README.md

OTLP Exporter for OpenTelemetry .NET

The OTLP (OpenTelemetry Protocol) exporter implementation.

Table of Contents

• Installation
• Enable Log Exporter
• Enable Metric Exporter
• Enable Trace Exporter
• Enable OTLP Exporter for all signals
• Configuration
  • OtlpExporterOptions
  • LogRecordExportProcessorOptions
  • MetricReaderOptions
  • Environment Variables
    • Exporter configuration
    • Attribute limits
  • Configure HttpClient
• Experimental features
• Troubleshooting

Prerequisite

• An endpoint capable of accepting OTLP, like OpenTelemetry Collector or similar.

Installation

dotnet add package OpenTelemetry.Exporter.OpenTelemetryProtocol

Enable Log Exporter

var loggerFactory = LoggerFactory.Create(builder =>
{
    builder.AddOpenTelemetry(options =>
    {
        options.AddOtlpExporter();
    });
});

By default, AddOtlpExporter() pairs the OTLP Log Exporter with a batching processor. See TestLogs.cs for example on how to customize the LogRecordExportProcessorOptions or see the Environment Variables section below on how to customize using environment variables.

Note

For details on how to configure logging with OpenTelemetry check the Console or ASP.NET Core tutorial.

ILogger Scopes: OTLP Log Exporter supports exporting ILogger scopes as Attributes. Scopes must be enabled at the SDK level using IncludeScopes setting on OpenTelemetryLoggerOptions.

Note

Scope attributes with key set as empty string or {OriginalFormat} are ignored by exporter. Duplicate keys are exported as is.

Enable Metric Exporter

This exporter provides AddOtlpExporter() extension method on MeterProviderBuilder to enable exporting of metrics. The following snippet adds the Exporter with default configuration.

var meterProvider = Sdk.CreateMeterProviderBuilder()
    // rest of config not shown here.
    .AddOtlpExporter()
    .Build();

By default, AddOtlpExporter() pairs the OTLP MetricExporter with a PeriodicExportingMetricReader with metric export interval of 60 secs and Temporality set as Cumulative. See TestMetrics.cs for example on how to customize the MetricReaderOptions or see the Environment Variables section below on how to customize using environment variables.

Enable Trace Exporter

This exporter provides AddOtlpExporter() extension method on TracerProviderBuilder to enable exporting of traces. The following snippet adds the Exporter with default configuration.

var tracerProvider = Sdk.CreateTracerProviderBuilder()
    // rest of config not shown here.
    .AddOtlpExporter()
    .Build();

See the TestOtlpExporter.cs for runnable example.

Enable OTLP Exporter for all signals

Starting with the 1.8.0-beta.1 version you can use the cross-cutting UseOtlpExporter extension to simplify registration of the OTLP exporter for all signals (logs, metrics, and traces).

Note

The cross cutting extension is currently only available when using the AddOpenTelemetry extension in the OpenTelemetry.Extensions.Hosting package.

appBuilder.Services.AddOpenTelemetry()
    .UseOtlpExporter();

The UseOtlpExporter has the following behaviors:

• Calling UseOtlpExporter automatically enables logging, metrics, and tracing however only telemetry which has been enabled will be exported.

  There are different mechanisms available to enable telemetry:

  • Logging

    ILogger telemetry is controlled by category filters typically set through configuration. For details see: Log Filtering and Logging in .NET.

  • Metrics

    Metrics telemetry is controlled by calling MeterProviderBuilder.AddMeter to listen to Meters emitting metrics. Typically instrumentation packages will make this call automatically.

    Examples:

    appBuilder.Services.AddOpenTelemetry()
        .UseOtlpExporter()
        .WithMetrics(metrics => metrics
            .AddMeter(MyMeter.Name) // Listen to custom telemetry
            .AddAspNetCoreInstrumentation() // Use instrumentation to listen to telemetry
        );

    appBuilder.Services.ConfigureOpenTelemetryMeterProvider(metrics => metrics
        .AddMeter(MyMeter.Name) // Listen to custom telemetry
        .AddAspNetCoreInstrumentation() // Use instrumentation to listen to telemetry
    );
    
    appBuilder.Services.AddOpenTelemetry()
        .UseOtlpExporter();

    For details see: Meter.

    When using Microsoft.Extensions.Hosting v8.0.0 or greater (a standard part of ASP.NET Core) Meters and Instruments can also be enabled using configuration.

    appSettings.json metrics configuration example:

    {
      "Metrics": {
        "EnabledMetrics": {
          "Microsoft.AspNetCore.*": true,
          "System.*": true,
          "MyCompany.*": true,
        }
      }
    }

    For details about the built-in metrics exposed by .NET see: Built-in metrics in .NET.

  • Tracing

    Trace telemetry is controlled by calling TracerProviderBuilder.AddSource to listen to ActivitySources emitting traces. Typically instrumentation packages will make this call automatically.

    Examples:

    appBuilder.Services.AddOpenTelemetry()
        .UseOtlpExporter()
        .WithTracing(tracing => tracing
            .AddSource(MyActivitySource.Name) // Listen to custom telemetry
            .AddAspNetCoreInstrumentation() // Use instrumentation to listen to telemetry
        );

    appBuilder.Services.ConfigureOpenTelemetryTracerProvider(tracing => tracing
        .AddSource(MyActivitySource.Name) // Listen to custom telemetry
        .AddAspNetCoreInstrumentation() // Use instrumentation to listen to telemetry
    );
    
    appBuilder.Services.AddOpenTelemetry()
        .UseOtlpExporter();

    For details see: Activity Source.

• The exporter registered by UseOtlpExporter will be added as the last processor in the pipeline established for logging and tracing.

• UseOtlpExporter can only be called once. Subsequent calls will result in a NotSupportedException being thrown.

• UseOtlpExporter cannot be called in addition to signal-specific AddOtlpExporter methods. If UseOtlpExporter is called signal-specific AddOtlpExporter calls will result in a NotSupportedException being thrown.

Configuring signals when using UseOtlpExporter

UseOtlpExporter supports the full set of environment variables listed below including the signal-specific overrides and users are encouraged to use this mechanism to configure their exporters.

A UseOtlpExporter overload is provided which may be used to set the protocol and base URL:

appBuilder.Services.AddOpenTelemetry()
    .UseOtlpExporter(OtlpExportProtocol.HttpProtobuf, new Uri("http://localhost:4318/"));

Note

When the protocol is set to OtlpExportProtocol.HttpProtobuf a signal-specific path will be appended automatically to the base URL when constructing exporters.

Configuration

You can configure the OtlpExporter through OtlpExporterOptions and environment variables.

Note

The OtlpExporterOptions type setters take precedence over the environment variables.

This can be achieved by providing an Action<OtlpExporterOptions> delegate to the AddOtlpExporter() method or using the Configure<OtlpExporterOptions>() Options API extension:

// Set via delegate using code:
appBuilder.Services.AddOpenTelemetry()
    .WithTracing(builder => builder.AddOtlpExporter(o => {
        // ...
    }));

// Set via Options API using code:
appBuilder.Services.Configure<OtlpExporterOptions>(o => {
    // ...
});

// Set via Options API using configuration:
appBuilder.Services.Configure<OtlpExporterOptions>(
    appBuilder.Configuration.GetSection("OpenTelemetry:otlp"));

If additional services from the dependency injection are required for configuration they can be accessed through the Options API like this:

// Step 1: Register user-created configuration service.
appBuilder.Services.AddSingleton<MyOtlpConfigurationService>();

// Step 2: Use Options API to configure OtlpExporterOptions with user-created service.
appBuilder.Services.AddOptions<OtlpExporterOptions>()
    .Configure<MyOtlpConfigurationService>((o, configService) => {
        o.Endpoint = configService.ResolveOtlpExporterEndpoint();
    });

Note

The OtlpExporterOptions class is shared by logging, metrics, and tracing. To bind configuration specific to each signal use the name parameter on the AddOtlpExporter extensions:

// Step 1: Bind options to config using the name parameter.
appBuilder.Services.Configure<OtlpExporterOptions>("tracing", appBuilder.Configuration.GetSection("OpenTelemetry:tracing:otlp"));
appBuilder.Services.Configure<OtlpExporterOptions>("metrics", appBuilder.Configuration.GetSection("OpenTelemetry:metrics:otlp"));
appBuilder.Services.Configure<OtlpExporterOptions>("logging", appBuilder.Configuration.GetSection("OpenTelemetry:logging:otlp"));

// Step 2: Register OtlpExporter using the name parameter.
appBuilder.Services.AddOpenTelemetry()
    .WithTracing(builder => builder.AddOtlpExporter("tracing", configure: null))
    .WithMetrics(builder => builder.AddOtlpExporter("metrics", configure: null));

appBuilder.Logging.AddOpenTelemetry(builder => builder.AddOtlpExporter(
    "logging",
    options =>
    {
        // Note: Options can also be set via code but order is important. In the example here the code will apply after configuration.
        options.Endpoint = new Uri("http://localhost/logs");
    }));

OtlpExporterOptions

• Protocol: OTLP transport protocol. Supported values: OtlpExportProtocol.Grpc and OtlpExportProtocol.HttpProtobuf. The default is OtlpExportProtocol.Grpc.

• Endpoint: Target to which the exporter is going to send traces or metrics. The endpoint must be a valid Uri with scheme (http or https) and host, and MAY contain a port and path. The default is "localhost:4317" for OtlpExportProtocol.Grpc and "localhost:4318" for OtlpExportProtocol.HttpProtobuf.

Note

When using OtlpExportProtocol.HttpProtobuf, the full URL MUST be provided, including the signal-specific path v1/{signal}. For example, for traces, the full URL will look like http://your-custom-endpoint/v1/traces.

• Headers: Optional headers for the connection.

• HttpClientFactory: A factory function called to create the HttpClient instance that will be used at runtime to transmit telemetry over HTTP when the HttpProtobuf protocol is configured. See Configure HttpClient for more details.

• TimeoutMilliseconds : Max waiting time for the backend to process a batch.

The following options are only applicable to OtlpTraceExporter:

• ExportProcessorType: Whether the exporter should use Batch or Simple exporting processor. The default is Batch.

• BatchExportProcessorOptions: Configuration options for the batch exporter. Only used if ExportProcessorType is set to Batch.

See the TestOtlpExporter.cs for an example of how to use the exporter.

LogRecordExportProcessorOptions

The LogRecordExportProcessorOptions class may be used to configure processor & batch settings for logging:

// Set via delegate using code:
appBuilder.Logging.AddOpenTelemetry(options =>
{
    options.AddOtlpExporter((exporterOptions, processorOptions) =>
    {
        processorOptions.BatchExportProcessorOptions.ScheduledDelayMilliseconds = 2000;
        processorOptions.BatchExportProcessorOptions.MaxExportBatchSize = 5000;
    });
});

// Set via Options API using code:
appBuilder.Services.Configure<LogRecordExportProcessorOptions>(o =>
{
    o.BatchExportProcessorOptions.ScheduledDelayMilliseconds = 2000;
    o.BatchExportProcessorOptions.MaxExportBatchSize = 5000;
});

// Set via Options API using configuration:
appBuilder.Services.Configure<LogRecordExportProcessorOptions>(
    appBuilder.Configuration.GetSection("OpenTelemetry:Logging"));

MetricReaderOptions

The MetricReaderOptions class may be used to configure reader settings for metrics:

// Set via delegate using code:
appBuilder.Services.AddOpenTelemetry()
    .WithMetrics(builder => builder.AddOtlpExporter((exporterOptions, readerOptions) =>
    {
        readerOptions.PeriodicExportingMetricReaderOptions.ExportIntervalMilliseconds = 10_000;
    }));

// Set via Options API using code:
appBuilder.Services.Configure<MetricReaderOptions>(o =>
{
    o.PeriodicExportingMetricReaderOptions.ExportIntervalMilliseconds = 10_000;
});

// Set via Options API using configuration:
appBuilder.Services.Configure<MetricReaderOptions>(
    appBuilder.Configuration.GetSection("OpenTelemetry:Metrics"));

Environment Variables

The following environment variables can be used to configure the OTLP Exporter for logs, traces, and metrics.

Note

In OpenTelemetry .NET environment variable keys are retrieved using IConfiguration which means they may be set using other mechanisms such as defined in appSettings.json or specified on the command-line.

Exporter configuration

The OpenTelemetry Specification defines environment variables which can be used to configure the OTLP exporter and its associated processor (logs & traces) or reader (metrics).

• All signals

  The following environment variables can be used to override the default values of the OtlpExporterOptions:

  Environment variable	OtlpExporterOptions property
  OTEL_EXPORTER_OTLP_ENDPOINT	Endpoint
  OTEL_EXPORTER_OTLP_HEADERS	Headers
  OTEL_EXPORTER_OTLP_TIMEOUT	TimeoutMilliseconds
  OTEL_EXPORTER_OTLP_PROTOCOL	Protocol (grpc or http/protobuf)

• Logs:

  The following environment variables can be used to override the default values for the batch processor configured for logging:

  Environment variable	BatchExportLogRecordProcessorOptions property
  OTEL_BLRP_SCHEDULE_DELAY	ScheduledDelayMilliseconds
  OTEL_BLRP_EXPORT_TIMEOUT	ExporterTimeoutMilliseconds
  OTEL_BLRP_MAX_QUEUE_SIZE	MaxQueueSize
  OTEL_BLRP_MAX_EXPORT_BATCH_SIZE	MaxExportBatchSize

  The following environment variables can be used to override the default values of the OtlpExporterOptions used for logging when using the UseOtlpExporter extension:

  Environment variable	OtlpExporterOptions property	UseOtlpExporter	AddOtlpExporter
  OTEL_EXPORTER_OTLP_LOGS_ENDPOINT	Endpoint	Supported	Not supported
  OTEL_EXPORTER_OTLP_LOGS_HEADERS	Headers	Supported	Not supported
  OTEL_EXPORTER_OTLP_LOGS_TIMEOUT	TimeoutMilliseconds	Supported	Not supported
  OTEL_EXPORTER_OTLP_LOGS_PROTOCOL	Protocol (grpc or http/protobuf)	Supported	Not supported

• Metrics:

  The following environment variables can be used to override the default value of the TemporalityPreference setting for the reader configured for metrics when using OTLP exporter:

  Environment variable	MetricReaderOptions property
  OTEL_EXPORTER_OTLP_METRICS_TEMPORALITY_PREFERENCE	TemporalityPreference

  The following environment variables can be used to override the default values of the periodic exporting metric reader configured for metrics:

  Environment variable	PeriodicExportingMetricReaderOptions property
  OTEL_METRIC_EXPORT_INTERVAL	ExportIntervalMilliseconds
  OTEL_METRIC_EXPORT_TIMEOUT	ExportTimeoutMilliseconds

  The following environment variables can be used to override the default values of the OtlpExporterOptions used for metrics when using the UseOtlpExporter extension:

  Environment variable	OtlpExporterOptions property	UseOtlpExporter	AddOtlpExporter
  OTEL_EXPORTER_OTLP_METRICS_ENDPOINT	Endpoint	Supported	Not supported
  OTEL_EXPORTER_OTLP_METRICS_HEADERS	Headers	Supported	Not supported
  OTEL_EXPORTER_OTLP_METRICS_TIMEOUT	TimeoutMilliseconds	Supported	Not supported
  OTEL_EXPORTER_OTLP_METRICS_PROTOCOL	Protocol (grpc or http/protobuf)	Supported	Not supported

• Tracing:

  The following environment variables can be used to override the default values for the batch processor configured for tracing:

  Environment variable	BatchExportActivityProcessorOptions property
  OTEL_BSP_SCHEDULE_DELAY	ScheduledDelayMilliseconds
  OTEL_BSP_EXPORT_TIMEOUT	ExporterTimeoutMilliseconds
  OTEL_BSP_MAX_QUEUE_SIZE	MaxQueueSize
  OTEL_BSP_MAX_EXPORT_BATCH_SIZE	MaxExportBatchSize

  The following environment variables can be used to override the default values of the OtlpExporterOptions used for tracing when using the UseOtlpExporter extension:

  Environment variable	OtlpExporterOptions property	UseOtlpExporter	AddOtlpExporter
  OTEL_EXPORTER_OTLP_TRACES_ENDPOINT	Endpoint	Supported	Not supported
  OTEL_EXPORTER_OTLP_TRACES_HEADERS	Headers	Supported	Not supported
  OTEL_EXPORTER_OTLP_TRACES_TIMEOUT	TimeoutMilliseconds	Supported	Not supported
  OTEL_EXPORTER_OTLP_TRACES_PROTOCOL	Protocol (grpc or http/protobuf)	Supported	Not supported

Attribute limits

The OpenTelemetry Specification defines environment variables which can be used to configure attribute limits.

The following environment variables can be used to configure default attribute limits:

• OTEL_ATTRIBUTE_VALUE_LENGTH_LIMIT
• OTEL_ATTRIBUTE_COUNT_LIMIT

The following environment variables can be used to configure span limits used for tracing:

• OTEL_SPAN_ATTRIBUTE_VALUE_LENGTH_LIMIT
• OTEL_SPAN_ATTRIBUTE_COUNT_LIMIT
• OTEL_SPAN_EVENT_COUNT_LIMIT
• OTEL_SPAN_LINK_COUNT_LIMIT
• OTEL_EVENT_ATTRIBUTE_COUNT_LIMIT
• OTEL_LINK_ATTRIBUTE_COUNT_LIMIT

The following environment variables can be used to configure log record limits used for logging:

• OTEL_LOGRECORD_ATTRIBUTE_VALUE_LENGTH_LIMIT
• OTEL_LOGRECORD_ATTRIBUTE_COUNT_LIMIT

Configure HttpClient

The HttpClientFactory option is provided on OtlpExporterOptions for users who want to configure the HttpClient used by the OtlpTraceExporter, OtlpMetricExporter, and/or OtlpLogExporter when HttpProtobuf protocol is used. Simply replace the function with your own implementation if you want to customize the generated HttpClient:

Note

The HttpClient instance returned by the HttpClientFactory function is used for all export requests.

services.AddOpenTelemetry()
    .WithTracing(builder => builder
        .AddOtlpExporter(o =>
        {
            o.Protocol = OtlpExportProtocol.HttpProtobuf;
            o.HttpClientFactory = () =>
            {
                HttpClient client = new HttpClient();
                client.DefaultRequestHeaders.Add("X-MyCustomHeader", "value");
                return client;
            };
        }));

Note

DefaultRequestHeaders can be used for HTTP Basic Access Authentication. For more complex authentication requirements, System.Net.Http.DelegatingHandler can be used to handle token refresh, as explained here.

For users using IHttpClientFactory you may also customize the named "OtlpTraceExporter" and/or "OtlpMetricExporter" HttpClient using the built-in AddHttpClient extension:

services.AddHttpClient(
    "OtlpTraceExporter",
    configureClient: (client) =>
        client.DefaultRequestHeaders.Add("X-MyCustomHeader", "value"));

Note

IHttpClientFactory is NOT currently supported by OtlpLogExporter.

Experimental features

The following features are exposed experimentally in the OTLP Exporter. Features are exposed experimentally when either the OpenTelemetry Specification has explicitly marked something experimental or when the SIG members are still working through the design for a feature and want to solicit feedback from the community.

Environment variables

Note

In OpenTelemetry .NET environment variable keys are retrieved using IConfiguration which means they may be set using other mechanisms such as defined in appSettings.json or specified on the command-line.

• All signals

  • OTEL_DOTNET_EXPERIMENTAL_OTLP_RETRY

    • When set to in_memory, it enables in-memory retry for transient errors encountered while sending telemetry.

      Added in 1.8.0.

    • When set to disk, it enables retries by storing telemetry on disk during transient errors. The default path where the telemetry is stored is obtained by calling Path.GetTempPath() or can be customized by setting OTEL_DOTNET_EXPERIMENTAL_OTLP_DISK_RETRY_DIRECTORY_PATH environment variable.

      The OTLP exporter utilizes a forked version of the OpenTelemetry.PersistentStorage.FileSystem library to store telemetry data on disk. When a transient failure occurs, a file is created at the specified directory path on disk containing the serialized request data that was attempted to be sent to the OTLP ingestion. A background thread attempts to resend any offline stored telemetry every 60 seconds. For more details on how these files are managed on disk, refer to the File details.

      Added in TBD (Unreleased).

• Logs

  • OTEL_DOTNET_EXPERIMENTAL_OTLP_EMIT_EVENT_LOG_ATTRIBUTES

    When set to true, it enables export of LogRecord.EventId.Id as logrecord.event.id and LogRecord.EventId.Name as logrecord.event.name.

    Added in 1.7.0-alpha.1.

Troubleshooting

This component uses an EventSource with the name "OpenTelemetry-Exporter-OpenTelemetryProtocol" for its internal logging. Please refer to SDK troubleshooting for instructions on seeing these internal logs.

References

• OpenTelemetry Collector
• OpenTelemetry Project
• OTLP proto files