We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Tuner type : M1502A DVB-S/S2 tested on openatv 7.4 full dmesg:
Booting Linux on physical CPU 0x0 Linux version 4.4.35 ([email protected]) (gcc version 13.2.0 (GCC) ) #1 SMP Wed Jun 29 13:36:49 UTC 2022 CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache initmrd: found no initmrd. Machine model: Hisilicon cma: Reserved 56 MiB at 0x75800000 cma: Reserved 4 MiB at 0x7a400000 Memory policy: Data cache writealloc -------------Fixed IO Mapping---------- Virt, Phys, Size 0xF9000000, 0xF8000000, 0x02000000 -------------------------------------- On node 0 totalpages: 502016 free_area_init_node: node 0, pgdat c0c2db80, node_mem_map df4a1000 Normal zone: 1032 pages used for memmap Normal zone: 0 pages reserved Normal zone: 132096 pages, LIFO batch:31 HighMem zone: 369920 pages, LIFO batch:31 PERCPU: Embedded 13 pages/cpu @df458000 s22604 r8192 d22452 u53248 pcpu-alloc: s22604 r8192 d22452 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 500984 Kernel command line: console=ttyAMA0,115200 root=/dev/mmcblk0p30 rootsubdir=linuxrootfs1 rootfstype=ext4 kernel=/dev/mmcblk0p26 userdataroot=/dev/mmcblk0p30 userdatasubdir=userdata1 wait blkdevparts=mmcblk0:1M(fastboot),512K(bootargs),512K(bootargsbak),20M(recovery),2M(deviceinfo),8M(securestore),8M(baseparam),8M(pqparam),2M(dtbo),10M(logo),10M(logobak),20M(fastplay),20M(recoverybak),60M(boot),20M(misc),20M(trustedcore),1700M(system),796M(cache),400M(vendor),50M(private),1M(unuse),1M(flag),4M(softwareinfo),4M(loaderdb),32M(loader),16M(linuxkernel1),16M(linuxkernel2),16M(linuxkernel3),16M(linuxkernel4),6968M(rootfs),-(userdata) coherent_pool=2M mem=1961M mmz=ddr,0,0,56M vmalloc=500M MACHINEBUILD=dual OEM=dags MODEL=dual log_buf_len individual max cpu contribution: 4096 bytes log_buf_len total cpu_extra contributions: 12288 bytes log_buf_len min size: 16384 bytes log_buf_len: 32768 bytes early log buf free: 13984(85%) PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 1905024K/2008064K available (8372K kernel code, 737K rwdata, 2248K rodata, 560K init, 526K bss, 41600K reserved, 61440K cma-reserved, 1406192K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) lowmem : 0xc0000000 - 0xe0400000 ( 516 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbec00000 - 0xbfe00000 ( 18 MB) .text : 0xc0008000 - 0xc08353cc (8373 kB) .init : 0xc0b06000 - 0xc0b92000 ( 560 kB) .data : 0xc0b92000 - 0xc0c4a684 ( 738 kB) .bss : 0xc0c4c000 - 0xc0ccf848 ( 527 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. NR_IRQS:352 clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns Console: colour dummy device 80x30 Calibrating delay loop... 3170.30 BogoMIPS (lpj=1585152) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok ftrace: allocating 27231 entries in 80 pages CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x8280 - 0x82d8 CPU: hi3798mv200 CPU1: powerup CPU1: update cpu_capacity 1024 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: powerup CPU2: update cpu_capacity 1024 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: powerup CPU3: update cpu_capacity 1024 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 Brought up 4 CPUs SMP: Total of 4 processors activated (12681.21 BogoMIPS). CPU: All CPU(s) started in SVC mode. CPU3: update max cpu_capacity 1024 devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns PCIe read alloc area phyaddr 08 size 00000000 PCIe write alloc area phyaddr 08 size 00000000 NET: Registered protocol family 16 CPU2: update max cpu_capacity 1024 DMA: preallocated 2048 KiB pool for atomic coherent allocations hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. Serial: AMBA PL011 UART driver f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 25, base_baud = 0) is a PL011 rev2 console [ttyAMA0] enabled f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 26, base_baud = 0) is a PL011 rev2 f8b03000.uart: ttyAMA2 at MMIO 0xf8b03000 (irq = 27, base_baud = 0) is a PL011 rev2 pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered hisilicon-pcie: probe of f0001000.pcie failed with error -1 hisi_iommu_ptable_addr:phy 0x1e000000 size:0x400000 hisi_iommu_err_rdaddr :phy 0x1ee7b600 size:0x200 hisi_iommu_err_wraddr :phy 0x1ee7b800 size:0x200 in hisi_iommu_domain_init start in hisi_iommu_domain_init end vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022 ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000 spi_master spi0: will run message pump with realtime priority usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.21 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized clocksource: Switched to clocksource hisp804 FS-Cache: Loaded NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 NetWinder Floating Point Emulator V0.97 (double precision) hw perfevents: enabled with armv7_cortex_a17 PMU driver, 7 counters available futex hash table entries: 1024 (order: 4, 65536 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... Installing knfsd (copyright (C) 1996 [email protected]). FS-Cache: Netfs 'cifs' registered for caching jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.23) yaffs: yaffs built Installing. bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered hiahci-phy: registered new sata phy driver brd: module loaded loop: module loaded hifmc100: registerd new interface driver hifmc100. hifmc100: Found flash memory controller hifmc100. hifmc100: no found spi-nor device. hifmc100: no found nand device. hifmc100: no found spi-nand device. hi_eth: /soc/hieth@f9c30000/hieth_phy@0 has invalid PHY address libphy: himii: probed mdio_bus f9c30000.hieth: /soc/hieth@f9c30000/hieth_phy@0 PHY address 255 is too large hi_eth: no dev probed! libphy: higmac_mii_bus: probed attached PHY 3 to driver Generic PHY, PHY_ID=0x1cc916 ETH: rgmii, phy_addr=3 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-platform: EHCI generic platform driver ehci-platform f9890000.ehci: EHCI Host Controller ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1 ehci-platform f9890000.ehci: irq 34, io mem 0xf9890000 ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-platform: OHCI generic platform driver ohci-platform f9880000.ohci: Generic Platform OHCI controller ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2 ohci-platform f9880000.ohci: irq 35, io mem 0xf9880000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xhci-hcd f98a0000.xhci: xHCI Host Controller xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 3 xhci-hcd f98a0000.xhci: hcc params 0x0220f06c hci version 0x100 quirks 0x00030010 xhci-hcd f98a0000.xhci: irq 37, io mem 0xf98a0000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected xhci-hcd f98a0000.xhci: xHCI Host Controller xhci-hcd f98a0000.xhci: new USB bus registered, assigned bus number 4 usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected usbcore: registered new interface driver uas usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver sp805-wdt f8a2c000.watchdog: registration successful registered new interface driver himciV2.0_4.4.35_20170401 usb 1-1: new high-speed USB device number 2 using ehci-platform usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 mmc0: MAN_BKOPS_EN bit is not set mmc0: new DDR MMC card at address 0001 mmcblk0: mmc0:0001 AJTD4R 14.6 GiB mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB mmcblk0: p1(fastboot) p2(bootargs) p3(bootargsbak) p4(recovery) p5(deviceinfo) p6(securestore) p7(baseparam) p8(pqparam) p9(dtbo) p10(logo) p11(logobak) p12(fastplay) p13(recoverybak) p14(boot) p15(misc) p16(trustedcore) p17(system) p18(cache) p19(vendor) p20(private) p21(unuse) p22(flag) p23(softwareinfo) p24(loaderdb) p25(loader) p26(linuxkernel1) p27(linuxkernel2) p28(linuxkernel3) p29(linuxkernel4) p30(rootfs) p31(userdata) usb 1-2: new high-speed USB device number 3 using ehci-platform f9820000.himciv200.SD: eMMC/MMC/SD Device NOT detected! f9c40000.himciv200.SD: eMMC/MMC/SD Device NOT detected! usbcore: registered new interface driver usbhid usbhid: USB HID core driver ashmem: initialized usbcore: registered new interface driver snd-usb-audio oprofile: using timer interrupt. wireguard: WireGuard 1.0.20220627 loaded. See www.wireguard.com for information. wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved. Initializing XFRM netlink socket NET: Registered protocol family 10 NET: Registered protocol family 17 Key type dns_resolver registered Registering SWP/SWPB emulation handler Bluetooth: Starting self testing Bluetooth: ECDH test passed in 20857 usecs Bluetooth: SMP test passed in 73 usecs Bluetooth: Finished self testing ALSA device list: No soundcards found. Freeing unused kernel memory: 560K (c0b06000 - c0b92000) This architecture does not have kernel memory protection. EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: (null) Load hi_media.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:05:50]) Load hi_mmz.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:05:53]) virtual device initialization. Load hi_common.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:05:57]) Load hi_pq.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:23]) scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 0000 PQ: 0 ANSI: 4 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 121077761 512-byte logical blocks: (62.0 GB/57.7 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: [sda] Attached SCSI removable disk Load hi_cipher.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:09:29]) Load hi_hdmi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:26]) Load hi_vou.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:14:18]) Load hi_gpio.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:10:27]) Load hi_gpioi2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:48]) Load hi_i2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:49]) Load hi_tde.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:57]) Load hi_otp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:05]) Load hi_demux.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:09:32]) Load hi_adec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:08:29]) Load hi_vfmw.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:13:34]) Load hi_vpss.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:15:00]) Load hi_vdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:13:07]) Load hi_adsp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:08:31]) hisi-sndcard hisi-sndcard: aiao-hifi <-> hisi-i2s mapping ok Load hi_aiao.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:08:42]) Load hi_pvr.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:49]) Load hi_tuner.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:10:25]) Load hi_fb.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:43]) Mali: Mali device driver loaded misc hi_dbe: hi_dbe ready Load hi_ir.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:51]) Load hi_jpegdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:53]) Load hi_jpegenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:54]) Load hi_png.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:15]) Load hi_advca.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:08:34]) Load hi_venc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:13:18]) Load hi_aenc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:08:41]) Load hi_keyled.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:11:56]) Load hi_sci.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:50]) Load hi_vi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:13:39]) Load hi_pmoc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 18 2023, 11:12:09]) random: nonblocking pool is initialized ahci: probe of f9900000.hiahci failed with error -1 Starting fusion driver v9.0.2 -> initializing shared area at dd6f4000 loading drv module..., build 10:51:46 18/08/23. DVB: registering new adapter (dags) (NULL device *): DVB: registering adapter 0 frontend 0 (M1502A DVB-S/S2)... (NULL device *): DVB: registering adapter 0 frontend 1 (AVL6762 DVB-C/T/T2)... input: qviart's hisi type 1 remote control as /devices/virtual/input/input0 input: qviart hisi front key input as /devices/virtual/input/input1 drv module loaded... FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. SGI XFS with ACLs, security attributes, realtime, no debug enabled EXT4-fs (mmcblk0p30): re-mounted. Opts: data=ordered UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2) UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2) yaffs: dev is 187695107 name is "mmcblk0p3" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3" yaffs: yaffs: MTD device 3 either not valid or unavailable yaffs: dev is 187695107 name is "mmcblk0p3" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3" yaffs: yaffs: MTD device 3 either not valid or unavailable usbcore: registered new interface driver rtl8192eu [15:24:44:088 ERROR-HI_VPSS]:HI_DRV_VPSS_RelPortFrame[592]:Port = 0 RelPortFrame 4 Failed IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2) UDF-fs: warning (device mmcblk0p1): udf_fill_super: No partition found (2) yaffs: dev is 187695105 name is "mmcblk0p1" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1" yaffs: yaffs: MTD device 1 either not valid or unavailable yaffs: dev is 187695105 name is "mmcblk0p1" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.1,"mmcblk0p1" yaffs: yaffs: MTD device 1 either not valid or unavailable UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2) UDF-fs: warning (device mmcblk0p3): udf_fill_super: No partition found (2) yaffs: dev is 187695107 name is "mmcblk0p3" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3" yaffs: yaffs: MTD device 3 either not valid or unavailable yaffs: dev is 187695107 name is "mmcblk0p3" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.3,"mmcblk0p3" yaffs: yaffs: MTD device 3 either not valid or unavailable UDF-fs: warning (device mmcblk0p4): udf_fill_super: No partition found (2) UDF-fs: warning (device mmcblk0p4): udf_fill_super: No partition found (2) yaffs: dev is 187695108 name is "mmcblk0p4" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.4,"mmcblk0p4" yaffs: yaffs: MTD device 4 either not valid or unavailable yaffs: dev is 187695108 name is "mmcblk0p4" rw yaffs: passed flags "" yaffs: yaffs: Attempting MTD mount of 179.4,"mmcblk0p4" yaffs: yaffs: MTD device 4 either not valid or unavailable (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000) (NULL device *): DVB: adapter 0 frontend 0 symbol rate 0 out of range (1000000..45000000)
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Tuner type : M1502A DVB-S/S2
tested on openatv 7.4
full dmesg:
The text was updated successfully, but these errors were encountered: