You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
<INAV 7.1 flashed to Mamba F405 DJI mini stack with Mamba F35 4 in 1 esc using Mamba F405US as target. On motor test motors 1, 2 and 3 all spin up ok. Motor 4 does not move. Same issue on INAV 6.1.1. Both Dshot 300 and 600 selected in config.
All esc's appear ok in BL Heli configurator
If I reflash Betaflight to the flight controller all 4 motors spin as expected when tested>
INAV/MAMBAF405US 7.1.1 May 6 2024 / 11:57:17 (dd91a87)
GCC-10.3.1 20210824 (release)
FC Board name and vendor:
INAV version string:
The text was updated successfully, but these errors were encountered:
rcflyers
changed the title
Mamba F405 DJI mini - only 3 motors spin
Mamba F405 DJI mini - only 3 motors spin on INAV 7.1 and other versions
May 11, 2024
Current Behavior
<INAV 7.1 flashed to Mamba F405 DJI mini stack with Mamba F35 4 in 1 esc using Mamba F405US as target. On motor test motors 1, 2 and 3 all spin up ok. Motor 4 does not move. Same issue on INAV 6.1.1. Both Dshot 300 and 600 selected in config.
All esc's appear ok in BL Heli configurator
If I reflash Betaflight to the flight controller all 4 motors spin as expected when tested>
Steps to Reproduce
Expected behavior
<All 4 motors to work>
Suggested solution(s)
Suggested solution(s)
Additional context
https://drive.google.com/file/d/1QOlckp6i2WwzC6e0GXxA5d1n2Hh5I3PH/view?usp=sharing
# version
INAV/MAMBAF405US 7.1.1 May 6 2024 / 11:57:17 (dd91a87)
GCC-10.3.1 20210824 (release)
The text was updated successfully, but these errors were encountered: