The media could not be loaded, either because the server or network failed or because the format is not supported. #1198
Replies: 2 comments 13 replies
-
Getting the same issue on 2.9.1 also but one of my wyze cam v3 works but none of the other v3 and v2's work. all say format is unsupported. afaik, all cameras are on latest firmware |
Beta Was this translation helpful? Give feedback.
-
Remote cams failed when firmware was updated to latest firmware months ago. I traveled to the remote site and downgraded all of my cameras and things were good - for awhile. 4.36.11.7071 runs on those V3 cameras with a V3 PTZ camera running 4.50.4.7252. I have a Flood Pro running 2.0.921 also that's not been added to BlueIris yet. Locally I have a V3 running 4.61.0.3 (RTSP but turned off), 2x V3 running 4.36.11.8391, a Cam Pan running 4.10.9.2847, and a V2 running 4.28.4.41 (RTSP turned on). ALL of the cameras are having issues on the Wyze-Bridge status page :( In the logs I see audio pipe closing messages in yellow and "[cam-name] [CONTROL] ERROR - error='[-20029] AV_ER_CLEANBUF_ALREADY_CALLED', cmd='_bitrate'" messages showing up in red. My flood cam is throwing an odd error occasionally too -> [floodlight-cam] [-10] IOTC_ER_UNLICENSE and then WyzeBridge says it will cool down that cam. Happy to try tweaks and help with troubleshooting although my remote cams cannot be easily accessed. Flashing firmware and making changes locally is easy however and I could also take one of my cams elsewhere to troubleshoot remote access issues too. I have a V4 and a new PTZ I've yet to setup. I note that all of the snapshots displayed on the status page show 5/13 or 5/14 but I'm not sure that means much as this has been an issue longer than that. If the dev would like access to one or more of the cams I can likely help with that. I get alerts and things just fine from the cams and can use my Wyze service fine on all of them but my BI system has proven valuable to catch things the service misses.... |
Beta Was this translation helpful? Give feedback.
-
I've started getting this in the WEB UI, version before last I believe. I'm currently up to date on v2.9.1. I'm sure there's some setting I've screwed up to get stuck here and it doesn't appear on all of my feeds. This happens both on local and on remote feeds (remote feeds VERY important to me BTW). I'm running this on unRAID in a container, API keys enabled and WEB Auth turned off. Thoughts? I feed BlueIRIS with this but do pay Wyze for their service as well.
Beta Was this translation helpful? Give feedback.
All reactions