Gerber file latest version

[manibenwa]

Hai ,

We are developing Nodemcu board and this github has 4 gerber files related to the Nodemcu board
which one should i select or which is the latest version gerber file???

[vowstar]

It is better to use the PCB source file, not gerber file. I think the latest gerber file is in master branch of this repo, but the most latest gerber file you'd better generate from PCB source file.

[manibenwa]

Thanks for replay,
Where are the PCB source files ?? I haven't found the PCB source files in https://github.com/nodemcu/nodemcu-devkit-v1.0 link!!
Please help me....

[vowstar]

https://github.com/nodemcu/nodemcu-devkit-v1.0/blob/master/NODEMCU_DEVKIT_V1.0.PcbDoc

This file is the PCB source file, please use Altium designer to open it.
All this project is open source and in this repo.

[manibenwa]

Thanks VOWSTAR for useful information

[manibenwa]

Hai,
I found the BOM of this board in this link https://github.com/nodemcu/nodemcu-devkit-v1.0/blob/master/NODEMCU_DEVKIT_V1.0.PDF. I need voltage rating of capacitor and wattage rating of resistors.could u tell me is there any possible way to get the ratings of this capacitors and resistors????

[vowstar]

The parameters we actually use is

Designator	Parameter
C1,C4,C6	100nF (104) ±10% 16V
C2	100uF(107) ±10% 6.3V Case B 3528
C3,C5,C8	10uF(106) ±20% 10V
C7	10uF(106) ±10% 25V
D1	SOD-123 40V,1A,VF=0.45V@1A
LED1	1.6x0.8x0.6 Iv= 35~65mcd @if=5mA ESD:1000V
R1,R2,R3,R4,R5,R7,R8	12KΩ (1202) ±1% 0.0625W [50V TYP] [100V MAX] T.C.R ±100
R6,R9,R11,R12	470Ω (4700) ±1% 0.0625W [50V TYP] [100V MAX] T.C.R ±100
R10(Do not install)	0Ω (0R00) ±1% 0.0625W [50V TYP] [100V MAX] T.C.R ±100
R13	220kΩ (2203) ±1% 0.0625W [50V TYP] [100V MAX] T.C.R ±100
R14	100kΩ (1003) ±1% 0.0625W [50V TYP] [100V MAX] T.C.R ±100

[manibenwa]

Thanks vowstar.
if u have part numbers it is really help for me.

[manibenwa]

Hai,
does nodemcu have next version??if their send me some information ..

[vowstar]

@manibenwa I'm taking part in the design of an AI chip, next open hardware project may be something about AI chip.

[manibenwa]

Hai vowstar,
Iam using NodeMCU DEVKIT V1.0.
I would like to power the nodemcu board without usb. I want power up the board with battery
(5v or 12v).is vin pin is used to power the board with external battery ??