diff --git a/tests/README.md b/tests/README.md
new file mode 100644
index 0000000..68c5981
--- /dev/null
+++ b/tests/README.md
@@ -0,0 +1,39 @@
+## Maldet Tests
+
+### Concept:
+
+1. Create a framework for tests that can be run to confirm or deny the effectiveness of changes that were made.
+2. Create tests for the most recent pull requests that conform to the rules laid out herein, both to confirm the effectiveness of those pull requests, and to serve as examples for the creation of future tests.
+3. Over time grow a body of historical tests that will be able to be run against future versions of Linux Malware Detect in order increase awareness of situations where new environments or recent updates have broken historical functionality.
+
+### Test Rules:
+
+1. The script "/usr/local/maldetect/tests/test.sh" will iterate through all of the test scripts that follow the naming conventions (see below). Optionally, test.sh can be given an argument of the name of one or more specific test scripts to run (whether or not the meet the naming conventions).
+2. The "test.sh" script will export the following variables to be used by the test scripts that it runs:
+   - $d\_MALDET - The directory "/usr/local/maldetect"
+   - $d\_MALDET\_TESTS - The directory "/usr/local/maldetect/tests"
+   - $d\_MALDET\_TESTS\_WORKING - The directory "/usr/local/maldetect/tests/working"
+3. The test scripts should only create, modify, or destroy files within $d\_MALDET\_TESTS\_WORKING.
+   - Typical functions of Maldet may, of course, modify other files outside of this.
+4. If the tests within a test script are considered to have failed, they need to exit with "exit 1" or some other non-zero exit code. test.sh will stop when it encounters a test that exited in this manner.
+5. The tests scripts should not be executable; test.sh will toggle their executability as needed.
+6. It is preferred when ever possible that the tests actually run the executable they are testing (usually "maldet"). If this is not possible, copying files from the project and modifying them in-line is the preferred alternative.
+   - Under such circumstances, the test script must give warning output indicating that such is the case.
+     - See tests_000299.sh for an example of this.
+7. There is no expectation that every slightest change be tested.
+   - Example: The changes from pull request 300 are simple, self-evident, and should work across all versions of bash; writing a test for them seems silly.
+   - Example: Functionality unchanged from version 1.6.2 or before has been used heavily enough that if there are issues, it is likely that they either would have come to light by now, or are so edge-case that tests might fail to capture them anyway.
+   - This all being said, testing changes really is a best practice
+
+### Conventions:
+
+1. File Names: Test scripts should be named like the following: "tests_[NUMBER].[EXTENSION]"
+   - In the instances where the change is associated with a pull request or an issue, the number will be the number of that pull request or issue represented in six digits with leading zeros.
+     - Because the pull request number cannot be known for certain beforehand, it is acceptable when submitting pull requests that include a test script to give it any name beginning with "tests_". This will be changed at a later date to match the format specified above.
+   - In the instances where the change is NOT associated with a pull request or an issue, the number will be the date on which the commit was made in eight digit "YYYYMMDD" format, optionally with an underscore and more numbers following (if multiple test files need to be added on a single date).
+   - The purpose of this naming system is to make it easy to go back through the git history to find more details on what the test is supposed to be testing against.
+2. Colored Output: When possible, colored output should be used under the following circumstances:
+   - Blue (\e[34m) at the beginning of the test for a brief description of what's being tested.
+   - Yellow (\e[33m) to indicate soft-fails or important information that the user needs to be aware of.
+   - Green (\e[32m) to indicate success.
+   - Red (\e[31m) to indicate hard failures or critical warnings.
diff --git a/tests/test.sh b/tests/test.sh
new file mode 100755
index 0000000..7bb2c82
--- /dev/null
+++ b/tests/test.sh
@@ -0,0 +1,112 @@
+#! /bin/bash
+
+#====================================#
+#== Initial Variables and Settings ==#
+#====================================#
+
+set -e
+
+export PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
+
+export d_MALDET="/usr/local/maldetect"
+export d_MALDET_TESTS="$d_MALDET"/tests
+export d_MALDET_TESTS_WORKING="$d_MALDET_TESTS"/working
+
+b_SPECIFIC=false
+
+#===============#
+#== Functions ==#
+#===============#
+
+function fn_run_test {
+	local f_TEST=
+	### Make sure that we have everything in place necessary to run a test
+	if [[ -n "$1" && -n $d_MALDET && -n "$d_MALDET_TESTS" && -n "$d_MALDET_TESTS_WORKING" ]]; then
+		f_TEST="$1"
+	else
+		echo "Test file does not exist or required variables not set" > /dev/stderr
+		fn_unskip
+		exit 1
+	fi
+
+	### Destroy and create the working directory
+	if [[ -d "$d_MALDET_TESTS_WORKING" ]]; then
+		rm -rf "$d_MALDET_TESTS_WORKING"
+	fi
+	mkdir "$d_MALDET_TESTS_WORKING"
+
+	### Make the test executable
+	if [[ ! -x "$d_MALDET_TESTS"/"$f_TEST" ]]; then
+		chmod +x "$d_MALDET_TESTS"/"$f_TEST"
+	fi
+
+	### Run the test script
+	v_SUCCESS=true
+	echo -e "\e[34mRunning tests from file '$f_TEST'\e[00m"
+	"$d_MALDET_TESTS"/"$f_TEST" || v_SUCCESS=false
+
+	### Make the test no longer executable
+	chmod -x "$d_MALDET_TESTS"/"$f_TEST"
+
+	### Exit if the test failed
+	if [[ "$v_SUCCESS" == false ]]; then
+		### If the script failed, exit
+		echo -e "\e[31mFile '$f_TEST': Failed\e[00m" > /dev/stderr
+		if [[ "$b_SPECIFIC" == false ]]; then
+			echo "To skip these tests, add the flags '--skip $f_TEST'"
+		fi
+		fn_unskip 
+		exit 1
+	fi
+	echo -e '\e[32mFile '$f_TEST': Success!\e[00m'
+}
+
+function fn_unskip {
+	local v_NAME=
+	for i in $( ls -1 "$d_MALDET_TESTS" | grep -E "^skipped_tests_[0-9_]+\.[^.]+$" ); do
+		v_NAME="$( echo "$i" | sed "s/^skipped_//" )"
+		mv -f "$d_MALDET_TESTS"/"$i" "$d_MALDET_TESTS"/"$v_NAME"
+	done
+}
+
+#=====================#
+#== Parse Arguments ==#
+#=====================#
+
+echo "Warning: It's possible that running these tests while there are ongoing scans or monitoring jobs might negatively impact both the ongoing processes and the results of this test."
+read -ep "Are you sure that you want to continue? (Y/n) " v_CONTINUE
+v_CONTINUE="${v_CONTINUE:0:1}"
+if [[ "$v_CONTINUE" == "n" || "$v_CONTINUE" == "N" ]]; then
+	exit 0
+fi
+
+fn_unskip
+if [[ -n "$1" && "$1" != "--skip" ]]; then
+### Run a single test script
+	b_SPECIFIC=true
+	while [[ -n "$1" ]]; do
+		if [[ -f "$d_MALDET_TESTS"/"$1" ]]; then
+			fn_run_test "$1"
+		fi
+		shift
+	done
+	exit 0
+else
+	### Skip any tests that were specified to be skipped
+	if [[ "$1" == "--skip" ]]; then
+		shift
+		while [[ -n "$1" ]]; do
+			if [[ -f "$d_MALDET_TESTS"/"$1" && $( echo "$1" | grep -Ec "^tests_[0-9_]+\.[^.]+$" ) -gt 0 ]]; then
+				mv -f "$d_MALDET_TESTS"/"$1" "$d_MALDET_TESTS"/skipped_"$1"
+			fi
+			shift
+		done
+	fi
+
+	### Iterate through all of the test scripts
+	for i in $( ls -1 "$d_MALDET_TESTS" | sort -n | grep -E "^tests_[0-9_]+\.[^.]+$" ); do
+		### Announce the set of tests that we're running
+		fn_run_test "$i"
+	done
+	exit 0
+fi
diff --git a/tests/tests_000292.sh b/tests/tests_000292.sh
new file mode 100644
index 0000000..6ce5828
--- /dev/null
+++ b/tests/tests_000292.sh
@@ -0,0 +1,120 @@
+#! /bin/bash
+
+echo -e "\e[34mTesting '--monitor' and tlog functionality\e[00m"
+
+v_INOTIFY="$( which inotifywait 2> /dev/null || true )"
+if [[ -z "$v_INOTIFY" ]]; then
+	echo -e "\e[33mCommand 'inotifywait' not present. Skipping tests.\e[00m"
+	exit 0
+fi
+
+echo "Note: Instead of using the maldet executable, this test copies and makes modifications to it and other files. If this test fails, it might be a result of unexpected future changes to the following:"
+echo "'$d_MALDET/maldet'"
+echo "'$d_MALDET/internals/functions"
+
+function fn_warn_maldet {
+	echo
+	echo -e "\e[33mWARNING: There is potentially an active maldet monitoring job ongoing. The above output will tell you whether or not this is the case. You will likely want to kill this with the following command:\e[00m"
+	echo "$d_MALDET_TESTS_WORKING/maldet -k"
+	echo
+	exit 1
+}
+
+### Make a copy of the files we need to change
+cp -a "$d_MALDET"/maldet "$d_MALDET_TESTS_WORKING"/maldet
+cp -a "$d_MALDET"/internals/functions "$d_MALDET_TESTS_WORKING"/functions
+
+### Modify maldet executable to point to the modified functions file
+sed -i '/source $intfunc/i intfunc="'"$d_MALDET_TESTS_WORKING/functions\"" "$d_MALDET_TESTS_WORKING"/maldet
+### Modify functions file to set specific variables during the monitoring cycle
+sed -i '/^monitor_cycle[(][)] {/a d_TEST="'"$d_MALDET_TESTS_WORKING"'"; inotify_log="$d_TEST"/inotify_log; inotify_trim=1100' "$d_MALDET_TESTS_WORKING"/functions
+### Modify functions file to set specific variables when monitoring is initiated
+sed -i '/^monitor_init[(][)] {/a d_TEST="'"$d_MALDET_TESTS_WORKING"'"; inotify_log="$d_TEST"/inotify_log' "$d_MALDET_TESTS_WORKING"/functions
+### Truncate the monitor check process - we don't need all of it
+sed -i '/monitor_scanlist=/a monitor_scanlist="'"$d_MALDET_TESTS_WORKING"'"/scan_list' "$d_MALDET_TESTS_WORKING"/functions
+sed -i '/$tlog $inotify_log/a '"}\n\nsomething_else() {" "$d_MALDET_TESTS_WORKING"/functions
+### Modify functions file allow the monitoring cycle to be triggered on demand
+sed -i '/sleep $inotify_sleep/i while [ ! -f "$d_TEST"/loop ]; do inotify_sleep=1' "$d_MALDET_TESTS_WORKING"/functions
+sed -i '/sleep $inotify_sleep/a done; rm -f "$d_TEST"/loop' "$d_MALDET_TESTS_WORKING"/functions
+### Modify functions file to set a new file for inotify paths
+sed -i '/inotify_fpaths="$sessdir\/inotify.paths.$$"/a inotify_fpaths="$d_TEST"/inotify.paths.12345' "$d_MALDET_TESTS_WORKING"/functions
+
+### Make the directory that inotify will be monitoring:
+mkdir "$d_MALDET_TESTS_WORKING"/monitor_test
+
+### Clear the tlog inotify file
+rm -f "$d_MALDET"/tmp/inotify
+
+echo
+### Start the inotify job
+v_MALDET_RUN=true
+"$d_MALDET_TESTS_WORKING"/maldet -m "$d_MALDET_TESTS_WORKING"/monitor_test || v_MALDET_RUN=false
+echo
+
+### Did maldet error out?
+if [[ $v_MALDET_RUN == false ]]; then
+	echo "Maldet either failed to run, or exited with a non-zero exit code" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Did the inotify job start?
+if [[ ! -f "$d_MALDET_TESTS_WORKING"/inotify_log ]]; then
+	echo "Either the inotify job failed to start, or the attempts to modify the functions file failed" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Modify a few files:
+v_COUNT=0
+echo -n "$v_COUNT" > "$d_MALDET_TESTS_WORKING"/monitor_test/foo
+echo -n "$v_COUNT" > "$d_MALDET_TESTS_WORKING"/monitor_test/foobar
+
+### Make sure the modifications were seen
+sleep 1
+v_TEST="$( grep -c "$d_MALDET_TESTS_WORKING/monitor_test/foo" "$d_MALDET_TESTS_WORKING"/inotify_log )"
+if [[ "$v_TEST" -eq 0 ]]; then
+	echo "inotify job failed to recognize changes" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Modify a lot of files
+echo "This may take a while"
+while [[ "$( wc -l "$d_MALDET_TESTS_WORKING"/inotify_log | cut -d " " -f1 )" -lt 1200 ]]; do
+	echo -n "$v_COUNT" > "$d_MALDET_TESTS_WORKING"/monitor_test/bar
+	v_COUNT=$(( $v_COUNT + 1 ))
+done
+echo -n "$v_COUNT" > "$d_MALDET_TESTS_WORKING"/monitor_test/foo
+echo -n "$v_COUNT" > "$d_MALDET_TESTS_WORKING"/monitor_test/foobar
+
+### count the lines, initiate a loop, then count the lines again
+v_LINES="$( wc -l "$d_MALDET_TESTS_WORKING"/inotify_log | cut -d " " -f1 )"
+touch "$d_MALDET_TESTS_WORKING"/loop
+sleep 2
+v_LINES2="$( wc -l "$d_MALDET_TESTS_WORKING"/inotify_log | cut -d " " -f1 )"
+
+### Test if the file length decreased
+if [[ "$v_LINES" -le "$v_LINES2" ]]; then
+	echo "Failed to trim inotify log" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Test that the most recent changes are present
+v_TEST1="$( tail -n6 "$d_MALDET_TESTS_WORKING"/inotify_log | grep -c "monitor_test/foo[[:blank:]]" )"
+v_TEST2="$( tail -n6 "$d_MALDET_TESTS_WORKING"/inotify_log | grep -c "monitor_test/foobar[[:blank:]]" )"
+if [[ "$v_TEST1" -lt 1 || "$v_TEST2" -lt 1 ]]; then
+	echo "Most recent changes are not present. Are we trimming from the end of the file?" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Test that the tlog file has the correct number of characters listed
+v_CHARS="$( wc -c "$d_MALDET_TESTS_WORKING"/inotify_log | cut -d " " -f1 )"
+v_CHARS2="$( cat "$d_MALDET"/tmp/inotify 2> /dev/null || true )"
+if [[ "$v_CHARS" != "$v_CHARS2" ]]; then
+	echo "tlog file was not updated correctly" > /dev/stderr
+	fn_warn_maldet
+fi
+
+### Test that it was successfully killed
+v_INOTIFY_PID="$( pgrep -f inotify.paths.[0-9]+ )"
+kill -9 "$v_INOTIFY_PID"
+
+
diff --git a/tests/tests_000299.sh b/tests/tests_000299.sh
new file mode 100644
index 0000000..d8ba538
--- /dev/null
+++ b/tests/tests_000299.sh
@@ -0,0 +1,68 @@
+#! /bin/bash
+
+echo -e "\e[34mTesting order of command line arguments\e[00m"
+
+echo "Note: Instead of using the maldet executable, this test copies and makes modifications to it and other files. If this test fails, it might be a result of unexpected future changes to the following:"
+echo "'$d_MALDET/maldet'"
+echo "'$d_MALDET/internals/functions"
+
+### Make a copy of the files we need to change
+cp -a "$d_MALDET"/maldet "$d_MALDET_TESTS_WORKING"/maldet
+cp -a "$d_MALDET"/internals/functions "$d_MALDET_TESTS_WORKING"/functions
+
+### Modify maldet executable to print the word "background" and exit if background mode is invoked
+sed -i '/-b|--background)/a echo "background";exit' "$d_MALDET_TESTS_WORKING"/maldet
+### Modify maldet executable to point to the modified functions file
+sed -i '/source $intfunc/i intfunc="'"$d_MALDET_TESTS_WORKING/functions\"" "$d_MALDET_TESTS_WORKING"/maldet
+### Modify functions file so that the scan function prints the word "scan" and immediately exits
+sed -i '/^scan[(][)] {/a echo "scan";exit' "$d_MALDET_TESTS_WORKING"/functions
+### Modify functions file so that the sigup function prints the word "update" and immediately exits
+sed -i '/^sigup[(][)] {/a echo "update";exit' "$d_MALDET_TESTS_WORKING"/functions
+### Modify functions file so that the usage_long function prints the word "help" and immediately exits
+sed -i '/^usage_long[(][)] {/a echo "help";exit' "$d_MALDET_TESTS_WORKING"/functions
+
+### Run the modified scripts and see if they behave as expected
+### Just "-a" launches a scan
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a /home/user/public_html | tail -n1 )"
+if [[ $v_TEST != "scan" ]]; then
+	echo "Test 1 failed" > /dev/stderr
+	exit 1
+fi
+### "-u" at any position, with or without "--force" starts and update before the scan
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -u -a /home/user/public_html | tail -n1 )"
+if [[ $v_TEST != "update" ]]; then
+	echo "Test 2 failed" > /dev/stderr
+	exit 1
+fi
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a /home/user/public_html -u | tail -n1 )"
+if [[ $v_TEST != "update" ]]; then
+	echo "Test 3 failed" > /dev/stderr
+	exit 1
+fi
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -u --force -a /home/user/public_html | tail -n1 )"
+if [[ $v_TEST != "update" ]]; then
+	echo "Test 4 failed" > /dev/stderr
+	exit 1
+fi
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a /home/user/public_html -u --force | tail -n1 )"
+if [[ $v_TEST != "update" ]]; then
+	echo "Test 5 failed" > /dev/stderr
+	exit 1
+fi
+### "--help" at any position launches help before anything else
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a --help /home/user/public_html -u --force | tail -n1 )"
+if [[ $v_TEST != "help" ]]; then
+	echo "Test 6 failed" > /dev/stderr
+	exit 1
+fi
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a /home/user/public_html -u --force --help | tail -n1 )"
+if [[ $v_TEST != "help" ]]; then
+	echo "Test 7 failed" > /dev/stderr
+	exit 1
+fi
+### "-b" updates whether we're in the background even if it comes after "-a"
+v_TEST="$( "$d_MALDET_TESTS_WORKING"/maldet -a /home/user/public_html -u --force -b | tail -n1 )"
+if [[ $v_TEST != "background" ]]; then
+	echo "Test 8 failed" > /dev/stderr
+	exit 1
+fi
diff --git a/tests/tests_000304.sh b/tests/tests_000304.sh
new file mode 100644
index 0000000..9aa984d
--- /dev/null
+++ b/tests/tests_000304.sh
@@ -0,0 +1,45 @@
+#! /bin/bash
+
+echo -e "\e[34mTesting parsing of '--config-option' argument\e[00m"
+
+echo "Note: Instead of using the maldet executable, this test copies and modifies it. If this test fails, it might be a result of unexpected future changes to '$d_MALDET/maldet'"
+
+### Make a copy of the maldet executable
+cp -a "$d_MALDET"/maldet "$d_MALDET_TESTS_WORKING"/maldet
+
+### Find the line number for the "-co" / "--config-option" argument
+v_CO_LINE="$( grep -En "^[[:blank:]]*-co" "$d_MALDET_TESTS_WORKING"/maldet | cut -d ":" -f1 )"
+### Find the line number for where the next argument begins
+v_NEXT_ARG_LINE="$( grep -En "^[[:blank:]]*(-|esac)" "$d_MALDET_TESTS_WORKING"/maldet | cut -d ":" -f1 | grep -A1 "^$v_CO_LINE" | tail -n1 )"
+
+### Find the line number for the last time that we write something to "$tmpco" while processing the "-co" / "--config-option" argument
+v_TMPCO_LINE=
+for i in $( grep -En '> ?"?\$tmpco' "$d_MALDET_TESTS_WORKING"/maldet | cut -d ":" -f1 ); do
+	if [[ "$i" -gt "$v_CO_LINE" && "$i" -lt "$v_NEXT_ARG_LINE" ]]; then
+		v_TMPCO_LINE="$i"
+	elif [[ "$i" -ge "$v_NEXT_ARG_LINE" ]]; then
+		break
+	fi
+done
+
+if [[ -z "$v_TMPCO_LINE" ]]; then
+	echo 'Was not able to find file "$tmpco" being written to while processing the argument "-co" / "--config-option"' > /dev/stderr
+	exit 1
+fi
+
+### Modify maldet so that it will print the file and then exit rather than deleting the file and moving forward
+sed -i "$(( $v_TMPCO_LINE + 1 ))i"'cat $tmpco; exit' "$d_MALDET_TESTS_WORKING"/maldet
+
+### Create an import the temp conf file
+v_CONF=scan_tmpdir_paths="/tmp /var/tmp /dev/shm",inotify_docroot="public_html,public_ftp",md5sum="/sbin/md5",MONITOR_MODE="users",compatcnf="/home/user/malicious_executable.sh"
+"$d_MALDET_TESTS_WORKING"/maldet -co "$v_CONF" > "$d_MALDET_TESTS_WORKING"/source
+. "$d_MALDET_TESTS_WORKING"/source
+
+### Test the variables that were imported
+if [[ "$scan_tmpdir_paths" != "/tmp /var/tmp /dev/shm" || "$inotify_docroot" != "public_html,public_ftp" || "$md5sum" != "/sbin/md5" || "$MONITOR_MODE" != "users" || -n "$compatcnf" ]]; then
+	echo 'Failed to parse "-co" arguments correctly' > /dev/stderr
+	exit 1
+fi
+
+exit 0
+
diff --git a/tests/tests_20180908_1.sh b/tests/tests_20180908_1.sh
new file mode 100644
index 0000000..8753191
--- /dev/null
+++ b/tests/tests_20180908_1.sh
@@ -0,0 +1,51 @@
+#! /bin/bash
+
+echo -e "\e[34mTesting scanning with clamscan\e[00m"
+
+### Copy over files
+cp -a "$d_MALDET"/maldet "$d_MALDET_TESTS_WORKING"/maldet
+cp -a "$d_MALDET"/internals/functions "$d_MALDET_TESTS_WORKING"/functions
+
+v_CONFIG=email_alert="0",scan_clamscan="1",quarantine_hits="0",quarantine_clean="0",quarantine_suspend_user="0",scan_tmpdir_paths="",ignore_paths="$d_MALDET_TESTS_WORKING/ignore_paths"
+
+### Modify maldet executable to point to the modified functions file
+sed -i '/source $intfunc/i intfunc="'"$d_MALDET_TESTS_WORKING/functions\"" "$d_MALDET_TESTS_WORKING"/maldet
+### Find the correct line in "finctions" to insert
+v_SELECTOR_LINE="$( grep -n "^clamselector[(][)]" "$d_MALDET_TESTS_WORKING"/functions | cut -d ":" -f1 )"
+v_SELECTOR_END=
+for i in $( grep -n "^[[:blank:]]*}" ../internals/functions | cut -d ":" -f1 ); do
+	if [[ "$i" -gt "$v_SELECTOR_LINE" ]]; then
+		v_SELECTOR_END="$i"
+		break
+	fi
+done
+### Test if we were able to find that line
+if [[ -z "$v_SELECTOR_END" ]]; then
+	echo "Cannot find the end of the 'clamselector' function. Moving forward with tests and crossing fingers"
+else
+	### Modify "functions" to exit out of clamselector with the current value of "$scan_clamscan"
+	sed -i "$v_SELECTOR_END"'iecho "$scan_clamscan"; exit' "$d_MALDET_TESTS_WORKING"/functions
+	### Checking if clamscan is present
+	v_RESULTS="$( "$d_MALDET_TESTS_WORKING"/maldet --config-option "$v_CONFIG" -a "$d_MALDET_TESTS_WORKING" | tail -n1 )"
+	if [[ "$v_RESULTS" == "0" ]]; then
+		echo -e "\e[33mClamscan not present. Skipping tests.\e[00m"
+		exit 0
+	fi
+fi
+
+### Acquire malicious files
+wget -qO "$d_MALDET_TESTS_WORKING"/de404053a7f33585cd1ff655f62dec85 'https://raw.githubusercontent.com/rfxn/magento-malware-collection/master/malware/backend/de404053a7f33585cd1ff655f62dec85'
+wget -qO "$d_MALDET_TESTS_WORKING"/8a86a21550fb7583887d8cecd484b497 'https://raw.githubusercontent.com/rfxn/magento-malware-collection/master/malware/backend/8a86a21550fb7583887d8cecd484b497'
+
+### Change the ownership on said files
+chown 500:500 "$d_MALDET_TESTS_WORKING"/*
+touch "$d_MALDET_TESTS_WORKING"/ignore_paths
+
+### Scan those files with clamscan
+v_RESULTS="$( "$d_MALDET"/maldet --config-option "$v_CONFIG" -a "$d_MALDET_TESTS_WORKING" | grep "scan report saved" | awk '{print $NF}' )"
+
+### 
+if [[ $( grep -c "de404053a7f33585cd1ff655f62dec85\|8a86a21550fb7583887d8cecd484b497" "$d_MALDET"/sess/session.hits."$v_RESULTS" ) -ne 2 ]]; then
+	echo "Scanning with Clamscan has failed" 2> /dev/stderr
+	exit 1
+fi
diff --git a/tests/tests_20180908_2.sh b/tests/tests_20180908_2.sh
new file mode 100644
index 0000000..c48ff1b
--- /dev/null
+++ b/tests/tests_20180908_2.sh
@@ -0,0 +1,21 @@
+#! /bin/bash
+
+echo -e "\e[34mTesting scanning without clamscan\e[00m"
+
+### Acquire malicious files
+wget -qO "$d_MALDET_TESTS_WORKING"/de404053a7f33585cd1ff655f62dec85 'https://raw.githubusercontent.com/rfxn/magento-malware-collection/master/malware/backend/de404053a7f33585cd1ff655f62dec85'
+wget -qO "$d_MALDET_TESTS_WORKING"/8a86a21550fb7583887d8cecd484b497 'https://raw.githubusercontent.com/rfxn/magento-malware-collection/master/malware/backend/8a86a21550fb7583887d8cecd484b497'
+
+### Change the ownership on said files
+chown 500:500 "$d_MALDET_TESTS_WORKING"/*
+touch "$d_MALDET_TESTS_WORKING"/ignore_paths
+
+### Scan those files without clamscan
+v_CONFIG=email_alert="0",scan_clamscan="0",quarantine_hits="0",quarantine_clean="0",quarantine_suspend_user="0",scan_tmpdir_paths="",ignore_paths="$d_MALDET_TESTS_WORKING/ignore_paths"
+v_RESULTS="$( "$d_MALDET"/maldet --config-option "$v_CONFIG" -a "$d_MALDET_TESTS_WORKING" | grep "scan report saved" | awk '{print $NF}' )"
+
+### 
+if [[ $( grep -c "de404053a7f33585cd1ff655f62dec85\|8a86a21550fb7583887d8cecd484b497" "$d_MALDET"/sess/session.hits."$v_RESULTS" ) -ne 2 ]]; then
+	echo "Scanning without Clamscan has failed" 2> /dev/stderr
+	exit 1
+fi