Skip to content

Latest commit

 

History

History
114 lines (73 loc) · 7.15 KB

adguard-home.md

File metadata and controls

114 lines (73 loc) · 7.15 KB
Raw

AdGuard Home

AdGuard Home is a network-wide DNS software for blocking ads & tracking.

Warning: running a public DNS server is not advisable. You'd better install AdGuard Home in a trusted local network, or adjust its network interfaces and port exposure (via the variables in the Networking configuration section below) so that you don't expose your DNS server publicly to the whole world. If you're exposing your DNS server publicly, consider restricting who can use it by adjusting the Allowed clients setting in the Access settings section of Settings -> DNS settings.

Dependencies

This service requires the following other services:

Configuration

To enable this service, add the following configuration to your vars.yml file and re-run the installation process:

########################################################################
#                                                                      #
# adguard-home                                                         #
#                                                                      #
########################################################################

adguard_home_enabled: true

adguard_home_hostname: mash.example.com

# Hosting under a subpath sort of works, but is not ideal
# (see the URL section below for details).
# Consider using a dedicated hostname and removing the line below.
adguard_home_path_prefix: /adguard-home

########################################################################
#                                                                      #
# /adguard-home                                                        #
#                                                                      #
########################################################################

URL

In the example configuration above, we configure the service to be hosted at https://mash.example.com/adguard-home.

You can remove the adguard_home_path_prefix variable definition, to make it default to /, so that the service is served at https://mash.example.com/.

When hosting under a subpath, you may hit this bug, which causes these annoyances:

  • upon initial usage, you will be redirected to /install.html and would need to manually adjust this URL to something like /adguard-home/install.html (depending on your adguard_home_path_prefix). After the installation wizard completes, you'd be redirected to /index.html incorrectly as well.

  • every time you hit the homepage and you're not logged in, you will be redirected to /login.html and would need to manually adjust this URL to something like /adguard-home/login.html (depending on your adguard_home_path_prefix)

Networking

By default, the following ports will be exposed by the container on all network interfaces:

  • 53 over TCP, controlled by adguard_home_container_dns_tcp_bind_port - used for DNS over TCP
  • 53 over UDP, controlled by adguard_home_container_dns_udp_bind_port - used for DNS over UDP

Docker automatically opens these ports in the server's firewall, so you likely don't need to do anything. If you use another firewall in front of the server, you may need to adjust it.

To expose these ports only on some network interfaces, you can use additional configuration like this:

# Expose only on 192.168.1.15
adguard_home_container_dns_tcp_bind_port: '192.168.1.15:53'
adguard_home_container_dns_udp_bind_port: '192.168.1.15:53'

Usage

After installation, you can go to the AdGuard Home URL, as defined in adguard_home_hostname and adguard_home_path_prefix.

As mentioned in the URL section above, you may hit some annoyances when hosting under a subpath.

The first time you visit the AdGuard Home pages, you'll go through a setup wizard make sure to set the HTTP port under "Admin Web Interface" to 3000. This is the in-container port that our Traefik setup expects and uses for serving the install wizard to begin with. If you go with the default (80), the web UI will stop working after the installation wizard completes.

Things you should consider doing later:

  • increasing the per-client Rate Limit (from the default of 20) in the DNS server configuration section in Settings -> DNS Settings
  • enabling caching in the DNS cache configuration section in Settings -> DNS Settings
  • adding additional blocklists by discovering them on Firebog or other sources and importing them from Filters -> DNS blocklists
  • reading the AdGuard Home README and Wiki

Troubleshooting and workaround

Adguard Home does not currently support being setup with a non-root account (see issue). As the playbook uses the user mash when starting services, you will likely encounter the following error when adguard-home.service tries to start for the first time:

mar 02 19:11:59 $hostname mash-adguard-home[872496]: 2024/03/02 18:11:59.706251 [info] Checking if AdGuard Home has necessary permissions
mar 02 19:11:59 $hostname mash-adguard-home[872496]: 2024/03/02 18:11:59.706257 [fatal] This is the first launch of AdGuard Home. You must run it as Administrator.

You can workaround this issue by editing mash-adguard-home.service and temporarily make it start Adguard Home as the root user for the first time, and then revert it back to using a regular user afterwards. Follow the steps below, which require you to be root to execute the commands:

  1. Run systemctl edit --full mash-adguard-home.service to edit Adguard Home's service file and remove or comment out the line starting with --user (e.g. --user=996:3992 \ - the numbers represent the uid/gid of the mash user, so your values may be different):

    ExecStartPre=/usr/bin/env docker create \
                        --rm \
                        --name=mash-adguard-home \
                        --log-driver=none \
                        --user=996:3992 \  <--- remove temporarily

  2. Run systemctl restart mash-adguard-home.service to restart the service.

  3. Perform the first time setup as documented under usage.

  4. Run systemctl stop mash-adguard-home.service to stop the service.

  5. Run chown -R mash:mash /mash/adguard-home/workdir to change ownership of the files created during the first-time setup from root to mash. Optionally, use ls -ll /mash/adguard-home/workdir to check the file ownership before and after running chown.

  6. Run the playbook again to rebuild /etc/systemd/system/mash-adguard-home.service and start AdGuard Home again: just install-service adguard-home.service.

  7. If you didn't get any errors, Adguard Home should be running correctly. You can also check on the service with: journalctl -fu mash-adguard-home.service.