Bug? LED activation value 0 not allowed

[eurorackworld]

HI,

When playing around with the LEDs I noticed the following; the LEDs can respond on a value for example that is set by an analog control. So if you turn the control around the LED will turn on when the activation value is reached. But the analog controls go from 0-127 while the LED is going from 1-127 and doesn't allow a 0. See screenshot.

This way the LED cannot turn on when you reach 0 with your analog control. For me a 1 is a bit of useless, and a 0 would be very nice. Could that be changed or am I missing something?

[paradajz]

Not a bug, that's how it works at the moment.

[paradajz]

Pushed.
Firmware: 34f151d
UI: shanteacontrols/OpenDeckUI@8b0e46d

[eurorackworld]

Could it be that now it is allowed to enter a 0 but not saving it..?

If I enter a 0 and switch to another led or screen and back to the original led the value is back to the previous one.

[eurorackworld]

p.s. there is a very good use for value 0, the elektron boxes send values 0 and 1 for mute and unmute. Currently the led of the midi controller using value 1 will work exactly the order way then the elektron boxes do. For example the digitakt is sending a 0 when the led needs to be on;

[paradajz]

Cannot reproduce. Which firmware? Which board?

[eurorackworld]

argh crap. Firmware 7.4.x , was an older controller I was testing with. The newer one works fine. Sorry..