You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When I run the code of chapter 08 according to the tutorial step by step, I run the make jtagboot successfully but when I run the make openocd to get an error like the following.
Launching OpenOCD
Open On-Chip Debugger 0.11.0+dev-g1ad6ed3 (2021-12-02-20:10)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Warn : DEPRECATED! use '-baseaddr' not '-ctibase'
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway...
Error: rpi4.tap: IR capture error; saw 0x0f not 0x01
Warn : Bypassing JTAG setup events due to errors
Error: Invalid ACK (7) in DAP response
Error: JTAG-DP STICKY ERROR
make: *** [Makefile:245: openocd] Error 1
I search the web for the reasons and solutions but I get nothing, and I am sure that I connect the GPIO pins and ARM-USB-TINY-H correctly. So does anyone have the same problem or give me some tips?
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
When I run the code of chapter 08 according to the tutorial step by step, I run the
make jtagboot
successfully but when I run themake openocd
to get an error like the following.I search the web for the reasons and solutions but I get nothing, and I am sure that I connect the GPIO pins and ARM-USB-TINY-H correctly. So does anyone have the same problem or give me some tips?
Beta Was this translation helpful? Give feedback.
All reactions