Ch12-1_aircleaner.ino

#include <ESP8266WiFi.h>
#include <PubSubClient.h>

#define AIR_PIN 14

const char* ssid = "                       ";
const char* password = "                         ";
const char* mqtt_server = "13.209.250.27";
const char* topic = "speak_topic";

WiFiClient espClient;
PubSubClient client(espClient);

long lastMsg = 0;
char msg[50];
int value = 0;

void setup_wifi() {
  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  randomSeed(micros());

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}

void callback(char* topic, byte* payload, unsigned int length) {
  String final_string;

  Serial.print("Message arrived [");
  Serial.print(topic);
  Serial.print("] ");
  for (int i = 0; i < length; i++) {
    Serial.print((char)payload[i]);
    final_string += (char)payload[i];  
  }
 
  Serial.println();
  Serial.println("-----------------------------------------");
  Serial.println(final_string);
  // Switch on the LED if an 1 was received as first character
  // fix it - magiceco//
  if (final_string == "1") {
    //digitalWrite(BUILTIN_LED, LOW);   // Turn the LED on (Note that LOW is the voltage level
    digitalWrite(AIR_PIN, LOW);
    // but actually the LED is on; this is because
    // it is acive low on the ESP-01)
  } 
  else if(final_string == "2") {
    //digitalWrite(BUILTIN_LED, HIGH);// Turn the LED off by making the voltage HIGH 
    digitalWrite(AIR_PIN, HIGH);
  }

}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Create a random client ID
    String clientId = "ESP8266Client-";
    clientId += String(random(0xffff), HEX);
    // Attempt to connect
    if (client.connect(clientId.c_str())) {
      Serial.println("connected");
      // Once connected, publish an announcement...
      client.publish("outTopic", "hello world");
      // ... and resubscribe
      client.subscribe(topic);
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void setup() {
  Serial.begin(115200);
  pinMode(AIR_PIN, OUTPUT);
  digitalWrite(AIR_PIN, LOW);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  client.setCallback(callback);
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
  long now = millis();
  if (now - lastMsg > 2000) {
    lastMsg = now;
    ++value;
    snprintf (msg, 75, "hello world #%ld", value);
    Serial.print("Publish message: ");
    Serial.println(msg);
    client.publish("outTopic", msg);
  }
}