Project not available anymore on PCBWay

[acabrol]

Hello everyone i try to buy the project on PCBWay but it doesn't seem to exist anymore.

Where can I buy a pre-built version or a DIY kit?

[philippe44]

I don't have spare boards anymore but I will probably do a next batch in the few coming months

[emlynmac]

I put the gerber files into pcbway and got 5 boards made up for the boost.
I'm awaiting arrival of the boards. If they're good and you want one, I can send you one.

[emlynmac]

@acabrol My boards arrived; they look good. Let me know if you'd like one (DM me)

[Muehsal]

Hi there,

I have ordered the normal version with the Gerber files (labeled 3.20 in the repro) and a modified bom & picknplace (also from the repro) without charger and spdif from PCBWay. The SqueezeAmps work perfectly out of the Box (after flashing). I have chosen the TAS5756 as it was much cheaper

Thank you very much Philippe for sharing the design!

One small note: the silk screen of the 3.20 Gerber states a version 3.11. The diptrace file, however, has a silk screen with 3.20.

[Muehsal]

[philippe44]

Looks good!

[joffito]

If anybody got any board (populated / unpopulated) left, i'd happily buy one. cheers and thanks for sharing this great project :)

[philippe44]

I have plenty of PCBs

[joffito]

Sounds good :-) How to buy one / contact you? I think the DM message feature is not available in Github?

[philippe44]

Go on the Logitech media server forum, there is a thread on 3rd party HW about SqueezeAMP and you can contact me from there. These PCB cost nothing so it's just about putting one in an envelope

[acabrol]

@acabrol My boards arrived; they look good. Let me know if you'd like one (DM me)

Can you post the updated link to PCBway?

I think i could insert the squeezeamp esp32 in this DIY kit:
https://a.aliexpress.com/_EQdlhwn

[agdamsbo]

Hi there,

I have ordered the normal version with the Gerber files (labeled 3.20 in the repro) and a modified bom & picknplace (also from the repro) without charger and spdif from PCBWay. The SqueezeAmps work perfectly out of the Box (after flashing). I have chosen the TAS5756 as it was much cheaper

Thank you very much Philippe for sharing the design!

One small note: the silk screen of the 3.20 Gerber states a version 3.11. The diptrace file, however, has a silk screen with 3.20.

@Muehsal Would you be willing to share your modified files? Ive had some troubles with PCBway, but would very much like to try my hands with a board just like the one I see you have ordered.

[Muehsal]

Hi there,
I have ordered the normal version with the Gerber files (labeled 3.20 in the repro) and a modified bom & picknplace (also from the repro) without charger and spdif from PCBWay. The SqueezeAmps work perfectly out of the Box (after flashing). I have chosen the TAS5756 as it was much cheaper
Thank you very much Philippe for sharing the design!
One small note: the silk screen of the 3.20 Gerber states a version 3.11. The diptrace file, however, has a silk screen with 3.20.

@Muehsal Would you be willing to share your modified files? Ive had some troubles with PCBway, but would very much like to try my hands with a board just like the one I see you have ordered.

I have sent you an email 🙂

[timotoots]

Hi there,
I have ordered the normal version with the Gerber files (labeled 3.20 in the repro) and a modified bom & picknplace (also from the repro) without charger and spdif from PCBWay. The SqueezeAmps work perfectly out of the Box (after flashing). I have chosen the TAS5756 as it was much cheaper
Thank you very much Philippe for sharing the design!
One small note: the silk screen of the 3.20 Gerber states a version 3.11. The diptrace file, however, has a silk screen with 3.20.

@Muehsal Would you be willing to share your modified files? Ive had some troubles with PCBway, but would very much like to try my hands with a board just like the one I see you have ordered.

I have sent you an email 🙂

I would also be interested in your version. Could you send me this as well? Thanks!

[emlynmac]

I have plenty of PCBs

Do you still have any left?
I have a workshop I'm going to run on SMD and I'd like to have a board to be able to stencil on.

[philippe44]

Yes I do