Skip to content

Latest commit

 

History

History
1331 lines (980 loc) · 46.1 KB

roc-for-elm-programmers.md

File metadata and controls

1331 lines (980 loc) · 46.1 KB

Roc for Elm programmers

Roc is a direct descendant of the Elm programming language. The two languages are similar, but not the same!

This is a guide to help Elm programmers learn what's different between Elm and Roc.

NOTE: Almost all that's in this document has been implemented - but not quite all of it!

Comments

Like Python, Ruby, Perl, and Elixir, inline comments in Roc begin with # instead of --.

Doc comments begin with ## instead.

Like Python, Roc does not have multiline comment syntax.

Casing

Like Elm, Roc uses camelCase for identifiers. Modules and types begin with a capital letter (eg. Decode), variables (including type variables!) begin with a lower case letter (eg. request). Acronyms also use camelCase despite being capitalized in English, eg. xmlHttpRequest for a variable and XmlHttpRequest for a type. Each word starts with a capital letter, so if acronyms are only capitals it's harder to see where the words start. eg. XMLHTTPRequest is less clear than XmlHttpRequest, unless you already know the acronyms.

String Interpolation

Roc strings work like Elm strings except that they support string interpolation. Here's a Roc string which uses interpolation:

"Hi, my name is $(name)!"

The Elm equivalent would be:

"Hi, my name is " ++ name ++ "!"

Any expression of string type can go inside the parentheses, as long as it is contained in a single line of code.

Roc strings also have the type Str rather than Elm's String. This is to make common qualified operations like Str.join more concise; the idea is that you'll use the abbreviation often enough that you'll quickly get used to it. (I got used to str in Rust very quickly.)

Type Aliases

Rather than a type alias keyword, in Roc you define type aliases with : like so:

Username : Str

You can also define type aliases anywhere, not just at the top level. Their scoping rules work as normal.

Separately, Roc also allows standalone type annotations with no corresponding implementation. So I can write this as an annotation with no implementation:

getUsername : User -> Username

Roc will automatically fill in the implementation of this as the equivalent of a Debug.todo. If it ever gets run, it will crash, but for debugging purposes or sketching out APIs, you don't need to bother writing getUsername = Debug.todo "implement".

let syntax

Imagine if Elm's let...in worked exactly the same way, except you removed the let and in keywords. That's how it works in Roc.

For example, consider this Elm code:

numbers =
    let
        num1 =
            123

        num2 =
            456
    in
    [num1, num2]

Here's the equivalent Roc code:

numbers =
    num1 =
        123

    num2 =
        456

    [num1, num2]

Like let...in in Elm, this is indentation-sensitive. Each of the definitions ("defs" for short) must have the same indentation as the ending expression.

Roc has a built-in formatter that has a lot in common with elm-format (e.g. no configuration, no enforced line length) but also some stylistic differences. One notable difference is that it doesn't use as much spacing. For example, if you ran roc format on the following Roc code, the formatter would not change it:

numbers =
    num1 = 123
    num2 = 456

    [num1, num2]

Function definitions

Roc only has one syntax for defining functions, and it looks almost exactly like Elm's anonymous functions. The one difference is that multiple arguments are separated by commas.

So where in Elm you might write foo a b = in Roc you'd write foo = \a, b -> instead.

One minor benefit of the comma is that you don't need to use parentheses to destructure arguments inline. For example, in Elm, you always need to use parens to destructure variants inline in function declarations, like in these two examples:

\(UserId id1) (UserId id2) ->
\(UserId id) ->

Without the parentheses, it wouldn't be clear where one argument ended and the next one began.

In Roc, the commas make argument boundaries unambiguous, so no parens are needed. You can write the above like so in Roc:

\UserId id1, UserId id2 ->
\UserId id ->

Unbound type variables

In Elm, every type variable is named. For example:

List.reverse : List a -> List a

[] : List a

The a in List.reverse is a bound type variable, because it appears more than once in the type. Whatever the first list's a is, that's what the second list's a must be as well.

The a in [] : List a is an unbound type variable. It has no restrictions, which is why [] can be passed to any function that expects a List.

In Roc, this distinction between bound and unbound type variables is reflected at the syntax level. Here are those types in Roc:

List.reverse : List a -> List a

[] : List *

The * is the "wildcard" type variable. It is only for unbound type variables like this. Like the wildcard * in path globs like *.txt, it matches anything.

You can still choose names for unbound type variables if you like, but the compiler will infer them as * by default.

In Elm, the type of always is a -> (b -> a). The equivalent Roc type would be:

always : a -> (* -> a)

This makes unbound type variables easier to talk about out loud. Rather than saying (for example) "List a" or "Html msg with a lowercase m" you can say "List star" or "Html star".

Record Syntax

Roc uses Rust/JavaScript syntax for record literals, e.g. { x: 1, y: 2 }.

It also allows omitting the value; { x, y } is sugar for { x: x, y: y }.

You can pattern match on exact record values, e.g. { x: 5 } ->.

Roc does not have the "a type alias for a record creates a convenience constructor function" feature that Elm has. However, it does allow trailing commas, in both values and type annotations. Roc's formatter (which is built into the compiler, and which is zero-configuration like elm-format) formats multi-line record literals (and record types) with a comma at the end of each line, like so:

user = {
    firstName: "Sam",
    lastName: "Sample",
    email: "[email protected]",
}

This is easy to read and leads to tidy version control diffs; no matter how you reorder these fields, or add or remove fields, the diffs will only be of the relevant fields in question, not any adjacent fields or tokens.

Lists are formatted similarly to records, except of course they don't have labeled fields.

Closed record annotations look the same as they do in Elm, e.g. { name : Str, email : Str }. Open record annotations look a bit different.

In Elm:

{ a | name : Str, email : Str } -> Str

In Roc:

{ name : Str, email : Str }* -> Str

Here, the open record's type variable appears immediately after the }.

In the Elm example, the a is unbound, which in Roc means it appears as *.

This syntax makes it easier to write a function that accepts an open record with an unbound type variable (e.g. "this record, plus other fields if you like"). This is a totally reasonable thing to do - as often as you like! It has multiple upsides: it makes "named arguments" work with data model records more often, and makes it easier to change functions in backwards-compatible ways. It has no major downsides.

The syntax encourages doing this. "Just add a star" like so:

{ name : Str, email : Str }* -> Str

You can also use bound type variables too. In Elm:

{ a | name : Str, email : Str } -> { a | name : Str, email : Str }

In Roc:

{ name : Str, email : Str }a -> { name : Str, email : Str }a

Like in Elm, using records with bound variables should be extremely rare. They need to exist for the type system to work, and they aren't useless, but any time you find yourself reaching for them, there is a very high chance that there's a better way to write that code!

Record Update

Elm has "record update" syntax like this:

{ user | firstName = "Sam", lastName = "Sample" }

Roc has the same feature, but its syntax looks like this:

{ user & firstName: "Sam", lastName: "Sample" }

The record before the & can be qualified, like so:

{ Foo.defaultConfig & timeZone: utc }

However, it cannot involve record field access. So this would not compile:

{ Foo.defaults.config & timeZone: utc }

Optional Record Fields

There's a pattern in Elm where you pass a function a record of configuration values, some of which you don't really care about and want to leave as defaults. To incorporate the default config options, you call the function like so:

table { defaultConfig | height = 800, width = 600 }

This way, as the caller I'm specifying only the height and width fields, and leaving the others to whatever is inside defaultConfig. Perhaps it also has the fields title and description.

In Roc, you can do this like so:

table { height: 800, width: 600 }

...and the table function will fill in its default values for title and description. There is no need to use a defaultConfig record.

Here's how that table function would be implemented in Roc:

table = \{ height, width, title ? "", description ? "" } ->

This is using default value field destructuring to destructure a record while providing default values for any fields that might be missing. Here's the type of table:

table :
    {
        height : Pixels,
        width : Pixels,
        title ? Str,
        description ? Str,
    }
    -> Table
table = \{ height, width, title ? "", description ? "" } ->

This says that table takes a record with two fields that are required, height and width, and two fields that may be omitted, title and description. It also says that the height and width fields have the type Pixels, a type alias for some numeric type, and the title and description fields have the type Str. This means you can choose to omit the title, description, or both fields, when calling the function... but if you provide them, they must have the type Str.

This is also the type that would have been inferred for table if no annotation had been written. Roc's compiler can tell from the destructuring syntax title ? "" that title is a default value field, and that it has the type Str.

Destructuring is the only way to implement a record with default value fields. For example, if you write the expression config.title and title is a default value field, you'll get a compile error.

Default values is a concept that exists only in record fields, and it's intended for the use case of config records like this. The ergonomics of destructuring mean this wouldn't be a good fit for data modeling, consider using a custom tag union or the Result type instead.

Pattern matching

Roc's pattern matching conditionals work about the same as how they do in Elm. Here are two differences:

  • Roc uses the syntax when...is instead of case...of
  • In Roc, you can use | to handle multiple patterns in the same way

For example:

when color is
    Blue -> 1
    Green | Red | Yellow -> 2
    Purple -> 3

Like Rust, you can add an if guard after a pattern:

when color is
    Blue -> 1
    Green | Red | Yellow if totalColors >= 3 -> 2
    Green | Red | Yellow -> 4 # only gets run if totalColors < 3

This gives you a way to use constants in patterns:

pi = 3.14
e = 2.72

when number is
    0 -> "zero"
    1 -> "one"
    v if v == pi -> "pi"
    v if v == e -> "e"
    _ -> ""

Booleans

Roc has a Bool module (with operations like Bool.and and Bool.or; Roc does not have a Basics module), and Bool is an opaque type. The values Bool.true and Bool.false work like True and False do in Elm.

Custom Types

This is the biggest semantic difference between Roc and Elm.

Let's start with the motivation. Suppose I'm using a platform for making a web server, and I want to:

  • Read some data from a file
  • Send an HTTP request containing some of the data from the file
  • Write some data to a file containing some of the data from the HTTP response

Assuming I'm writing this on a Roc platform which has a Task-based API, and that Task.await is like Elm's Task.andThen but with the arguments flipped, here's one way I might write this:

doStuff = \filename ->
    Task.await (File.read filename) \fileData ->
        Task.await (Http.get (urlFromData fileData)) \response ->
            File.write filename (responseToData response)

Note that in Elm you'd need to add a <| before the anonymous functions (e.g. <| \response ->) but in Roc you don't.

What would the type of the above expression be? Let's say these function calls have the following types:

File.read : Filename -> Task File.Data File.ReadErr
File.write : Filename, File.Data -> Task File.Data File.WriteErr
Http.get : Url -> Task Http.Response Http.Err

Task.await : Task a err, (a -> Task b err) -> Task b err

If these are the types, the result would be a type mismatch. Those Task values have incompatible error types, so await won't be able to chain them together.

This situation is one of the motivations behind Roc's tags feature. Using tags, not only will this type-check, but at the end we get a combined error type which has the union of all the possible errors that could have occurred in this sequence. We can then handle those errors using a single when, like so:

when error is
    # Http.Err possibilities
    PageNotFound -> ...
    Timeout -> ...
    BadPayload -> ...

    # File.ReadErr possibilities
    FileNotFound -> ...
    ReadAccessDenied -> ...
    FileCorrupted -> ...

    # File.WriteErr possibilities
    DirectoryNotFound -> ...
    WriteAccessDenied -> ...
    DiskFull -> ...

Here is the set of slightly different types that will make the original chained expression compile. (await is unchanged.)

File.read : Filename -> Task File.Data (File.ReadErr *)
File.write : Filename, File.Data -> Task File.Data (File.WriteErr *)
Http.get : Url -> Task Http.Response (Http.Err *)

await : Task a err, (a -> Task b err) -> Task b err

The key is that each of the error types is a type alias for a Roc tag union. Here's how those look:

Http.Err a : [
    PageNotFound,
    Timeout,
    BadPayload Str,
]a

File.ReadErr a : [
    FileNotFound,
    Corrupted,
    BadFormat,
]a

File.WriteErr a : [
    FileNotFound,
    DiskFull,
]a

For a side-by-side comparison, here's how we would implement something similar in Elm:

type Http.Err
    = PageNotFound
    | Timeout
    | BadPayload String

type File.ReadErr
    = FileNotFound
    | Corrupted
    | BadFormat

type File.WriteErr
    = FileNotFound
    | DiskFull

There are a few differences between them, but the most significant one here is that the Roc version has a type variable.

That type variable has a similar purpose to the type variable in Elm's open records (e.g. the a in { a | name : String, email : String } which in Roc would be { name : Str, email : Str }a) - except applied to sum types (such as Elm's custom types) instead of product types (such as records).

If you were to remove the type variables from the Roc declarations for Http.Err, File.ReadErr, and File.WriteErr, they would work practically the same way as the Elm one. Roc tag unions can be used as traditional algebraic data types, and they have the usual support for pattern matching, exhaustiveness checking, and so on.

You don't need to declare tag unions before using them. Instead, you can just write a tag (essentially a variant) anywhere you like, and Roc will infer the type of the union it goes in.

Here are some examples of using tags in a REPL:

> Red
Red : [Red]*

> Blue
Blue : [Blue]*

> Ok "hi"
Ok "hi" : [Ok Str]*

> SomethingIJustMadeUp "hi" "there"
SomethingIJustMadeUp "hi" "there" : [SomethingIJustMadeUp Str Str]*

> x = Foo
Foo : [Foo]*

> y = Foo "hi" Bar
Foo "hi" Bar : [Foo Str [Bar]*]*

> z = Foo ["str1", "str2"]
Foo ["str1", "str2"] : [Foo (List Str)]*

The [ ]s in the types are tag unions, and they list all the possible different tags that the value could be at runtime. In all of these tag unions, there is only one tag. Notice the * at the end; that's the type variable we saw earlier.

Similarly to how if you put { name = "" } into elm repl, it will infer a type of { a | name : String } - that is, an open record with an unbound type variable and name : Str field - if you put a tag Foo "" into roc repl, it will infer a type of [Foo Str]* - that is, an open tag union with one alternative: a Foo tag with a Str payload.

The same tag can be used with different arities and types. In the REPL above, x, y, and z, can all coexist even though they use Foo with different arities - and also with different types within the same arity.

Similarly, you can pattern match on tags without declaring any types, and Roc will infer the type of the tag union being matched.

For example, suppose we don't write any type annotations anywhere, and have this pattern match:

when blah is
    MyStr str -> Str.concat str "!"
    MyBool bool -> Bool.not bool

The inferred type of this expression would be [MyStr Str, MyBool Bool].

Exhaustiveness checking is still in full effect here. It's based on usage; if any code pathways led to blah being set to the tag Foo, I'd get an exhaustiveness error because this when does not have a Foo branch.

There's an important interaction here between the inferred type of a when-expression and the inferred type of a tag value. Note which types have a * and which do not.

x : [Foo]*
x = Foo

y : [Bar Str]*
y = Bar "stuff"

tagToStr : [Foo, Bar Str] -> Str
tagToStr = \tag ->
    when tag is
        Foo -> "hi"
        Bar str -> Str.concat str "!"

Each of these type annotations involves a tag union - a collection of tags bracketed by [ and ].

  • The type [Foo, Bar Str] is a closed tag union.
  • The type [Foo]* is an open tag union.

You can pass x to tagToStr because an open tag union is type-compatible with any closed tag union which contains its tags (in this case, the Foo tag). You can also pass y to tagToStr for the same reason.

In general, when you make a tag value, you'll get an open tag union (with a *). Using when can get you a closed union (a union without a *) but that's not always what happens. Here's a when in which the inferred type is an open tag union:

alwaysFoo : [Foo Str]* -> [Foo Str]*
alwaysFoo = \tag ->
    when tag is
        Foo str -> Foo (Str.concat str "!")
        _ -> Foo ""

The return value is an open tag union because all branches return something tagged with Foo.

The argument is also an open tag union, because this when-expression has a default branch; that argument is compatible with any tag union. This means you can pass the function some totally nonsensical tag, and it will still compile.

Note that the argument does not have the type *. That's because you cannot pass it values of any type; you can only pass it tags!

You could, if you wanted, change the argument's annotation to be []* and it would compile. After all, its default branch means it will accept any tag!

Still, the compiler will infer [Foo Str]* based on usage.

Just because [Foo Str]* is the inferred type of this argument, doesn't mean you have to accept that much flexibility. You can restrict it by removing the *. For example, if you changed the annotation to this...

alwaysFoo : [Foo Str, Bar Bool] -> [Foo Str]*

...then the function would only accept tags like Foo "hi" and Bar (x == y). By writing out your own annotations, you can get the same level of restriction you get with traditional algebraic data types (which, after all, come with the requirement that you write out their annotations). Using annotations, you can restrict even when-expressions with default branches to accept only the values you define to be valid.

In fact, if you want a traditional algebraic data type in Roc, you can get about the same functionality by making (and then using) a type alias for a closed tag union. Here's exactly how Result is defined using tags in Roc's standard library:

Result ok err : [Ok ok, Err err]

You can also use tags to define recursive data structures, because recursive type aliases are allowed as long as the recursion happens within a tag. For example:

LinkedList a : [Nil, Cons a (LinkedList a)]

Inferred recursive tags use the as keyword. For example, the inferred version of the above type alias would be:

[Nil, Cons a b] as b

The * in open tag unions is actually an unbound ("wildcard") type variable. It can be bound too, with a lowercase letter like any other bound type variable. Here's an example:

exclaimFoo : [Foo Str]a -> [Foo Str]a
exclaimFoo = \tag ->
    when tag is
        Foo str -> Foo (Str.concat str "!")
        other -> other

The * says "this union can also include any other tags", and here the a says "the return value union includes Foo Str, plus whichever other tags the argument includes in its union."

The Roc type [] is equivalent to Elm's Never. You can never satisfy it!

Opaque Types

In Elm, you can choose to expose (or not) custom types' constructors in order to create opaque types. Since Roc's tags can be constructed in any module without importing anything, Roc has a separate opaque type language feature to enable information hiding.

As an example, suppose I define these inside the Username module:

Username := Str

fromStr : Str -> Username
fromStr = \str ->
    @Username str

toStr : Username -> Str
toStr = \@Username str ->
    str

Here, Username is an opaque type. The fromStr function turns a string into a Username by "calling" @Username on that string. The toStr function turns a Username back into a string by pattern matching @Username str -> to unwrap the string from the Username.

Now that I've defined the Username opaque type, I can expose it so that other modules can use it in type annotations. However, other modules can't use the @Username syntax to wrap or unwrap Username values. That operation is only available in the same scope where Username itself was defined; trying to use it outside that scope will give an error.

If I were to define Username := Str inside another module (e.g. Main) and use @Username, it would compile, but that Username opaque type would not be considered equal to the one defined in the Username module. Although both opaque types have the name Username, they were defined in different modules. That means the two Username types would be type-incompatible with each other, and even attempting to use == to compare them would be a type mismatch.

Modules and Shadowing

In Elm, my main module (where main lives) might begin like this:

module MyApp exposing (main)

import Parser
import Http exposing (Request)
import Task exposing (Task, await)

Roc application modules (where the equivalent of main lives) begin with the app keyword rather than the module keyword, and the import syntax is a bit different. Here's how the above module header imports section would look in Roc:

app imports [Parser, Http.{ Request }, Task.{ Task, await }]

app modules are application entry points, and they don't formally expose anything. They also don't have names, so other modules can't even import them!

Modules that can be imported are interface modules. Their headers look like this:

interface Parser
    exposes [Parser, map, oneOf, parse]
    imports [Utf8]

The name interface is intended to draw attention to the fact that the interface these expose is very important.

All imports and exports in Roc are enumerated explicitly; there is no .. syntax.

Since tags are available in all modules, Roc does not have a notion of "importing variants", and there's also no exposing (Foo(..)) equivalent.

Like Elm, Roc does not allow shadowing.

Elm does permit overriding open imports - e.g. if you have import Foo exposing (bar), or import Foo exposing (..), you can still define bar = ... in the module. Roc treats this as shadowing and does not allow it.

Operators

In Elm, operators are functions. In Roc, all operators are syntax sugar.

This means, for example, that you cannot write (/) in Roc; that would be a syntax error. However, the / operator in Roc is infix syntax sugar for Num.div, which is a normal function you can pass to anything you like.

Elm has one unary operator, namely -. (In Elm, -x means "apply unary negate to x.") Roc has that one too, and also unary !. The expression !foo desugars to Bool.not foo, and !foo bar desugars to Bool.not (foo bar).

This was introduced because Roc does not expose any functions globally by default (the way Elm does with Basics functions like not, round, etc.). In Roc, only operators and standard types (like Str and Bool) are exposed globally. Having to fully qualify not was annoying, and making an exception just for not seemed less appealing than making an operator for it, especially when unary ! is so widely used in other languages.

Because Roc has unary !, its "not equal to" operator is != instead of Elm's /=, for symmetry with unary !.

There's an Operator Desugaring Table at the end of this guide, so you can see exactly what each Roc operator desugars to.

Currying and |>

Roc functions aren't curried. Calling (List.append foo) is a type mismatch because List.append takes 2 arguments, not 1.

For this reason, function type annotations separate arguments with , instead of ->. In Roc, the type of List.map is:

List.map : List a, (a -> b) -> List b

You might notice that Roc's List.map takes its arguments in the reverse order from how they are in Elm; the List is the first argument in Roc, whereas it would be the last argument in Elm. This is because Roc's |> operator works like Elixir's rather than like Elm's; here is an example of what it does in Roc:

a b c
    |> f x y

# f (a b c) x y

In Roc, the |> operator inserts the previous expression as the first argument to the subsequent expression, rather than as the last argument as it does in Elm.

This makes a number of operations more useful in pipelines. For example, in Roc, |> Num.div 2.0 divides by 2:

2000
  |> Num.div 2.0

# 1000.0

In Elm, where |> inserts 2 as the last argument, 2 ends up being the numerator rather than the denominator:

2000
  |> (/) 2.0

# 0.001

Another example is List.append, which is called List.concat in Roc:

[1, 2]
  |> List.concat [3, 4]

# [1, 2, 3, 4]

In Elm:

[1, 2]
  |> List.append [3, 4]

# [3, 4, 1, 2]

There are various trade-offs here, of course. Elm's |> has a very elegant implementation, and (|>) in Elm can be usefully passed to other functions (e.g. fold) whereas in Roc it's not even possible to express the type of |>.

As a consequence of |> working differently, "pipe-friendly" argument ordering is also different. That's why List.map has a "flipped" signature in Roc; otherwise, |> List.map Num.abs wouldn't work on a list of numbers. Here's the type of Roc's List.map again, and also a pipeline using it:

List.map : List a, (a -> b) -> List b

[-1, 2, 3, -4]
    |> List.map Num.abs

Roc has no << or >> operators, and there are no functions in the standard library for general-purpose pointfree function composition.

The <| operator

Roc has no <| operator. (It does have |> though.)

In Elm, <| is used as a minor convenience for when you want to avoid some parens in a single-line expression (e.g. foo <| bar baz over foo (bar baz)) and as a major convenience when you want to pass an anonymous function, if, or case as an argument.

For example, elm-test relies on it:

test "it works" <|
    \_ -> verify stuff

In Roc, this does not require a <|. This Roc code does the same thing as the preceding Elm code:

test "it works"
    \_ -> verify stuff

This is convenient with higher-order functions which take a function as their final argument. Since many Roc functions have the same type as Elm functions except with their arguments flipped, this means it's possible to end a lot of expressions with anonymous functions - e.g.

modifiedNums =
    List.map nums \num ->
        doubled = num * 2
        modified = modify doubled

        modified / 2

Separately, you don't need parens or an operator to pass when or if as arguments. Here's another example:

foo 1 2 if something then 3 else 4

# Same as `foo 1 2 (if something then 3 else 4)`

CoffeeScript also does this the way Roc does.

Backpassing

Note: the backpassing syntax will likely be removed from the language. The ! suffix can instead be used for Task.await and the ? suffix is planned for use with Result.try.

Suppose I'm using a platform for making a CLI, and I want to run several Tasks in a row which read some files from the disk. Here's one way I could do that, assuming Task.await is like Elm's Task.andThen with arguments flipped:

readLicense : Filename -> Task License File.ReadErr
readLicense = \filename ->
    Task.await (File.readUtf8 settingsFilename) \settingsYaml ->
        when Yaml.decode settingsDecoder settingsYaml is
            Ok settings ->
                Task.await (File.readUtf8 settings.projectFilename) \csv ->
                    when Csv.decode projectDecoder csv is
                        Ok project ->
                            Task.await (File.readUf8 project.licenseFilename) \licenseStr ->
                                when License.fromStr licenseStr is
                                    Ok license -> Task.succeed license
                                    Err err -> Task.fail (InvalidFormat err)

                        Err err -> Task.fail (InvalidFormat err)

            Err err ->
                Task.fail (InvalidFormat err)

We can write this with |> instead of when like so:

readLicense : Filename -> Task License File.ReadErr
readLicense = \filename ->
    Task.await (File.readUtf8 settingsFilename) \settingsYaml ->
        settingsYaml
            |> Yaml.decode settingsDecoder
            |> Task.fromResult
            |> Task.mapFail InvalidFormat
            |> Task.await \settings ->
                Task.await (File.readUtf8 settings.projectFilename) \projectCsv ->
                    projectCsv
                        |> Csv.decode projectDecoder
                        |> Task.fromResult
                        |> Task.mapFail InvalidFormat
                        |> Task.await \project ->
                            Task.await (File.readUf8 project.licenseFilename) \licenseStr ->
                                License.fromStr licenseStr
                                    |> Task.fromResult
                                    |> Task.mapFail InvalidFormat

We can also write it this way, which is equivalent to the previous two ways:

readLicense : Filename -> Task License File.ReadErr
readLicense = \filename ->
    settingsYaml <- Task.await (File.readUtf8 settingsFilename)

    settings <-
        settingsYaml
            |> Yaml.decode settingsDecoder
            |> Task.fromResult
            |> Task.mapFail InvalidFormat

    projectCsv <- Task.await (File.readUtf8 settings.projectFilename)

    project <-
        projectCsv
            |> Csv.decode projectDecoder
            |> Task.fromResult
            |> Task.mapFail InvalidFormat

    licenseStr <-
        Task.await (File.readUf8 project.licenseFilename)

    License.fromStr licenseStr
        |> Task.fromResult
        |> Task.mapFail InvalidFormat

This uses backpassing syntax to nest anonymous functions without indenting them. Here's a smaller demonstration of backpassing; the second snippet is sugar for the first.

list =
    List.map numbers \num -> num + 1
list =
    num <- List.map numbers

    num + 1

Both snippets are calling List.map passing numbers as the first argument, and a \num -> num + 1 function for the other argument.

The difference is that in the second snippet, the \num -> num + 1 function is written backwards, like this:

    num <-

    num + 1

This is called backpassing because you write the function backwards and then immediately pass it as an argument to another function.

The other function - the one you're passing this one to - goes right after the <- symbol. That function should be called with one argument missing at the end, such as with List.map numbers (which is missing its final argument).

Here's another pair of snippets, this time using two backpassing calls:

incrementedNumbers =
    List.map lists \numbers ->
        List.map numbers \num -> num + 1
incrementedNumbers =
    numbers <- List.map lists
    num <- List.map numbers

    num + 1

In the second snippet, we have two functions defined in the backpassing style. The first function is:

numbers <-
    num <- List.map numbers

    num + 1

This function desugars to \numbers -> … and is being passed as the final argument to List.map lists.

The second function defined in backpassing style is:

    num <-

    num + 1

This function desugars to \numbers -> … and is being passed as the final argument to List.map numbers. That List.map numbers call is the body of the numbers <- function we defined in backpassing style a moment ago - so in a normal function definition, it would be \numbers -> List.map numbers …

Note that backpassing can be combined with the |> operator, which lets you call a function with two arguments missing from the end - one provided by the |> and the other provided by the <-, like so:

incrementedNumbers =
    num <-
        [1, 2, 3]
            |> List.reverse
            |> List.map

    num + 1

Here, the first argument to List.map is provided by the |> (namely the reversed [1, 2, 3] list), and the second argument is provided by +the <- (namely the \num -> … function).

Backpassing can also be used with functions that take multiple arguments; for example, you could write key, value <- Dict.map dictionary similarly to how we used List.map here. That would desugar into a Dict.map dictionary \key, value -> … function.

To be clear, backpassing is designed to be used with chaining functions like Task.await which are prone to lots of nesting. It isn't designed to be used with functions like List.map; this is just a simplified example to show that <- can be used with any function...even those where it doesn't improve code clarity!

Finally, here's an example combining backpassing with ordinary = definitions:

task =
    user <- Task.await fetchUser

    url = user.baseUrl

    settings, bio, posts <- Task.map3 (getSettings url) (getBio url) (getPosts url)

    profile = makeProfile settings bio

    Task.succeed { profile, posts }

Here, every new name that's introduced to scope is aligned on the left-hand edge of the expression - regardless of whether it's coming from = or from <-.

Numbers

Like Elm, Roc organizes numbers into integers and floating-point numbers. However, Roc breaks them down even further. For example, Roc has two different sizes of float types to choose from:

Both types are desirable in different situations. For example, when doing simulations, the precision of the F64 type is desirable. On the other hand, GPUs tend to heavily prefer 32-bit floats because a serious bottleneck is how long it takes data to transfer from CPU to GPU, so having to send half as many bytes per render (compared to 64-bit floats) can be huge for performance.

Roc also supports Dec, which is a 128-bit fixed-point decimal number. Dec is decimal-based, so 0.1 + 0.2 == 0.3 (whereas in binary floats this is not true), which makes it much better for calculations involving currency, among other use cases. The downside of Dec is that it does not have hardware support, so calculations involving them take longer than they do with floats.

Similarly to how there are different sizes of floating point numbers, there are also different sizes of integer to choose from:

  • I8
  • I16
  • I32
  • I64
  • I128

Roc also has unsigned integers which are never negative. They are U8, U16, U32, U64, and U128.

As with floats, which integer type to use depends on the values you want to support as well as your performance needs. For example, raw sequences of bytes are typically represented in Roc as List U8. You could also represent them as List U128, but it's much more efficient to use List U8, since each byte will be at most 255 anyway.

Like Elm, it's possible in Roc to have functions that work on either integers or floating-point numbers. However, the types are different. For example, the type of Num.add (which the + operator desugars to) is:

Num.add : Num a, Num a -> Num a

This accepts any of the numeric types discussed above, from I128 to F32 to D64 and everything in between. This is because those are all type aliases for Num types. For example:

  • I64 is a type alias for Num (Integer Signed64)
  • U8 is a type alias for Num (Integer Unsigned8)
  • F32 is a type alias for Num (Fraction Binary32)
  • Dec is a type alias for Num (Fraction Decimal)

(Those types like Integer, Fraction, and Signed64 are all defined like Never; you can never instantiate one. They are used only as phantom types.)

So Roc does not use number, but rather uses Num - which works more like List. Either way, you get + being able to work on both integers and floats!

Separately, there's also Int a, which is a type alias for Num (Integer a), and Frac a, which is a type alias for Num (Fraction a). These allow functions that can work on any integer or any fractional number. For example, Num.bitwiseAnd : Int a, Int a -> Int a.

In Roc, number literals with decimal points are Frac * values. Number literals without a decimal point are Num * values. Almost always these will end up becoming something more specific, but in the unlikely event (most often in a REPL) that you actually do end up with an operation that runs on either an Int * or a Num * value, it will default to being treated as an I64. Similarly, a Frac * value will default to being treated as a D64, which means if someone is learning Roc as their first programming language and they type 0.1 + 0.2 into a REPL, they won't be confused by the answer.

If you encounter integer or Dec overflow in Roc, by default you get a runtime exception. You can opt into wrapping integer overflow instead with functions like Num.addWrap : Int a, Int a -> Int a, or use a function that gives Err if it overflows, like Num.addChecked : Num a, Num a -> Result (Num a) [Overflow]*.

Also like Python Roc permits underscores in number literals for readability purposes. Roc also supports hexadecimal (0x01), octal (0o01), and binary (0b01) integer literals; these literals all have type Int * instead of Num *.

If you put these into a hypothetical Roc REPL, here's what you'd see:

> 1_024 + 1_024
2048 : Num *

> 1 + 2.14
3.14 : Frac *

> 1.0 + 1
2.0 : Frac *

> 1.1 + 0x11
<type mismatch between `1.1 : Frac *` and `0x11 : Int *`>

> 11 + 0x11
28 : Int *

Testing

Instead of a separate testing tool, Roc has a built-in expect keyword, which you can use in conjunction with roc test to run tests.

See the tutorial section on testing for details.

Abilities

comparable, appendable, and number don't exist in Roc.

  • number is replaced by Num, as described previously.
  • appendable is only used in Elm for the (++) operator, and Roc doesn't have that operator.
  • comparable is used in Elm for comparison operators (like < and such), plus List.sort, Dict, and Set. Roc's comparison operators (like <) only accept numbers; "foo" < "bar" is valid Elm, but will not compile in Roc. Roc's dictionaries and sets are hashmaps behind the scenes (rather than ordered trees), so their keys need to be hashable but not necessarily comparable.

That said, Roc's Dict and Set do have a restriction on their keys, just not comparable. See the section on Abilities in the language reference for details.

Standard library

elm/core has these modules:

  • Array
  • Basics
  • Bitwise
  • Char
  • Debug
  • Dict
  • List
  • Maybe
  • Platform
  • Platform.Cmd
  • Platform.Sub
  • Process
  • Result
  • Set
  • String
  • Task
  • Tuple

In Roc, the standard library is not a standalone package. It is baked into the compiler, and you can't upgrade it independently of a compiler release; whatever version of Roc you're using, that's the version of the standard library you're using too. (This is because Roc doesn't have a concept like Elm's Kernel; it would not be possible to ship Roc's standard library as a separate package!)

Roc's standard library has these modules:

  • Str
  • Bool
  • Num
  • List
  • Dict
  • Set
  • Result

Some differences to note:

  • All these standard modules are imported by default into every module. They also expose all their types (e.g. Bool, List, Result) but they do not expose any values - not even negate or not. (Ok and Err are ordinary tags, so they do not need to be exposed; they are globally available regardless!)
  • In Roc it's called Str instead of String.
  • List refers to something more like Elm's Array, as noted earlier.
  • No Char. This is by design. What most people think of as a "character" is a rendered glyph. However, rendered glyphs are comprised of grapheme clusters, which are a variable number of Unicode code points - and there's no upper bound on how many code points there can be in a single cluster. In a world of emoji, I think this makes Char error-prone and it's better to have Str be the only first-class unit. For convenience when working with unicode code points (e.g. for performance-critical tasks like parsing), the single-quote syntax is sugar for the corresponding U32 code point - for example, writing '鹏' is exactly the same as writing 40527. Like Rust, you get a compiler error if you put something in single quotes that's not a valid Unicode scalar value.
  • No Basics. You use everything from the standard library fully-qualified; e.g. Bool.not or Num.negate or Num.ceiling. There is no Never because [] already serves that purpose. (Roc's standard library doesn't include an equivalent of Basics.never, but it's one line of code and anyone can implement it: never = \a -> never a.)
  • No Tuple module, but there is syntax support for tuples which allows not only destructuring (like in Elm) but also direct field access - which looks like record field access, but with numbered indices instead of named fields. For example, the Elm code Tuple.first ( "a", "b" ) and Tuple.second ( "a", "b" ) could be written in Roc as ("a", "b").0 and ("a", "b").1. Roc tuples can also have more than two fields.
  • No Task. By design, platform authors implement Task (or don't; it's up to them) - it's not something that really could be usefully present in Roc's standard library.
  • No Process, Platform, Cmd, or Sub - similarly to Task, these are things platform authors would include, or not.
  • No Debug. Roc has a built-in dbg keyword instead of Debug.log and a crash keyword instead of Debug.todo.
  • No Maybe. This is by design. If a function returns a potential error, use Result with an error type that uses a zero-arg tag to describe what went wrong. (For example, List.first : List a -> Result a [ListWasEmpty]* instead of List.first : List a -> Maybe a.) If you want to have a record field be optional, use an Optional Record Field directly (see earlier). If you want to describe something that's neither an operation that can fail nor an optional field, use a more descriptive tag - e.g. for a nullable JSON decoder, instead of nullable : Decoder a -> Decoder (Maybe a), make a self-documenting API like nullable : Decoder a -> Decoder [Null, NonNull a]*.

Operator Desugaring Table

Here are various Roc expressions involving operators, and what they desugar to.

Expression Desugars to
a + b Num.add a b
a - b Num.sub a b
a * b Num.mul a b
a / b Num.div a b
a // b Num.divTrunc a b
a ^ b Num.pow a b
a % b Num.rem a b
a >> b Num.shr a b
a << b Num.shl a b
-a Num.neg a
-f x y Num.neg (f x y)
a == b Bool.isEq a b
a != b Bool.isNotEq a b
a && b Bool.and a b
a || b Bool.or a b
!a Bool.not a
!f x y Bool.not (f x y)
a |> b b a
a b c |> f x y f (a b c) x y