install.sh

#!/bin/bash

red='\e[91m'
green='\e[92m'
yellow='\e[93m'
magenta='\e[95m'
cyan='\e[96m'
none='\e[0m'
_red() { echo -e ${red}$*${none}; }
_green() { echo -e ${green}$*${none}; }
_yellow() { echo -e ${yellow}$*${none}; }
_magenta() { echo -e ${magenta}$*${none}; }
_cyan() { echo -e ${cyan}$*${none}; }

# Root
[[ $(id -u) != 0 ]] && echo -e "\n 哎呀……请使用 ${red}root ${none}用户运行 ${yellow}~(^_^) ${none}\n" && exit 1

cmd="apt-get"

sys_bit=$(uname -m)

case $sys_bit in
    # i[36]86)
    # 	v2ray_bit="32"
    # 	caddy_arch="386"
    # 	;;
    'amd64' | x86_64)
        v2ray_bit="64"
        caddy_arch="amd64"
    ;;
    # *armv6*)
    # 	v2ray_bit="arm32-v6"
    # 	caddy_arch="arm6"
    # 	;;
    # *armv7*)
    # 	v2ray_bit="arm32-v7a"
    # 	caddy_arch="arm7"
    # 	;;
    *aarch64* | *armv8*)
        v2ray_bit="arm64-v8a"
        caddy_arch="arm64"
    ;;
    *)
        echo -e "
	哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}

	备注: 仅支持 Ubuntu 16+ / Debian 8+ / CentOS 7+ 系统
        " && exit 1
    ;;
esac

# 笨笨的检测方法
if [[ $(command -v apt-get) || $(command -v yum) ]] && [[ $(command -v systemctl) ]]; then
    
    if [[ $(command -v yum) ]]; then
        
        cmd="yum"
        
    fi
    
else
    
    echo -e "
	哈哈……这个 ${red}辣鸡脚本${none} 不支持你的系统。 ${yellow}(-_-) ${none}

	备注: 仅支持 Ubuntu 16+ / Debian 8+ / CentOS 7+ 系统
    " && exit 1
    
fi

uuid=$(cat /proc/sys/kernel/random/uuid)
old_id="e55c8d17-2cf3-b21a-bcf1-eeacb011ed79"
v2ray_server_config="/etc/v2ray/config.json"
v2ray_client_config="/etc/v2ray/233blog_v2ray_config.json"
backup="/etc/v2ray/233blog_v2ray_backup.conf"
_v2ray_sh="/usr/local/sbin/v2ray"
systemd=true
# _test=true

transport=(
    TCP
    TCP_HTTP
    WebSocket
    "WebSocket + TLS"
    HTTP/2
    mKCP
    mKCP_utp
    mKCP_srtp
    mKCP_wechat-video
    mKCP_dtls
    mKCP_wireguard
    QUIC
    QUIC_utp
    QUIC_srtp
    QUIC_wechat-video
    QUIC_dtls
    QUIC_wireguard
    TCP_dynamicPort
    TCP_HTTP_dynamicPort
    WebSocket_dynamicPort
    mKCP_dynamicPort
    mKCP_utp_dynamicPort
    mKCP_srtp_dynamicPort
    mKCP_wechat-video_dynamicPort
    mKCP_dtls_dynamicPort
    mKCP_wireguard_dynamicPort
    QUIC_dynamicPort
    QUIC_utp_dynamicPort
    QUIC_srtp_dynamicPort
    QUIC_wechat-video_dynamicPort
    QUIC_dtls_dynamicPort
    QUIC_wireguard_dynamicPort
    VLESS_WebSocket_TLS
)

ciphers=(
    aes-128-gcm
    aes-256-gcm
    chacha20-ietf-poly1305
)

_load() {
    local _dir="/etc/v2ray/233boy/v2ray/src/"
    . "${_dir}$@"
}
_sys_timezone() {
    IS_OPENVZ=
    if hostnamectl status | grep -q openvz; then
        IS_OPENVZ=1
    fi
    
    echo
    timedatectl set-timezone Asia/Shanghai
    timedatectl set-ntp true
    echo "已将你的主机设置为Asia/Shanghai时区并通过systemd-timesyncd自动同步时间。"
    echo
    
    if [[ $IS_OPENVZ ]]; then
        echo
        echo -e "你的主机环境为 ${yellow}Openvz${none} ，建议使用${yellow}v2ray mkcp${none}系列协议。"
        echo -e "注意：${yellow}Openvz${none} 系统时间无法由虚拟机内程序控制同步。"
        echo -e "如果主机时间跟实际相差${yellow}超过90秒${none}，v2ray将无法正常通信，请发ticket联系vps主机商调整。"
    fi
}

_sys_time() {
    echo -e "\n主机时间：${yellow}"
    timedatectl status | sed -n '1p;4p'
    echo -e "${none}"
    [[ $IS_OPENV ]] && pause
}
v2ray_config() {
    # clear
    echo
    while :; do
        echo -e "请选择 "$yellow"V2Ray"$none" 传输协议 [${magenta}1-${#transport[*]}$none]"
        echo
        for ((i = 1; i <= ${#transport[*]}; i++)); do
            Stream="${transport[$i - 1]}"
            if [[ "$i" -le 9 ]]; then
                # echo
                echo -e "$yellow  $i. $none${Stream}"
            else
                # echo
                echo -e "$yellow $i. $none${Stream}"
            fi
        done
        echo
        echo "备注1: 含有 [dynamicPort] 的即启用动态端口.."
        echo "备注2: [utp | srtp | wechat-video | dtls | wireguard] 分别伪装成 [BT下载 | 视频通话 | 微信视频通话 | DTLS 1.2 数据包 | WireGuard 数据包]"
        echo
        read -p "$(echo -e "(默认协议: ${cyan}TCP$none)"):" v2ray_transport
        [ -z "$v2ray_transport" ] && v2ray_transport=1
        case $v2ray_transport in
            [1-9] | [1-2][0-9] | 3[0-3])
                echo
                echo
                echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
    done
    v2ray_port_config
}
v2ray_port_config() {
    case $v2ray_transport in
        4 | 5 | 33)
            tls_config
        ;;
        *)
            local random=$(shuf -i20001-65535 -n1)
            while :; do
                echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]"
                read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port
                [ -z "$v2ray_port" ] && v2ray_port=$random
                case $v2ray_port in
                    [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
                        echo
                        echo
                        echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
                        echo "----------------------------------------------------------------"
                        echo
                        break
                    ;;
                    *)
                        error
                    ;;
                esac
            done
            if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
                v2ray_dynamic_port_start
            fi
        ;;
    esac
}

v2ray_dynamic_port_start() {
    
    while :; do
        echo -e "请输入 "$yellow"V2Ray 动态端口开始 "$none"范围 ["$magenta"1-65535"$none"]"
        read -p "$(echo -e "(默认开始端口: ${cyan}10000$none):")" v2ray_dynamic_port_start_input
        [ -z $v2ray_dynamic_port_start_input ] && v2ray_dynamic_port_start_input=10000
        case $v2ray_dynamic_port_start_input in
            $v2ray_port)
                echo
                echo " 不能和 V2Ray 端口一毛一样...."
                echo
                echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}"
                error
            ;;
            [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
                echo
                echo
                echo -e "$yellow V2Ray 动态端口开始 = $cyan$v2ray_dynamic_port_start_input$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
        
    done
    
    if [[ $v2ray_dynamic_port_start_input -lt $v2ray_port ]]; then
        lt_v2ray_port=true
    fi
    
    v2ray_dynamic_port_end
}
v2ray_dynamic_port_end() {
    
    while :; do
        echo -e "请输入 "$yellow"V2Ray 动态端口结束 "$none"范围 ["$magenta"1-65535"$none"]"
        read -p "$(echo -e "(默认结束端口: ${cyan}20000$none):")" v2ray_dynamic_port_end_input
        [ -z $v2ray_dynamic_port_end_input ] && v2ray_dynamic_port_end_input=20000
        case $v2ray_dynamic_port_end_input in
            [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
                
                if [[ $v2ray_dynamic_port_end_input -le $v2ray_dynamic_port_start_input ]]; then
                    echo
                    echo " 不能小于或等于 V2Ray 动态端口开始范围"
                    echo
                    echo -e " 当前 V2Ray 动态端口开始：${cyan}$v2ray_dynamic_port_start_input${none}"
                    error
                    elif [ $lt_v2ray_port ] && [[ ${v2ray_dynamic_port_end_input} -ge $v2ray_port ]]; then
                    echo
                    echo " V2Ray 动态端口结束范围 不能包括 V2Ray 端口..."
                    echo
                    echo -e " 当前 V2Ray 端口：${cyan}$v2ray_port${none}"
                    error
                else
                    echo
                    echo
                    echo -e "$yellow V2Ray 动态端口结束 = $cyan$v2ray_dynamic_port_end_input$none"
                    echo "----------------------------------------------------------------"
                    echo
                    break
                fi
            ;;
            *)
                error
            ;;
        esac
        
    done
    
}

tls_config() {
    
    echo
    local random=$(shuf -i20001-65535 -n1)
    while :; do
        echo -e "请输入 "$yellow"V2Ray"$none" 端口 ["$magenta"1-65535"$none"]，不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
        read -p "$(echo -e "(默认端口: ${cyan}${random}$none):")" v2ray_port
        [ -z "$v2ray_port" ] && v2ray_port=$random
        case $v2ray_port in
            80)
                echo
                echo " ...都说了不能选择 80 端口了咯....."
                error
            ;;
            443)
                echo
                echo " ..都说了不能选择 443 端口了咯....."
                error
            ;;
            [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
                echo
                echo
                echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
    done
    
    while :; do
        echo
        echo -e "请输入一个 ${magenta}正确的域名${none}，一定一定一定要正确，不！能！出！错！"
        read -p "(例如：233blog.com): " domain
        [ -z "$domain" ] && error && continue
        echo
        echo
        echo -e "$yellow 你的域名 = $cyan$domain$none"
        echo "----------------------------------------------------------------"
        break
    done
    get_ip
    echo
    echo
    echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
    echo
    echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
    echo
    echo -e "$yellow 请将 $magenta$domain$none $yellow 解析到: $cyan$ip$none"
    echo "----------------------------------------------------------------"
    echo
    
    while :; do
        
        read -p "$(echo -e "(是否已经正确解析: [${magenta}Y$none]):") " record
        if [[ -z "$record" ]]; then
            error
        else
            if [[ "$record" == [Yy] ]]; then
                domain_check
                echo
                echo
                echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none"
                echo "----------------------------------------------------------------"
                echo
                break
            else
                error
            fi
        fi
        
    done
    
    if [[ $v2ray_transport -eq 4 ]]; then
        auto_tls_config
    else
        caddy=true
        install_caddy_info="打开"
    fi
    
    if [[ $caddy ]]; then
        path_config_ask
    fi
}
auto_tls_config() {
    echo -e "

		安装 Caddy 来实现 自动配置 TLS

		如果你已经安装 Nginx 或 Caddy

		$yellow并且..自己能搞定配置 TLS$none

		那么就不需要 打开自动配置 TLS
    "
    echo "----------------------------------------------------------------"
    echo
    
    while :; do
        
        read -p "$(echo -e "(是否自动配置 TLS: [${magenta}Y/N$none]):") " auto_install_caddy
        if [[ -z "$auto_install_caddy" ]]; then
            error
        else
            if [[ "$auto_install_caddy" == [Yy] ]]; then
                caddy=true
                install_caddy_info="打开"
                echo
                echo
                echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"
                echo "----------------------------------------------------------------"
                echo
                break
                elif [[ "$auto_install_caddy" == [Nn] ]]; then
                install_caddy_info="关闭"
                echo
                echo
                echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"
                echo "----------------------------------------------------------------"
                echo
                break
            else
                error
            fi
        fi
        
    done
}
path_config_ask() {
    echo
    while :; do
        echo -e "是否开启 网站伪装 和 路径分流 [${magenta}Y/N$none]"
        read -p "$(echo -e "(默认: [${cyan}N$none]):")" path_ask
        [[ -z $path_ask ]] && path_ask="n"
        
        case $path_ask in
            Y | y)
                path_config
                break
            ;;
            N | n)
                echo
                echo
                echo -e "$yellow 网站伪装 和 路径分流 = $cyan 不想配置 $none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
    done
}
path_config() {
    echo
    while :; do
        echo -e "请输入想要 ${magenta} 用来分流的路径 $none , 例如 /233blog , 那么只需要输入 233blog 即可"
        read -p "$(echo -e "(默认: [${cyan}233blog$none]):")" path
        [[ -z $path ]] && path="233blog"
        
        case $path in
            *[/$]*)
                echo
                echo -e " 由于这个脚本太辣鸡了..所以分流的路径不能包含$red / $none或$red $ $none这两个符号.... "
                echo
                error
            ;;
            *)
                echo
                echo
                echo -e "$yellow 分流的路径 = ${cyan}/${path}$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
        esac
    done
    is_path=true
    proxy_site_config
}
proxy_site_config() {
    echo
    while :; do
        echo -e "请输入 ${magenta}一个正确的 $none ${cyan}网址$none 用来作为 ${cyan}网站的伪装$none , 例如 https://liyafly.com"
        echo -e "举例...你当前的域名是 $green$domain$none , 伪装的网址的是 https://liyafly.com"
        echo -e "然后打开你的域名时候...显示出来的内容就是来自 https://liyafly.com 的内容"
        echo -e "其实就是一个反代...明白就好..."
        echo -e "如果不能伪装成功...可以使用 v2ray config 修改伪装的网址"
        read -p "$(echo -e "(默认: [${cyan}https://liyafly.com$none]):")" proxy_site
        [[ -z $proxy_site ]] && proxy_site="https://liyafly.com"
        
        case $proxy_site in
            *[#$]*)
                echo
                echo -e " 由于这个脚本太辣鸡了..所以伪装的网址不能包含$red # $none或$red $ $none这两个符号.... "
                echo
                error
            ;;
            *)
                echo
                echo
                echo -e "$yellow 伪装的网址 = ${cyan}${proxy_site}$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
        esac
    done
}

blocked_hosts() {
    echo
    while :; do
        echo -e "是否开启广告拦截(会影响性能) [${magenta}Y/N$none]"
        read -p "$(echo -e "(默认 [${cyan}N$none]):")" blocked_ad
        [[ -z $blocked_ad ]] && blocked_ad="n"
        
        case $blocked_ad in
            Y | y)
                blocked_ad_info="开启"
                ban_ad=true
                echo
                echo
                echo -e "$yellow 广告拦截 = $cyan开启$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            N | n)
                blocked_ad_info="关闭"
                echo
                echo
                echo -e "$yellow 广告拦截 = $cyan 关闭 $none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
    done
}
shadowsocks_config() {
    
    echo
    
    while :; do
        echo -e "是否配置 ${yellow}Shadowsocks${none} [${magenta}Y/N$none]"
        read -p "$(echo -e "(默认 [${cyan}N$none]):") " install_shadowsocks
        [[ -z "$install_shadowsocks" ]] && install_shadowsocks="n"
        if [[ "$install_shadowsocks" == [Yy] ]]; then
            echo
            shadowsocks=true
            shadowsocks_port_config
            break
            elif [[ "$install_shadowsocks" == [Nn] ]]; then
            break
        else
            error
        fi
        
    done
    
}

shadowsocks_port_config() {
    local random=$(shuf -i20001-65535 -n1)
    while :; do
        echo -e "请输入 "$yellow"Shadowsocks"$none" 端口 ["$magenta"1-65535"$none"]，不能和 "$yellow"V2Ray"$none" 端口相同"
        read -p "$(echo -e "(默认端口: ${cyan}${random}$none):") " ssport
        [ -z "$ssport" ] && ssport=$random
        case $ssport in
            $v2ray_port)
                echo
                echo " 不能和 V2Ray 端口一毛一样...."
                error
            ;;
            [1-9] | [1-9][0-9] | [1-9][0-9][0-9] | [1-9][0-9][0-9][0-9] | [1-5][0-9][0-9][0-9][0-9] | 6[0-4][0-9][0-9][0-9] | 65[0-4][0-9][0-9] | 655[0-3][0-5])
                if [[ $v2ray_transport == [45] ]]; then
                    local tls=ture
                fi
                if [[ $tls && $ssport == "80" ]] || [[ $tls && $ssport == "443" ]]; then
                    echo
                    echo -e "由于你已选择了 "$green"WebSocket + TLS $none或$green HTTP/2"$none" 传输协议."
                    echo
                    echo -e "所以不能选择 "$magenta"80"$none" 或 "$magenta"443"$none" 端口"
                    error
                    elif [[ $v2ray_dynamic_port_start_input == $ssport || $v2ray_dynamic_port_end_input == $ssport ]]; then
                    local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}"
                    echo
                    echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port"
                    error
                    elif [[ $v2ray_dynamic_port_start_input -lt $ssport && $ssport -le $v2ray_dynamic_port_end_input ]]; then
                    local multi_port="${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}"
                    echo
                    echo " 抱歉，此端口和 V2Ray 动态端口 冲突，当前 V2Ray 动态端口范围为：$multi_port"
                    error
                else
                    echo
                    echo
                    echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none"
                    echo "----------------------------------------------------------------"
                    echo
                    break
                fi
            ;;
            *)
                error
            ;;
        esac
        
    done
    
    shadowsocks_password_config
}
shadowsocks_password_config() {
    
    while :; do
        echo -e "请输入 "$yellow"Shadowsocks"$none" 密码"
        read -p "$(echo -e "(默认密码: ${cyan}233blog.com$none)"): " sspass
        [ -z "$sspass" ] && sspass="233blog.com"
        case $sspass in
            *[/$]*)
                echo
                echo -e " 由于这个脚本太辣鸡了..所以密码不能包含$red / $none或$red $ $none这两个符号.... "
                echo
                error
            ;;
            *)
                echo
                echo
                echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
        esac
        
    done
    
    shadowsocks_ciphers_config
}
shadowsocks_ciphers_config() {
    
    while :; do
        echo -e "请选择 "$yellow"Shadowsocks"$none" 加密协议 [${magenta}1-${#ciphers[*]}$none]"
        for ((i = 1; i <= ${#ciphers[*]}; i++)); do
            ciphers_show="${ciphers[$i - 1]}"
            echo
            echo -e "$yellow $i. $none${ciphers_show}"
        done
        echo
        read -p "$(echo -e "(默认加密协议: ${cyan}${ciphers[1]}$none)"):" ssciphers_opt
        [ -z "$ssciphers_opt" ] && ssciphers_opt=2
        case $ssciphers_opt in
            [1-3])
                ssciphers=${ciphers[$ssciphers_opt - 1]}
                echo
                echo
                echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none"
                echo "----------------------------------------------------------------"
                echo
                break
            ;;
            *)
                error
            ;;
        esac
        
    done
    pause
}

install_info() {
    clear
    echo
    echo " ....准备安装了咯..看看有毛有配置正确了..."
    echo
    echo "---------- 安装信息 -------------"
    echo
    echo -e "$yellow V2Ray 传输协议 = $cyan${transport[$v2ray_transport - 1]}$none"
    
    if [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]]; then
        echo
        echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
        echo
        echo -e "$yellow 你的域名 = $cyan$domain$none"
        echo
        echo -e "$yellow 域名解析 = ${cyan}我确定已经有解析了$none"
        echo
        echo -e "$yellow 自动配置 TLS = $cyan$install_caddy_info$none"
        
        if [[ $ban_ad ]]; then
            echo
            echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
        fi
        if [[ $is_path ]]; then
            echo
            echo -e "$yellow 路径分流 = ${cyan}/${path}$none"
        fi
        elif [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
        echo
        echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
        echo
        echo -e "$yellow V2Ray 动态端口范围 = $cyan${v2ray_dynamic_port_start_input} - ${v2ray_dynamic_port_end_input}$none"
        
        if [[ $ban_ad ]]; then
            echo
            echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
        fi
    else
        echo
        echo -e "$yellow V2Ray 端口 = $cyan$v2ray_port$none"
        
        if [[ $ban_ad ]]; then
            echo
            echo -e "$yellow 广告拦截 = $cyan$blocked_ad_info$none"
        fi
    fi
    if [ $shadowsocks ]; then
        echo
        echo -e "$yellow Shadowsocks 端口 = $cyan$ssport$none"
        echo
        echo -e "$yellow Shadowsocks 密码 = $cyan$sspass$none"
        echo
        echo -e "$yellow Shadowsocks 加密协议 = $cyan${ssciphers}$none"
    else
        echo
        echo -e "$yellow 是否配置 Shadowsocks = ${cyan}未配置${none}"
    fi
    echo
    echo "---------- END -------------"
    echo
    pause
    echo
}

domain_check() {
    # if [[ $cmd == "yum" ]]; then
    # 	yum install bind-utils -y
    # else
    # 	$cmd install dnsutils -y
    # fi
    # test_domain=$(dig $domain +short)
    test_domain=$(ping $domain -c 1 -W 2 | head -1)
    # test_domain=$(wget -qO- --header='accept: application/dns-json' "https://cloudflare-dns.com/dns-query?name=$domain&type=A" | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}" | head -1)
    # test_domain=$(curl -sH 'accept: application/dns-json' "https://cloudflare-dns.com/dns-query?name=$domain&type=A" | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}" | head -1)
    if [[ ! $(echo $test_domain | grep $ip) ]]; then
        echo
        echo -e "$red 检测域名解析错误....$none"
        echo
        echo -e " 你的域名: $yellow$domain$none 未解析到: $cyan$ip$none"
        echo
        echo -e " PING 测试结果: $cyan$test_domain$none"
        echo
        echo "备注...如果你的域名是使用 Cloudflare 解析的话..在 DNS 那, 将 (Proxy status / 代理状态), 设置成 (DNS only / 仅限 DNS)"
        echo
        exit 1
    fi
}

install_caddy() {
    # download caddy file then install
    _load download-caddy.sh
    _download_caddy_file
    _install_caddy_service
    caddy_config
    
}
caddy_config() {
    # local email=$(shuf -i1-10000000000 -n1)
    _load caddy-config.sh
    
    # systemctl restart caddy
    do_service restart caddy
}

install_v2ray() {
    $cmd update -y
    if [[ $cmd == "apt-get" ]]; then
        $cmd install -y lrzsz git zip unzip curl wget qrencode libcap2-bin dbus
    else
        # $cmd install -y lrzsz git zip unzip curl wget qrencode libcap iptables-services
        $cmd install -y lrzsz git zip unzip curl wget qrencode libcap
    fi
    ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
    [ -d /etc/v2ray ] && rm -rf /etc/v2ray
    # date -s "$(curl -sI g.cn | grep Date | cut -d' ' -f3-6)Z"
    _sys_timezone
    _sys_time
    
    if [[ $local_install ]]; then
        if [[ ! -d $(pwd)/config ]]; then
            echo
            echo -e "$red 哎呀呀...安装失败了咯...$none"
            echo
            echo -e " 请确保你有完整的上传 233v2 的 V2Ray 一键安装脚本 & 管理脚本到当前 ${green}$(pwd) $none目录下"
            echo
            exit 1
        fi
        mkdir -p /etc/v2ray/233boy/v2ray
        cp -rf $(pwd)/* /etc/v2ray/233boy/v2ray
    else
        pushd /tmp
        git clone https://github.com/xyz690/v2ray -b "$_gitbranch" /etc/v2ray/233boy/v2ray --depth=1
        popd
        
    fi
    
    if [[ ! -d /etc/v2ray/233boy/v2ray ]]; then
        echo
        echo -e "$red 哎呀呀...克隆脚本仓库出错了...$none"
        echo
        echo -e " 温馨提示..... 请尝试自行安装 Git: ${green}$cmd install -y git $none 之后再安装此脚本"
        echo
        exit 1
    fi
    
    # download v2ray file then install
    _load download-v2ray.sh
    _download_v2ray_file
    _install_v2ray_service
    _mkdir_dir
}

config() {
    cp -f /etc/v2ray/233boy/v2ray/config/backup.conf $backup
    cp -f /etc/v2ray/233boy/v2ray/v2ray.sh $_v2ray_sh
    chmod +x $_v2ray_sh
    
    v2ray_id=$uuid
    alterId=0
    ban_bt=true
    if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
        v2ray_dynamicPort_start=${v2ray_dynamic_port_start_input}
        v2ray_dynamicPort_end=${v2ray_dynamic_port_end_input}
    fi
    _load config.sh
    
    # if [[ $cmd == "apt-get" ]]; then
    # 	cat >/etc/network/if-pre-up.d/iptables <<-EOF
    # 		#!/bin/sh
    # 		/sbin/iptables-restore < /etc/iptables.rules.v4
    # 		/sbin/ip6tables-restore < /etc/iptables.rules.v6
    # 	EOF
    # 	chmod +x /etc/network/if-pre-up.d/iptables
    # 	# else
    # 	# 	[ $(pgrep "firewall") ] && systemctl stop firewalld
    # 	# 	systemctl mask firewalld
    # 	# 	systemctl disable firewalld
    # 	# 	systemctl enable iptables
    # 	# 	systemctl enable ip6tables
    # 	# 	systemctl start iptables
    # 	# 	systemctl start ip6tables
    # fi
    # systemctl restart v2ray
    do_service restart v2ray
    backup_config
    
}

backup_config() {
    sed -i "18s/=1/=$v2ray_transport/; 21s/=2333/=$v2ray_port/; 24s/=$old_id/=$uuid/" $backup
    if [[ $v2ray_transport -ge 18 && $v2ray_transport -ne 33 ]]; then
        sed -i "30s/=10000/=$v2ray_dynamic_port_start_input/; 33s/=20000/=$v2ray_dynamic_port_end_input/" $backup
    fi
    if [[ $shadowsocks ]]; then
        sed -i "42s/=/=true/; 45s/=6666/=$ssport/; 48s/=233blog.com/=$sspass/; 51s/=chacha20-ietf/=$ssciphers/" $backup
    fi
    [[ $v2ray_transport == [45] || $v2ray_transport == 33 ]] && sed -i "36s/=233blog.com/=$domain/" $backup
    [[ $caddy ]] && sed -i "39s/=/=true/" $backup
    [[ $ban_ad ]] && sed -i "54s/=/=true/" $backup
    if [[ $is_path ]]; then
        sed -i "57s/=/=true/; 60s/=233blog/=$path/" $backup
        sed -i "63s#=https://liyafly.com#=$proxy_site#" $backup
    fi
}

get_ip() {
    # ip=$(curl -s https://ipinfo.io/ip)
    # [[ -z $ip ]] && ip=$(curl -s https://api.ip.sb/ip)
    # [[ -z $ip ]] && ip=$(curl -s https://api.ipify.org)
    # [[ -z $ip ]] && ip=$(curl -s https://ip.seeip.org)
    # [[ -z $ip ]] && ip=$(curl -s https://ifconfig.co/ip)
    # [[ -z $ip ]] && ip=$(curl -s https://api.myip.com | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}")
    # [[ -z $ip ]] && ip=$(curl -s icanhazip.com)
    # [[ -z $ip ]] && ip=$(curl -s myip.ipip.net | grep -oE "([0-9]{1,3}\.){3}[0-9]{1,3}")
    export "$(wget -4 -qO- https://dash.cloudflare.com/cdn-cgi/trace | grep ip=)" >/dev/null 2>&1
    [[ -z $ip ]] && export "$(wget -6 -qO- https://dash.cloudflare.com/cdn-cgi/trace | grep ip=)" >/dev/null 2>&1
    [[ -z $ip ]] && echo -e "\n$red 获取IP失败, 这垃圾小鸡扔了吧！$none\n" && exit
}

error() {
    
    echo -e "\n$red 输入错误！$none\n"
    
}

pause() {
    
    read -rsp "$(echo -e "按 $green Enter 回车键 $none 继续....或按 $red Ctrl + C $none 取消.")" -d $'\n'
    echo
}
do_service() {
    if [[ $systemd ]]; then
        systemctl $1 $2
    else
        service $2 $1
    fi
}
show_config_info() {
    clear
    _load v2ray-info.sh
    _v2_args
    _v2_info
    _load ss-info.sh
    
}

install() {
    if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then
        echo
        echo " 大佬...你已经安装 V2Ray 啦...无需重新安装"
        echo
        echo -e " $yellow输入 ${cyan}v2ray${none} $yellow即可管理 V2Ray${none}"
        echo
        exit 1
        elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then
        echo
        echo "  如果你需要继续安装.. 请先卸载旧版本"
        echo
        echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}"
        echo
        exit 1
    fi
    v2ray_config
    blocked_hosts
    shadowsocks_config
    install_info
    # [[ $caddy ]] && domain_check
    install_v2ray
    if [[ $caddy || $v2ray_port == "80" ]]; then
        if [[ $cmd == "yum" ]]; then
            [[ $(pgrep "httpd") ]] && systemctl stop httpd
            [[ $(command -v httpd) ]] && yum remove httpd -y
        else
            [[ $(pgrep "apache2") ]] && service apache2 stop
            [[ $(command -v apache2) ]] && apt-get remove apache2* -y
        fi
    fi
    [[ $caddy ]] && install_caddy
    
    ## bbr
    # _load bbr.sh
    # _try_enable_bbr
    
    get_ip
    config
    show_config_info
    
    stop_firewall
}

# 简单粗暴，关闭防火墙
stop_firewall(){
    # 笨笨的检测系统类型方法
    if [[ $(command -v yum) ]] && [[ $(command -v systemctl) ]]; then
        # CentOS
        # 关闭防火墙
        systemctl stop firewalld
        # 设置开机禁用防火墙
        systemctl disable firewalld.service
        echo -e "\n$red 该脚本已自动关闭防火墙... $none\n"
        elif [[ $(command -v apt-get) ]] && [[ $(command -v systemctl) ]] && [[ $(command -v ufw) ]]; then
        # Debian or Ubuntu
        # 关闭防火墙
        ufw disable
        echo -e "\n$red 该脚本已自动关闭防火墙...... $none\n"
    fi
}

uninstall() {
    
    if [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f $backup && -d /etc/v2ray/233boy/v2ray ]]; then
        . $backup
        if [[ $mark ]]; then
            _load uninstall.sh
        else
            echo
            echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}"
            echo
        fi
        
        elif [[ -f /usr/bin/v2ray/v2ray && -f /etc/v2ray/config.json ]] && [[ -f /etc/v2ray/233blog_v2ray_backup.txt && -d /etc/v2ray/233boy/v2ray ]]; then
        echo
        echo -e " $yellow输入 ${cyan}v2ray uninstall${none} $yellow即可卸载${none}"
        echo
    else
        echo -e "
		$red 大胸弟...你貌似毛有安装 V2Ray ....卸载个鸡鸡哦...$none

		备注...仅支持卸载使用我 (233v2) 提供的 V2Ray 一键安装脚本
        " && exit 1
    fi
    
}

args=$1
_gitbranch=$2
[ -z $1 ] && args="online"
case $args in
    online)
        #hello world
        [[ -z $_gitbranch ]] && _gitbranch="master"
    ;;
    local)
        local_install=true
    ;;
    *)
        echo
        echo -e " 你输入的这个参数 <$red $args $none> ...这个是什么鬼啊...脚本不认识它哇"
        echo
        echo -e " 这个辣鸡脚本仅支持输入$green local / online $none参数"
        echo
        echo -e " 输入$yellow local $none即是使用本地安装"
        echo
        echo -e " 输入$yellow online $none即是使用在线安装 (默认)"
        echo
        exit 1
    ;;
esac

clear
while :; do
    echo
    echo "........... V2Ray 一键安装脚本 & 管理脚本 by 233v2 .........."
    echo
    echo "搭建教程: https://git.io/v2ray-doc"
    echo
    echo " 1. 安装"
    echo
    echo " 2. 卸载"
    echo
    if [[ $local_install ]]; then
        echo -e "$yellow 温馨提示.. 本地安装已启用 ..$none"
        echo
    fi
    read -p "$(echo -e "请选择 [${magenta}1-2$none]:")" choose
    case $choose in
        1)
            install
            break
        ;;
        2)
            uninstall
            break
        ;;
        *)
            error
        ;;
    esac
done