bcrypt-node issue #834

b0bw · 2024-12-03T13:49:23Z

Summary

Getting this error on Debian 12

/opt/cronicle/bin/control.sh setup
node:internal/modules/cjs/loader:1137
throw err;
^

Error: Cannot find module 'bcrypt-node'
Require stack:

/opt/cronicle/bin/storage-cli.js
at Module._resolveFilename (node:internal/modules/cjs/loader:1134:15)
at Module._load (node:internal/modules/cjs/loader:975:27)
at Module.require (node:internal/modules/cjs/loader:1225:19)
at require (node:internal/modules/helpers:177:18)
at Object. (/opt/cronicle/bin/storage-cli.js:12:14)
at Module._compile (node:internal/modules/cjs/loader:1356:14)
at Module._extensions..js (node:internal/modules/cjs/loader:1414:10)
at Module.load (node:internal/modules/cjs/loader:1197:32)
at Module._load (node:internal/modules/cjs/loader:1013:12)
at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:128:12) {
code: 'MODULE_NOT_FOUND',
requireStack: [ '/opt/cronicle/bin/storage-cli.js' ]
}

Steps to reproduce the problem

/opt/cronicle/bin/control.sh setup

Your Setup

NodeJs installed.
bcrypt installed.

Operating system and version?

Debian 12

Node.js version?

Node.js v18.19.0

Cronicle software version?

Single server

Are you using the filesystem as back-end storage, or S3/Couchbase?

No

Can you reproduce the crash consistently?

yes

Log Excerpts

jhuckaby · 2024-12-03T17:34:57Z

Very odd. The auto-installer should have taken care of this. Did you install manually or something?

https://github.com/jhuckaby/Cronicle/blob/master/docs/Setup.md#installation

Looks like somehow the npm install command was missed. If you installed using the auto-installer, this SHOULD have happened automatically.

If you installed manually by hand, looks like perhaps a step was missed:

mkdir -p /opt/cronicle
cd /opt/cronicle
curl -L https://github.com/jhuckaby/Cronicle/archive/v1.0.0.tar.gz | tar zxvf - --strip-components 1
npm install # <-- This step here
node bin/build.js dist

Can you try the npm install command again?

b0bw · 2024-12-03T17:46:56Z

No buddy, i used this command after installing requirements.

curl -s https://raw.githubusercontent.com/jhuckaby/Cronicle/master/bin/install.js | node

jhuckaby · 2024-12-03T17:51:58Z

That's really strange. Check the install log for errors maybe?

cat /opt/cronicle/logs/install.log

Also, check the /opt/cronicle/node_modules/ folder to see if bcrypt-node is in there?

ls -l /opt/cronicle/node_modules/bcrypt-node 

total 120
-rw-r--r--  1 root  wheel   1481 Nov 11  2022 LICENSE
-rw-r--r--  1 root  wheel   4371 Nov 11  2022 README.md
-rw-r--r--  1 root  wheel  25423 Nov 11  2022 bCrypt.js
-rw-r--r--  1 root  wheel    248 Nov 11  2022 makefile
-rw-r--r--  1 root  wheel   1262 Nov 11  2022 package.json
drwxr-xr-x  4 root  wheel    128 Nov 11  2022 test
-rw-r--r--  1 root  wheel   1463 Nov 11  2022 test-async.js
-rw-r--r--  1 root  wheel   4108 Nov 11  2022 test-sync.js

Not sure what else to try. I've never encountered NPM failing to install bcrypt before.

Maybe try running the install command again?

mikeTWC1984 · 2024-12-03T18:21:23Z

Perhaps it just trying and failing to install some native modules (not using pre-built binaries). You can try to init some blank npm project "npm init -y" and try to install bcrypt there tocheck for errors. You might be missing python or gcc compiler

b0bw · 2024-12-03T19:25:25Z

cat /opt/cronicle/logs/install.log

Starting install run: Tue Dec 03 2024 13:16:02 GMT+0000 (Greenwich Mean Time)

Cronicle Installer v1.5
Copyright (c) 2015 - 2022 PixlCore.com. MIT Licensed.
Log File: /opt/cronicle/logs/install.log

Fetching release list...
Releases URL: https://api.github.com/repos/jhuckaby/Cronicle/releases
Installing Cronicle v0.9.61...
Tarball URL: https://api.github.com/repos/jhuckaby/Cronicle/tarball/v0.9.61
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
100  335k    0  335k    0     0   121k      0 --:--:--  0:00:02 --:--:--  280k
Installing dependencies...
Executing command: npm install --unsafe-perm
/bin/sh: 1: npm: not found

ERROR: Failed to install dependencies: Error: Command failed: npm install --unsafe-perm
/bin/sh: 1: npm: not found


Starting install run: Tue Dec 03 2024 13:30:34 GMT+0000 (Greenwich Mean Time)

Cronicle Installer v1.5
Copyright (c) 2015 - 2022 PixlCore.com. MIT Licensed.
Log File: /opt/cronicle/logs/install.log

Fetching release list...
Releases URL: https://api.github.com/repos/jhuckaby/Cronicle/releases

Version 0.9.61 is already installed, and is the latest.

I get this error for mikes reply.


ls -l /opt/cronicle/node_modules/bcrypt-node 
ls: cannot access '/opt/cronicle/node_modules/bcrypt-node': No such file or directory

jhuckaby · 2024-12-03T19:25:36Z

Ah, here's our problem:

ERROR: Failed to install dependencies: Error: Command failed: npm install --unsafe-perm
/bin/sh: 1: npm: not found

So when you installed Node.js, somehow the NPM binary didn't get installed. It's supposed to come with Node.js, but in this case it didn't go in for some reason.

Try reinstalling Node.js from a package manager maybe?

curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash -
sudo apt install -y nodejs

This should install NPM as well as Node.js.

b0bw · 2024-12-03T19:32:43Z

After running

curl -fsSL https://deb.nodesource.com/setup_20.x | sudo -E bash -
sudo apt install -y nodejs

I got

/opt/cronicle/bin/control.sh start
/opt/cronicle/bin/control.sh start: Starting up Cronicle Server...
node:internal/modules/cjs/loader:1228
  throw err;
  ^

Error: Cannot find module 'pixl-server'
Require stack:
- /opt/cronicle/lib/main.js
    at Module._resolveFilename (node:internal/modules/cjs/loader:1225:15)
    at Module._load (node:internal/modules/cjs/loader:1051:27)
    at Module.require (node:internal/modules/cjs/loader:1311:19)
    at require (node:internal/modules/helpers:179:18)
    at Object.<anonymous> (/opt/cronicle/lib/main.js:13:18)
    at Module._compile (node:internal/modules/cjs/loader:1469:14)
    at Module._extensions..js (node:internal/modules/cjs/loader:1548:10)
    at Module.load (node:internal/modules/cjs/loader:1288:32)
    at Module._load (node:internal/modules/cjs/loader:1104:12)
    at Function.executeUserEntryPoint [as runMain] (node:internal/modules/run_main:173:12) {
  code: 'MODULE_NOT_FOUND',
  requireStack: [ '/opt/cronicle/lib/main.js' ]
}

Node.js v20.18.1
/opt/cronicle/bin/control.sh start: Cronicle Server could not be started

jhuckaby · 2024-12-03T19:36:10Z

Sorry, I should have clarified. Since Node.js wasn't properly installed on your server (until now), you will have to start over at the beginning, because none of the dependencies were installed by NPM. So, please try the Cronicle install steps one last time:

curl -s https://raw.githubusercontent.com/jhuckaby/Cronicle/master/bin/install.js | node

Then run the setup:

/opt/cronicle/bin/control.sh setup

Then finally you can start the service:

/opt/cronicle/bin/control.sh start

https://github.com/jhuckaby/Cronicle/blob/master/docs/Setup.md#installation

Sorry this is so confusing. I'll try to make this all easier in v2.

b0bw · 2024-12-03T19:56:10Z

I got from jhuckaby


 curl -s https://raw.githubusercontent.com/jhuckaby/Cronicle/master/bin/install.js | node

Cronicle Installer v1.5
Copyright (c) 2015 - 2022 PixlCore.com. MIT Licensed.
Log File: /opt/cronicle/logs/install.log

Fetching release list...

Version 0.9.61 is already installed, and is the latest.

jhuckaby · 2024-12-03T20:01:59Z

Oh dear god, of course. It thinks the latest is installed (it was "half-installed"), so it doesn't try to reinstall, UGH!!!!

What a mess, I'm so sorry 😞

I think we'll need to wipe out the install, so it reinstalls from scratch. If you have customized the /opt/cronicle/config.json file, please copy this to a temp location:

sudo cp /opt/cronicle/conf/config.json /tmp/

Then wipe it all out:

sudo rm -rf /opt/cronicle

Then finally, you can do the reinstall steps, from the top:

https://github.com/jhuckaby/Cronicle/blob/master/docs/Setup.md#installation

Then you can copy your temp config file back into place, if needed:

sudo mv /tmp/config.json /opt/cronicle/conf/config.json

I'm SO sorry this is so confusing and silly. I will work on improving these installation steps and rewrite the installation documentation, with full Node.js install steps included, so people won't run into this situation in the future.

Huge apologies.

b0bw · 2024-12-03T20:11:14Z

Worked. Legend thank you.

b0bw · 2024-12-03T20:17:35Z

I keep getting this error on a script thats ran in the past.


#!/bin/sh
firefox-esr https://stackoverflow.com

Have I done something wrong?

jhuckaby · 2024-12-03T20:20:30Z

Can't see the error in these screenshots. Please click on one of the failed job IDs, to see what the actual error message is:

b0bw · 2024-12-03T20:25:13Z

see attached.

jhuckaby · 2024-12-03T20:31:47Z

Okay, so this looks like an issue with your firefox-esr program:

Error: no DISPLAY environment variable specified

I don't know anything about this, but I'm guessing it's some sort of headless browser automation system akin to Puppeteer or Playright?

I threw this over to ChatGPT 4o to get some more insight:

That error indicates that the firefox-esr program is trying to start in graphical (GUI) mode, but it cannot find an active X server to connect to. The DISPLAY environment variable tells graphical applications which display to use for rendering their windows. Without it, graphical programs cannot start.

Fixing the Issue

Option 1: Use xvfb-run to Emulate a Display

If firefox-esr needs to run in a graphical environment, you can use xvfb-run, a utility that provides a virtual framebuffer X server. This allows graphical applications to run headlessly (without a physical display).

Install xvfb (if not already installed):
• On Debian/Ubuntu:

sudo apt-get install xvfb

Then Run your job with xvfb-run:

xvfb-run firefox-esr

Option 2: Use Headless Mode

Modern versions of Firefox (including ESR) support a “headless” mode for running without a graphical environment. Check if your firefox-esr supports this feature by running:

firefox-esr --headless

Option 3: Set the DISPLAY Environment Variable

export DISPLAY=:0
firefox-esr

Good luck!

jhuckaby · 2024-12-03T20:38:15Z

I keep getting this error on a script thats ran in the past.

If the job ran successfully in the past, I am guessing that Cronicle was previously started with the DISPLAY environment variable already set. This variable then "stuck" in memory and propagated down to the jobs that it launched. But this time, today, when you reinstalled and restarted Cronicle, you may have been in a different context (i.e. different terminal environment, SSH instead of direct console, etc.). where the environment variable wasn't set.

Adding export DISPLAY=:0 or something like it to your shell script should help, or alternatively you can add environment variables in the job_env configuration property for ALL jobs to inherit:

https://github.com/jhuckaby/Cronicle/blob/master/docs/Configuration.md#job_env

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

bcrypt-node issue #834

bcrypt-node issue #834

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

mikeTWC1984 commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024 •

edited

Loading

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024 •

edited

Loading

b0bw commented Dec 3, 2024

b0bw commented Dec 3, 2024 •

edited

Loading

jhuckaby commented Dec 3, 2024 •

edited

Loading

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

bcrypt-node issue #834

bcrypt-node issue #834

Comments

b0bw commented Dec 3, 2024

Summary

Steps to reproduce the problem

Your Setup

Operating system and version?

Node.js version?

Cronicle software version?

Are you using the filesystem as back-end storage, or S3/Couchbase?

Can you reproduce the crash consistently?

Log Excerpts

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

mikeTWC1984 commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024 • edited Loading

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024 • edited Loading

b0bw commented Dec 3, 2024

b0bw commented Dec 3, 2024 • edited Loading

jhuckaby commented Dec 3, 2024 • edited Loading

b0bw commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

jhuckaby commented Dec 3, 2024

b0bw commented Dec 3, 2024 •

edited

Loading

jhuckaby commented Dec 3, 2024 •

edited

Loading

b0bw commented Dec 3, 2024 •

edited

Loading

jhuckaby commented Dec 3, 2024 •

edited

Loading