Issue with Tethered Capture: Photos Not Saving to Camera's SD Card

[Moseaca]

I am experiencing the following issue:

When I try to activate gphoto2 --capture-tethered, the camera does not save the images to the card, which starts blinking. The photos remain in a "saving" state but are not stored on the card, even when I remove the cable.

The capturetarget is set to 1.

What's strange is that when I started this project a few months ago (February), it worked perfectly without any problems. Now, this issue is happening. I need support, please, this is really important. I am attaching the log.

gphoto2_debug.txt

I have tried different types of cables, different Raspberry Pi models, different OS versions, various SD/CF cards, and different Canon cameras, but it still doesn't work.

The system should simply allow tethering, and when I take a picture, the photos should be saved with the filename on both the card and the Raspberry Pi.

Has anyone else encountered this issue? I also tried using only libgphoto2 with a C code, and in that case, the photos remain in the buffer, but when I remove the cable, they are then saved to the card.

Thank you in advance. I am going crazy.

its very important.
A clear and concise description of what the bug is.

Canon 1dx mark2 - Canon 5d mark4
If this is camera specific, include the camera name as shown by gphoto2 --auto-detect or USB IDs

This version of gphoto2 is using the following software versions and options:
gphoto2 2.5.28 gcc, popt(m), exif, cdk, aa, jpeg, readline
libgphoto2 2.5.30 standard camlibs, gcc, no ltdl, EXIF
libgphoto2_port 0.12.1 iolibs: disk ptpip serial usb1 usbdiskdirect usbscsi, gcc, no ltdl, EXIF, USB, serial without locking

also installed libgphoto2 2.5.31.1

To Reproduce
gphoto2 --set-config capturetarget=1
gphoto2 --capture-tethered

gphoto2_debug.txt

[Moseaca]

Just to help who has the same problem.

seems that the problem was the WTF/wireless transfer setting of the canon camera in communication tab

PUT Autotransfer OFF and don't use the SET button to send pictures.

I hope that can help u.

bye.

[Rajat369jain]

That also not solved the problem does in capture-tethered mode using ptpip we can save images to both camera card as well in raspberry pi or not

[msmeissn]

If you want to keep it in the camera AND download it, try:

gphoto2 --capture-tethered --keep

[Rajat369jain]

But this also not solve the problem the photo is saving directly in raspberry pi and not in camera as well when connected with PTP/IP protocol in capture tethered mode even with --keep does PTP/IP protocol supports saving images to both location if yes does some camera do not support it or some other reason for it