Skip to content

Latest commit

 

History

History
52 lines (43 loc) · 1.53 KB

README-J.md

File metadata and controls

52 lines (43 loc) · 1.53 KB
Raw

Pythonによるラジオテレタイプの復調プログラム

This is a Python program to demodulate the radio teletype known as FSK modulation. This is the simplest example, and only the Terminal Unit part of the RTTY is implemented. The rest should be coded according to ITA2, for example.

サンプル音声ファイル

This ogg file should be converted to wave format. https://en.wikipedia.org/wiki/File:RTTY.ogg it is from wikipedia

ogg ファイルを wave に変換する

Install ffmpeg and run:

ffmpeg -i RTTY.ogg -ar 8k -c:a pcm_u8 -f wav rtty3s.wav

パラメーター

Some parameters in the source code need to be modified according to the audio file to be input.

fname='rtty3s.wav' # should be specify the filename.
smp= 8000          # Sampling Rate
FQm= smp/914.0     # Mark Frequency 914Hz
FQs= smp/1086.0    # Space Frequency 1086Hz
  • fname
    should be specify the filename.
  • smp
    Sampling Rate.
  • FQm
    smp / Mark Frequency.
  • FQs
    smp / Space Frequency.

マークとスペースの周波数の設定方法

To find MARK & SPACE frequences, You can use any spectrum analyze tools on your PC. For example I use Sazanami Version 1.7.3 2020/10/22 .

  • MARK Frequency about 915Hz
  • SPACE Frequency is about 1085Hz

使い方

Please specify an appropriate audio file for the input. This program assumes 8KHz sampling, mono, 8bit quantization, and no sign.

python -m src.main

Demodulation example