diff --git a/README.md b/README.md
index e7f28a3..a1f8aa0 100644
--- a/README.md
+++ b/README.md
@@ -99,7 +99,7 @@ All these ports must be exposed to the internet if you need access over the inte
 <details markdown>
   <summary>Open Section</summary>
 
-The Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and add `--network=host` to the above `docker run` command, or `network_mode: 'host'` in `docker-compose.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers, you must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host.
+The Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and add `--network=host` to the above `docker run` command, or `network_mode: 'host'` in `docker-compose.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers, you must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host. Access the container using the specified `NGINX_PORT`.
 
 However, host networking may be restricted or not be desired because of security reasons or when deploying multiple desktop containers in one host. If not available, check if the container starts working after omitting `--network=host`.
 
@@ -170,7 +170,7 @@ All these ports must be exposed to the internet if you need access over the inte
 <details markdown>
   <summary>Open Section</summary>
 
-Otherwise, the Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and uncomment `hostNetwork: true` in `egl.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers with `hostNetwork: true`, you must also pass new environment variables such as `DISPLAY=:22`, `NGINX_PORT=8082`, `SELKIES_PORT=8083`, and `SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host.
+Otherwise, the Selkies-GStreamer WebRTC HTML5 interface will likely just start working if you open UDP and TCP ports 49152–65535 in your host server network and uncomment `hostNetwork: true` in `egl.yml`. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. When deploying multiple containers with `hostNetwork: true`, you must also pass new environment variables such as `DISPLAY=:22`, `NGINX_PORT=8082`, `SELKIES_PORT=8083`, and `SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host. Access the container using the specified `NGINX_PORT`.
 
 However, host networking may be restricted or not be desired because of security reasons or when deploying multiple desktop containers in one host. If not available, check if the container starts working after commenting out `hostNetwork: true`.
 
@@ -193,7 +193,7 @@ In most cases when either of your server or client has a permissive firewall, th
 
 **Read the last steps of each Docker/Kubernetes instruction to use an internal TURN server. Alternatively, read the below sections.**
 
-For an easy fix to when the signaling connection works, but the WebRTC connection fails, **open UDP and TCP ports 49152–65535 in your host server network** (or use Full Cone NAT in your network router/infrastructure settings), then add the option `--network=host` to your Docker command (or `network_mode: 'host'` in `docker-compose.yml`), or uncomment `hostNetwork: true` in your `egl.yml` file when using Kubernetes (note that your cluster may have not allowed this, resulting in an error). This exposes your container to the host network, which disables network isolation. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. You must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host.
+For an easy fix to when the signaling connection works, but the WebRTC connection fails, **open UDP and TCP ports 49152–65535 in your host server network** (or use Full Cone NAT in your network router/infrastructure settings), then add the option `--network=host` to your Docker command (or `network_mode: 'host'` in `docker-compose.yml`), or uncomment `hostNetwork: true` in your `egl.yml` file when using Kubernetes (note that your cluster may have not allowed this, resulting in an error). This exposes your container to the host network, which disables network isolation. Note that running multiple desktop containers in one host under this configuration may be problematic and is not recommended. You must also pass new environment variables such as `-e DISPLAY=:22`, `-e NGINX_PORT=8082`, `-e SELKIES_PORT=8083`, and `-e SELKIES_METRICS_HTTP_PORT=9083` into the container, all not overlapping with any other X11 server or container in the same host. Access the container using the specified `NGINX_PORT`.
 
 If this does not fix the connection issue (normally when the host is behind another additional firewall), you cannot use this fix for security or technical reasons, or when deploying multiple desktop containers in one host, read the below text to set up an external [TURN server](https://github.com/selkies-project/selkies-gstreamer/blob/main/docs/firewall.md#turn-server).
 
diff --git a/kasmvnc-entrypoint.sh b/kasmvnc-entrypoint.sh
index 5a20d21..2b641bb 100755
--- a/kasmvnc-entrypoint.sh
+++ b/kasmvnc-entrypoint.sh
@@ -32,7 +32,7 @@ yq -i "
 .encoding.rect_encoding_mode.rectangle_compress_threads = ${KASMVNC_THREADS-0} |
 .encoding.max_frame_rate = ${DISPLAY_REFRESH} |
 .network.interface = \"127.0.0.1\" |
-.network.websocket_port = 8081 |
+.network.websocket_port = ${SELKIES_PORT:-8081} |
 .network.ssl.require_ssl = $(echo ${SELKIES_ENABLE_HTTPS-false} | tr '[:upper:]' '[:lower:]') |
 .network.udp.public_ip = \"$(dig -4 TXT +short @ns1.google.com o-o.myaddr.l.google.com 2>/dev/null | { read output; if [ -z "$output" ] || echo "$output" | grep -q '^;;'; then exit 1; else echo "$(echo $output | sed 's,\",,g')"; fi } || dig -6 TXT +short @ns1.google.com o-o.myaddr.l.google.com 2>/dev/null | { read output; if [ -z "$output" ] || echo "$output" | grep -q '^;;'; then exit 1; else echo "[$(echo $output | sed 's,\",,g')]"; fi } || hostname -I 2>/dev/null | awk '{print $1; exit}' || echo '127.0.0.1')\"
 " ~/.vnc/kasmvnc.yaml
@@ -51,8 +51,8 @@ echo "# Selkies KasmVNC NGINX Configuration
 server {
     access_log /dev/stdout;
     error_log /dev/stderr;
-    listen 8080 $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
-    listen [::]:8080 $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
+    listen ${NGINX_PORT:-8080} $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
+    listen [::]:${NGINX_PORT:-8080} $(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "ssl"; fi);
     ssl_certificate ${SELKIES_HTTPS_CERT-/etc/ssl/certs/ssl-cert-snakeoil.pem};
     ssl_certificate_key ${SELKIES_HTTPS_KEY-/etc/ssl/private/ssl-cert-snakeoil.key};
     $(if [ \"$(echo ${SELKIES_ENABLE_BASIC_AUTH} | tr '[:upper:]' '[:lower:]')\" != \"false\" ]; then echo "auth_basic \"Selkies\";"; echo -n "    auth_basic_user_file ${XDG_RUNTIME_DIR}/.htpasswd;"; fi)
@@ -74,13 +74,13 @@ server {
 
         client_max_body_size    10M;
 
-        proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:8081;
+        proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_PORT:-8081};
     }
 }" | tee /etc/nginx/sites-available/default > /dev/null
 
 # Run KasmVNC
 if ls ~/.vnc/*\:"${KASMVNC_DISPLAY#*:}".pid >/dev/null 2>&1; then kasmvncserver -kill "${KASMVNC_DISPLAY}"; fi
-kasmvncserver "${KASMVNC_DISPLAY}" -geometry "${DISPLAY_SIZEW}x${DISPLAY_SIZEH}" -depth "${DISPLAY_CDEPTH}" -noxstartup -FrameRate "${DISPLAY_REFRESH}" -RectThreads "${KASMVNC_THREADS}" -interface 127.0.0.1 -rfbport 9082 -websocketPort 8081 -disableBasicAuth -AlwaysShared -BlacklistTimeout 0 ${KASMVNC_FLAG}
+kasmvncserver "${KASMVNC_DISPLAY}" -geometry "${DISPLAY_SIZEW}x${DISPLAY_SIZEH}" -depth "${DISPLAY_CDEPTH}" -noxstartup -FrameRate "${DISPLAY_REFRESH}" -RectThreads "${KASMVNC_THREADS}" -interface 127.0.0.1 -websocketPort "${SELKIES_PORT:-8081}" -disableBasicAuth -AlwaysShared -BlacklistTimeout 0 ${KASMVNC_FLAG}
 
 until [ -S "/tmp/.X11-unix/X${KASMVNC_DISPLAY#*:}" ]; do sleep 0.5; done;
 
diff --git a/selkies-gstreamer-entrypoint.sh b/selkies-gstreamer-entrypoint.sh
index e944a54..5130507 100755
--- a/selkies-gstreamer-entrypoint.sh
+++ b/selkies-gstreamer-entrypoint.sh
@@ -138,7 +138,7 @@ server {
 
         client_max_body_size    10M;
 
-        proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:9081;
+        proxy_pass http$(if [ \"$(echo ${SELKIES_ENABLE_HTTPS} | tr '[:upper:]' '[:lower:]')\" = \"true\" ]; then echo -n "s"; fi)://localhost:${SELKIES_METRICS_HTTP_PORT:-9081};
     }
 
     error_page 500 502 503 504 /50x.html;
diff --git a/supervisord.conf b/supervisord.conf
index 96dbd6c..f0d6f5d 100644
--- a/supervisord.conf
+++ b/supervisord.conf
@@ -74,7 +74,7 @@ autorestart=true
 priority=20
 
 [program:nginx]
-command=bash -c "until nc -z localhost 8081; do sleep 0.5; done; /usr/sbin/nginx -g \"daemon off;\""
+command=bash -c "until nc -z localhost ${SELKIES_PORT:-8081}; do sleep 0.5; done; /usr/sbin/nginx -g \"daemon off;\""
 stdout_logfile=/tmp/nginx.log
 stdout_logfile_maxbytes=5MB
 stdout_logfile_backups=0