Skip to content

Latest commit

 

History

History
926 lines (718 loc) · 31.3 KB

configuration.mkd

File metadata and controls

926 lines (718 loc) · 31.3 KB
Raw

Dynamic Environment Configuration

R10k uses a configuration file to determine how dynamic environments should be deployed.

Config file location

Manual configuration

An explicit configuration file location be specified by providing the --config option to r10k deploy, like so:

r10k deploy --config /srv/puppet/r10k.yaml [...]

Automatic configuration

If an explicit configuration file is not given, r10k will search the following locations for a configuration file.

  • {current working directory}/r10k.yaml
  • /etc/puppetlabs/r10k/r10k.yaml (1.5.0 and later)
  • /etc/r10k.yaml (deprecated in 1.5.0)

In 1.5.0 r10k added /etc/puppetlabs/r10k/r10k.yaml to the configuration search path. The old location, /etc/r10k.yaml has been deprecated in favor of the new location. If both /etc/puppetlabs/r10k/r10k.yaml and /etc/r10k.yaml exist and explicit configuration file has not been given, r10k will log a warning and use /etc/puppetlabs/r10k/r10.yaml.

General options

cachedir

The 'cachedir' setting specifies where r10k should keep cached information. Right now this is predominantly used for caching git repositories but will be expanded as other subsystems can take advantage of caching.

For example:

---
# Store all cache information in /var/cache
cachedir: '/var/cache/r10k'

The cachedir setting defaults to ~/.r10k. If the HOME environment variable is unset r10k will assume that r10k is being run with the Puppet prerun_command setting and will set the cachedir default to /root/.r10k.

proxy

The 'proxy' setting configures a proxy server to use for all operations which occur over an HTTP(S) transport. You can override this setting for Git or Forge operations only by setting the 'proxy' setting under the 'git' or 'forge' settings. You can also override for a specific Git repository by setting a proxy in the 'repositories' list of the 'git' setting. By default, r10k will look for and use the first environment variable it finds in this list: HTTPS_PROXY, https_proxy, HTTP_PROXY, http_proxy. If no proxy setting is found in the environment, this setting will default to use no proxy.

proxy: 'http://proxy.example.com:3128'

r10k also supports using authenticated proxies with either Basic or Digest authentication:

proxy: 'http://user:[email protected]:3128'

The proxy server being used will be logged at the "debug" level when r10k runs.

pool_size

The pool_size setting is a number to determine how many threads should be spawn while updating modules. The default value is 4, which means modules will be updated in parallel. If this causes issues, change this setting to 1 to cause modules to be updated serially.

git

The 'git' setting is a hash that contains Git specific settings.

provider

The provider option determines which Git provider should be used.

git:
  provider: rugged # one of shellgit, rugged

See the git provider documentation for more information regarding Git providers.

default_ref

r10k is unable to deploy a git module if no ref is specified. A default_ref can be set in the r10k config that will become the ref a module uses if not otherwise specified. This is the lowest priority setting for a module's ref. Read the Puppetfile documentation for higher priority settings to determine a module's ref.

git:
  default_ref: main

proxy

The 'proxy' setting allows you to set or override the global proxy setting specifically for Git operations that use an HTTP(S) transport. See the global proxy setting documentation for more information and examples.

username

The username setting is only used by the Rugged git provider.

The username option sets the username for SSH remotes when the SSH URL does not provide a username. When used with a Git hosting service this is most sensibly set to 'git'.

The username defaults to the username of the currently logged in user.

git:
  username: "git"

private_key

The private_key setting is only used by the Rugged git provider.

The private_key option specifies the path to the default Git SSH private key for Git SSH remotes. The private_key setting must be set if SSH remotes are used.

git:
  private_key: "/etc/puppetlabs/r10k/ssh/id_rsa"

oauth_token

The oauth_token setting is only used by the Rugged git provider.

The oauth_token option specifies the path to the default access token for Git HTTPS remotes. Public git repositories can be accessed via HTTPS without authentication, but the oauth_token setting may be set if any non-public HTTPS remotes are used.

git:
  oauth_token: "/etc/puppetlabs/r10k/token"

repositories

The repositories option allows configuration to be set on a per-remote basis. Each entry is a map of the repository URL and per-repository configuration for that repo.

private_key

A repository specific private key to use for SSH connections for the given repository URL. This overrides the global private_key setting.

git:
  repositories:
    - remote: "ssh://tessier-ashpool.freeside/protected-repo.git"
      private_key: "/etc/puppetlabs/r10k/ssh/id_rsa-protected-repo-deploy-key"
oauth_token

A repository specific access token to use for HTTPS connections for the given repository URL. This overrides the global oauth_token setting.

git:
  repositories:
    - remote: "https://tessier-ashpool.freeside/protected-repo.git"
      oauth_token: "/etc/puppetlabs/r10k/protected-repo-deploy-token"
proxy

The 'proxy' setting allows you to set or override the global proxy setting for a single, specific repository. See the global proxy setting documentation for more information and examples.

forge

The 'forge' setting is a hash that contains settings for downloading modules from the Puppet Forge.

proxy

The 'proxy' setting allows you to set or override the global proxy setting for all Forge interactions. See the global proxy setting documentation for more information and examples.

baseurl

The 'baseurl' setting indicates where Forge modules should be installed from. This defaults to 'https://forgeapi.puppetlabs.com'

authorization_token

The 'authorization_token' setting allows you to provide a token for authenticating to a Forge server. You will need to prepend your token with 'Bearer ' to authenticate to the Forge or when using your own Artifactory server.

forge:
  baseurl: 'https://private-forge.mysite'
  authorization_token: 'Bearer mysupersecretauthtoken'

allow_puppetfile_override

The allow_puppetfile_override setting causes r10k to respect forge declarations in Puppetfiles, overriding the baseurl setting and allowing per-environment configuration of the Forge URL.

Deployment options

The following options configure how r10k deploys dynamic environments.

postrun

The postrun setting specifies an arbitrary command to run after deploying all environments. The command must be an array of strings that will be used as an argument vector. The exit code of the command is not currently used, but the command should exit with a return code of 0 as the exit code may have semantics in the future.

---
postrun: ['/usr/bin/curl', '-F', 'deploy=done', 'http://my-app.site/endpoint']

The postrun setting can only be set once.

Occurrences of the string $modifiedenvs in the postrun command will be replaced with the current environment(s) being deployed, space separated.

sources

The sources setting specifies what repositories should be used for creating dynamic environments. It is a hash where each key is the short name of a specific repository (for instance, "qa" or "web" or "ops") and the value is a hash of properties for that source.

---
sources:
  main:
    # Source settings follow

deploy

The deploy setting is a top level setting for controlling how r10k deploys behave. At this point only new settings are included under this setting, but in the long term the current top level deploy settings will be moved under deploy.

purge_levels

The purge_levels setting controls how aggressively r10k will purge unmanaged content during a deployment. Given value must be a list of strings indicating at what levels unmanaged content should be purged. The valid string options for the list are 'deployment', 'environment', and 'puppetfile'.

---
deploy:
  purge_levels: [ 'deployment', 'environment', 'puppetfile' ]

This setting currently only impacts the "deploy environment" action.

The default value is ['deployment', 'puppetfile'] to maintain parity with existing behavior before this setting was added.

The effect of enabling the various purge levels is as follows:

deployment

After each deploy, in the configured basedir, r10k will recursively remove any content found which is not managed by one of the sources declared in the r10k.yaml configuration. Note that disabling this level of purging may cause the number of deployed environments to grow without bound; deleting branches from a control repo would no longer cause the matching environment to be purged.

environment

After a given environment is deployed, r10k will recursively remove any content found which is neither committed to the control repo branch that maps to that environment, nor declared in a Puppetfile committed to that branch.

Enabling this purge level will cause r10k to load and parse the Puppetfile for the environment even without the --modules flag being set. However, Puppetfile content will still only be deployed if the environment is new or the --modules flag is set. Additionally, no environment-level content will be purged if any errors are encountered while evaluating the Puppetfile or deploying its contents.

Note that the .r10k-deploy.json file is exempt from this purging.

puppetfile

After Puppetfile content for a given environment is deployed, r10k will recursively remove any content found in a directory managed by the Puppetfile which is not also declared in that Puppetfile. Directories considered to be managed by a Puppetfile include the configured moduledir (which defaults to "modules") as well as alternate directories specified as an install_path option to any Puppetfile content declarations.

purge_allowlist

The purge_allowlist setting exempts the specified filename patterns from being purged. This setting is currently only considered during environment level purging. (See above.) Given value must be a list of shell style filename patterns in string format.

See the Ruby documentation for the fnmatch method for more details on valid patterns. Note that the FNM_PATHNAME and FNM_DOTMATCH flags are in effect when r10k considers the allowlist.

Patterns are relative to the root of the environment being purged and do not match recursively by default. For example, a allowlist value of *myfile* would only preserve a matching file at the root of the environment. To preserve the file throughout the deployed environment, a recursive pattern such as **/*myfile* would be required.

Files matching a allowlist pattern may still be removed if they exist in a folder that is otherwise subject to purging. In this case, an additional allowlist rule to preserve the containing folder is required.

---
deploy:
  purge_allowlist: [ 'custom.json', '**/*.xpp' ]

write_lock

The write_lock setting allows administrators to temporarily disallow r10k code deploys without having to remove the r10k configuration entirely. This can be useful to prevent r10k deploys at certain times or prevent r10k from interfering with a common set of code that may be touched by multiple r10k configurations.

---
deploy:
  write_lock: "Deploying code is disallowed until the next maintenance window (2038-01-19)"

generate_types

The generate_types setting controls whether r10k should update generated types after a successful environment update. See Environment isolation for more information on generated types. Defaults to false.

deploy:
  generate_types: true

puppet_path

The path to the puppet executable used for generating types. Defaults to /opt/puppetlabs/bin/puppet.

deploy:
  puppet_path: '/usr/local/bin/puppet'

puppet_conf

The path to the puppet.conf file used for generating types. Defaults to /etc/puppetlabs/puppet/puppet.conf.

deploy:
  puppet_conf: '/opt/puppet/conf/puppet.conf'

exclude_spec

During module deployment, r10k's default behavior is to delete the spec directory. Setting exclude_spec to true will deploy modules without their spec directory. This behavior can be configured for all modules using the exclude_spec setting in the r10k config. It can also be passed as a CLI argument for deploy environment/module, overriding the r10k config. Setting this per module in a Puppetfile will override the default, r10k config, and cli flag for that module. The following example sets all modules to not deploy the spec dir via the r10k config.

deploy:
  exclude_spec: true

Source options

The following options are respected by all source implementations. Sources may implement other options in addition to the ones listed below; see the source specific documentation for more information.

remote

The 'remote' setting specifies where the source repository should be fetched from. It may be any valid URL that the source may check out or clone. The remote must be able to be fetched without any interactive input, eg usernames or passwords cannot be prompted for in order to fetch the remote. We support the git, ssh, and https transport protocols. An SSH private key or access token must be provided for authentication. Only https may be used without authentication. See GitHub's blog on protocol security for more info.

---
sources:
  mysource:
    remote: 'https://git-server.site/my-org/main-modules'

basedir

The 'basedir' setting specifies where environments will be created for this source. This directory will be entirely managed by r10k and any contents that r10k did not put there will be removed.

---
sources:
  mysource:
    basedir: '/etc/puppet/environments'

If two different sources have the same basedir, it's possible for them to create two separate environments with the same name and file path. If this occurs r10k will treat this as a fatal error and will abort. To avoid this, use prefixing on one or both of the sources to make sure that all environment names are unique. See also the prefix setting.

prefix

The prefix setting allows environment names to be prefixed with the short name of the given source. This prevents collisions when multiple sources are deployed into the same directory.

---
sources:
  mysource:
    basedir: '/etc/puppet/environments'
    prefix: true # All environments will be prefixed with "mysource_"

prefix behaviour

  • if true environment folder will be prefixed with the name of the source.
  • if false (default) environment folder will not be prefixed
  • if String environment folder will be prefixed with the prefix value.

strip_component

The 'strip_component' setting allows parts of environment names from a source to have a transformation applied, removing a part of the name before turning them into Puppet environments. This is primarily useful for VCS sources (e.g. Git), because it allows branch names to use prefixes or organizing name components such as "env/production", "env/development", but deploy Puppet environments from these branches named without the leading "env/" component. E.g. "production", "development".

---
sources:
  mysource:
    basedir: '/etc/puppet/environments'
    strip_component: 'env/'

strip_component behaviour

  • if string environment names will have this prefix removed, if the prefix is present. Note that when string values are used, names can only have prefix components removed.
  • if /regex/ the regex will be matched against environment names and if a match is found, the matching name component will be removed.

ignore_branch_prefixes

The 'ignore_branch_prefixes' setting causes environments to be ignored which match in part or whole to any of the prefixes listed in the setting. The setting is a list of strings. Each branch in the 'git' repo will have its name tested against all prefixes and, if the prefix is found, then an environment will not be deployed for this branch. If no 'ignore_branch_prefixes' is specified, then all branches in the 'git' repo will be deployed (default behavior).

ignore_branch_prefixes behaviour

  • if empty, deploy environments for all branches
  • for each branch in git repo ** if branch.name has a prefix found in ignore_branch_prefixes, then do not deploy an environment for branch

Example: do not deploy branches with names starting with (or completely named) 'test' or 'dev'.

---
sources:
  mysource:
    basedir: '/etc/puppet/environments'
    ignore_branch_prefixes:
      - 'test'
      - 'dev'

filter_command

You can filter out any branch based on the result of the command specified as 'filter_command'. Currently it only works with git repository. Non zero return status of the command results in a branch beeing removed. The command is passed additional environment variables

  • GIT_DIR – path to the cached git repository
  • R10K_BRANCH – branch which is being filtered
  • R10K_NAME – source name from r10k configuration

This can be used for example for filtering out the branches with invalid gpg signature of their latest commit

---
sources:
  mysource:
    basedir: '/etc/puppet/environments'
    filter_command: 'git verify-commit $R10K_BRANCH 2> /dev/null'

Beware that if the production branch of manifests is filtered out, you will end up with empty environment.

Examples

Minimal example

The majority of users will only have a single repository where all modules and hiera data files are kept. In this case you will specify a single source:

---
sources:
  operations:
    remote: 'https://git-server.site/my-org/org-modules'
    basedir: '/etc/puppet/environments'

Separate hiera data

For more complex cases where you want to store hiera data in a different repository and your modules in another repository, you can specify two sources:

---
sources:
  operations:
    remote: 'https://git-server.site/my-org/org-modules'
    basedir: '/etc/puppet/environments'
  hiera:
    remote: 'https://git-server.site/my-org/org-hiera-data'
    basedir: '/etc/puppet/hiera-data'

Multiple tenancy

Alternately you may want to create separate environments from multiple repositories. This is useful when you want two groups to be able to deploy Puppet modules but they should only have write access to their own modules and not the modules of other groups.

---
sources:
  main:
    remote: 'https://git-server.site/my-org/main-modules'
    basedir: '/etc/puppet/environments'
    prefix: false # Prefix defaults to false so this is only here for clarity
  qa:
    remote: 'https://git-server.site/my-org/qa-puppet-modules'
    basedir: '/etc/puppet/environments'
    prefix: true
  dev:
    remote: 'https://git-server.site/my-org/dev-puppet-modules'
    basedir: '/etc/puppet/environments'
    prefix: true

This will create the following directory structure:

/etc/puppet/environments
|-- production       # main-modules repository, production branch
|-- upgrade_apache   # main-modules repository, upgrade_apache branch
|-- qa_production    # qa repository, production branch
|-- qa_jenkins_test  # qa repository, jenkins_test branch
|-- dev_production   # dev repository, production branch
`-- dev_loadtest     # dev repository, loadtest branch

Multiple tenancy with external hieradata

If hiera data is in a separate repository from your control repository, you must override the prefix so environment folders line up in both directories:

---
sources:
  app1_data:
    remote: 'https://git-server.site/my-org/app1-hieradata'
    basedir: '/etc/puppet/hieradata'
    prefix: "app1"
  app1_modules:
    remote: 'https://git-server.site/my-org/app1-puppet-modules'
    basedir: '/etc/puppet/environments'
    prefix: "app1"

This will create the following directory structure:

/etc/puppet/environments
|-- app1_production  # app1 modules repository, production branch
|-- app1_develop     # app1 modules repository, develop branch

/etc/puppet/hieradata
|-- app1_production  # app1 data repository, production branch
|-- app1_develop     # app1 data repository, develop branch

Experimental Features

YAML Environment Source

Dynamically deploying Puppet content based on the state of version control repositories can be powerful and efficient for development workflows. The linkage however is not advantageous when trying to build precision controls over deployment of previously-developed and tested content.

The YAML environment source type allows for a clear separation of tooling between development workflow, and deployment workflow. Development workflow creates new commits in the version control system. Deployment workflow consumes them.

To use the YAML environment source, configure r10k's sources with at least one entry using the yaml type.

# r10k.yaml
---
sources:
  puppet:
    type: yaml
    basedir: /etc/puppetlabs/code/environments
    config: /etc/puppetlabs/r10k/environments.yaml # default

When using the YAML source type, every environment is enumerated in a single yaml file. Each environment specifies a type, source, and version (typically a Git ref) to deploy. In the following example, two environments are defined, which are identical to each other.

---
production:
  type: git
  source: [email protected]:puppetlabs/control-repo.git
  version: 8820892

development:
  type: git
  source: [email protected]:puppetlabs/control-repo.git
  version: 8820892

YAMLdir Environment Source

Like the YAML environment source, but implemented as a conf.d pattern.

# r10k.yaml
---
sources:
  puppet:
    type: yamldir
    basedir: /etc/puppetlabs/code/environments
    config: /etc/puppetlabs/r10k/environments.d # default

Each environment is defined in a yaml file placed in the configuration directory. The filename, without the .yaml extension, will be the name of the environment.

/etc/puppetlabs/r10k/environments.d
├── production.yaml
└── development.yaml

The contents of the file should be a hash specifying the enviornment type, and all other applicable environment options.

# production.yaml
---
type: git
source: [email protected]:puppetlabs/control-repo.git
version: 8820892

Exec environment Source

The exec environment source runs an external command which is expected to return on stdout content compatible with the YAML environment source data format. The command may return the data in JSON or YAML form. The exec environment source is similar in purpose to Puppet's exec node terminus, used to implement external node classifiers (ENCs). R10k's exec source type allows the the implementation of external environment sources.

# r10k.yaml
---
sources:
  puppet:
    type: exec
    basedir: /etc/puppetlabs/code/environments
    command: /usr/local/bin/r10k-environments.sh

Environment Modules

The environment modules feature allows module content to be attached to an environment at environment definition time. This happens before modules specified in a Puppetfile are attached to an environment, which does not happen until deploy time. Environment module implementation depends on the environment source type.

For the YAML environment source type, attach modules to an environment by specifying a modules key for the environment, and providing a hash of modules to attach. Each module accepts the same arguments accepted by the mod method in a Puppetfile. For ease of reading and consistency, however, it is perferred to use the generic type, source, and version options over implementation-specific formats and options such as "ref" and "git".

The example below includes two Forge modules and one module sourced from a Git repository. The two environments are almost identical. However, a new version of the stdlib module has been deployed in development (6.2.0), that has not yet been deployed to production.

---
production:
  type: git
  source: [email protected]:puppetlabs/control-repo.git
  version: 8820892
  modules:
    puppetlabs-stdlib:
      type: forge
      version: 6.0.0
    puppetlabs-concat:
      type: forge
      version: 6.1.0
    reidmv-xampl:
      type: git
      source: https://github.com/reidmv/reidmv-xampl.git
      version: 62d07f2

development:
  type: git
  source: [email protected]:puppetlabs/control-repo.git
  version: 8820892
  modules:
    puppetlabs-stdlib:
      type: forge
      version: 6.2.0
    puppetlabs-concat:
      type: forge
      version: 6.1.0
    reidmv-xampl:
      type: git
      source: https://github.com/reidmv/reidmv-xampl.git
      version: 62d07f2

An example of a single environment definition for the YAMLdir environment source type:

# production.yaml
---
type: git
source: [email protected]:puppetlabs/control-repo.git
version: 8820892
modules:
  puppetlabs-stdlib:
    type: forge
    version: 6.0.0
  puppetlabs-concat:
    type: forge
    version: 6.1.0
  reidmv-xampl:
    type: git
    source: https://github.com/reidmv/reidmv-xampl.git
    version: 62d07f2

Puppetfile module conflicts

When a module is defined in an environment and also in a Puppetfile, the default behavior is for the environment definition of the module to take precedence, a warning to be logged, and the Puppetfile definition to be ignored. The behavior is configurable to optionally skip the warning, or allow a hard failure instead. Use the module_conflicts option in an environment definition to control this.

Available module_conflicts options:

  • override_and_warn (default): the version of the module defined by the environment will be used, and the version defined in the Puppetfile will be ignored. A warning will be printed.
  • override: the version of the module defined by the environment will be used, and the version defined in the Puppetfile will be ignored.
  • error: an error will be raised alerting the user to the conflict. The environment will not be deployed.
# production.yaml
---
type: git
source: [email protected]:puppetlabs/control-repo.git
version: 8820892
module_conflicts: override_and_warn
modules:
  puppetlabs-stdlib:
    type: forge
    version: 6.0.0
  puppetlabs-concat:
    type: forge
    version: 6.1.0
  reidmv-xampl:
    type: git
    source: https://github.com/reidmv/reidmv-xampl.git
    version: 62d07f2

Plain Environment Type

A "control repository" typically contains a hiera.yaml, an environment.conf, a manifests/site.pp file, and a few other things. However, none of these are strictly necessary for an environment to be functional if modules can be deployed to it.

The plain environment type allows sources that support environment modules to operate without a control repo being required. Modules can be deployed directly.

---
production:
  type: plain
  modules:
    puppetlabs-stdlib:
      type: forge
      version: 6.0.0
    puppetlabs-concat:
      type: forge
      version: 6.1.0
    reidmv-xampl:
      type: git
      source: https://github.com/reidmv/reidmv-xampl.git
      version: 62d07f2

development:
  type: plain
  modules:
    puppetlabs-stdlib:
      type: forge
      version: 6.0.0
    puppetlabs-concat:
      type: forge
      version: 6.1.0
    reidmv-xampl:
      type: git
      source: https://github.com/reidmv/reidmv-xampl.git
      version: 62d07f2

Tarball Environment Type

The tarball environment type allows an environment to be deployed from a tarball archive, rather than a Git repository. When using a tarball environment type, a source location for the tarball is required. Optionally, the tarball's sha256 checksum may be specified as the version. It is highly recommended to include a version specifier. If a version specifier is not included, r10k will never invalidate a cached copy of the tarball's source.

Tarball environment sources will be unpacked directly into the environment root.

---
production:
  type: tarball
  source: https://repo.example.com/projects/puppet/env-2.36.1.tar.gz
  version: 99a906c99c2f144de43f2ae500509a7474ed11c583fb623efa8e5b377a3157f0 # sha256digest

development:
  type: tarball
  source: https://repo.example.com/projects/puppet/env-6128ada.tar.gz
  version: 6128ada158622cd90f8e1360fb7c2c3830a812d1ec26ddf0db7eb16d61b7293f # sha256digest
  modules:
    reidmv-xampl:
      type: git
      source: https://github.com/reidmv/reidmv-xampl.git
      version: 62d07f2