aro28 commented Nov 29, 2018

aro28 commented Nov 30, 2018 •

edited

Loading

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

Commands to diyHue does not work #632

Commands to diyHue does not work #632

Comments

aro28 commented Nov 17, 2018

aro28 commented Nov 17, 2018

shivasiddharth commented Nov 24, 2018

aro28 commented Nov 28, 2018 • edited Loading

aro28 commented Nov 28, 2018 • edited Loading

aro28 commented Nov 28, 2018 • edited Loading

aro28 commented Nov 28, 2018

shivasiddharth commented Nov 29, 2018

aro28 commented Nov 29, 2018

shivasiddharth commented Nov 29, 2018

shivasiddharth commented Nov 29, 2018

aro28 commented Nov 29, 2018 • edited Loading

aro28 commented Nov 29, 2018 • edited Loading

aro28 commented Nov 29, 2018

aro28 commented Nov 30, 2018 • edited Loading

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 30, 2018

shivasiddharth commented Nov 30, 2018

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 28, 2018 •

edited

Loading

aro28 commented Nov 29, 2018 •

edited

Loading

aro28 commented Nov 29, 2018 •

edited

Loading

aro28 commented Nov 30, 2018 •

edited

Loading