Skip to content

Latest commit

 

History

History
458 lines (349 loc) · 14.8 KB

Programming-Guide.md

File metadata and controls

458 lines (349 loc) · 14.8 KB

mtail Programming Guide

Introduction

mtail is very simple and thus limits what is possible with metric manipulation, but is very good for getting values into the metrics. This page describes some common patterns for writing useful mtail programs.

Changing the exported variable name

mtail only lets you use "C"-style identifier names in the program text, but you can rename the exported variable as it gets presented to the collection system if you don't like that.

counter connection_time_total as "connection-time_total"

Reusing pattern pieces

If the same pattern gets used over and over, then define a constant and avoid having to check the spelling of every occurrence.

# Define some pattern constants for reuse in the patterns below.
const IP /\d+(\.\d+){3}/
const MATCH_IP /(?P<ip>/ + IP + /)/

...

    # Duplicate lease
    /uid lease / + MATCH_IP + / for client .* is duplicate on / {
        duplicate_lease++
    }

Parse the log line timestamp

mtail attributes a timestamp to each event.

If no timestamp exists in the log and none explicitly parsed by the mtail program, then mtail will use the current system time as the time of the event.

Many log files include the timestamp of the event as reported by the logging program. To parse the timestamp, use the strptime function with a Go time.Parse layout string.

/^(?P<date>\w+\s+\d+\s+\d+:\d+:\d+)\s+[\w\.-]+\s+sftp-server/ {
    strptime($date, "Jan _2 15:04:05")

Don't try to disassemble timestamps into component parts (e.g. year, month, day) separately. Keep them in the same format as the log file presents them and change the strptime format string to match it.

/^/ +
/(?P<date>\d{4}\/\d{2}\/\d{2} \d{2}:\d{2}:\d{2}) / +
/.*/ +
/$/ {
    strptime($date, "2006/01/02 15:04:05")

N.B. If no timestamp parsing is done, then the reported timestamp of the event may add some latency to the measurement of when the event really occurred. Between your program logging the event, and mtail reading it, there are many moving parts: the log writer, some system calls perhaps, some disk IO, some more system calls, some more disk IO, and then mtail's virtual machine execution. While normally negligible, it is worth stating in case users notice offsets in time between what mtail reports and the event really occurring. For this reason, it's recommended to always use the log file's timestamp if one is available.

Repeating common timestamp parsing

The decorator syntax was designed with common timestamp parsing in mind. It allows the code for getting the timestamp out of the log line to be reused and make the rest of the program text more readable and thus maintainable.

# The `syslog' decorator defines a procedure.  When a block of mtail code is
# "decorated", it is called before entering the block.  The block is entered
# when the keyword `next' is reached.
def syslog {
    /(?P<date>(?P<legacy_date>\w+\s+\d+\s+\d+:\d+:\d+)|(?P<rfc3339_date>\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}.\d+[+-]\d{2}:\d{2}))/ +
        /\s+(?:\w+@)?(?P<hostname>[\w\.-]+)\s+(?P<application>[\w\.-]+)(?:\[(?P<pid>\d+)\])?:\s+(?P<message>.*)/ {
        # If the legacy_date regexp matched, try this format.
        len($legacy_date) > 0 {
            strptime($legacy_date, "Jan _2 15:04:05")
        }
        # If the RFC3339 style matched, parse it this way.
        len($rfc3339_date) > 0 {
            strptime($rfc3339_date, "2006-01-02T15:04:05-07:00")
        }
        # Call into the decorated block
        next
    }
}

This can be used around any blocks later in the program.

@syslog {
/foo/ {
  ...
}

/bar/ {
}
} # end @syslog decorator

Both the foo and bar pattern actions will have the syslog timestamp parsed from them before being called.

Timestamps with strange characters in them

Go's time.Parse does not like underscores in the format string, which may happen when one is attempting to parse a timestamp that does have underscores in the format. Go treats the underscore as placeholding an optional digit.

To work around this, you can use subst() to rewrite the timestamp before parsing:

/(\d{4}-\d{2}-\d{2}_\d{2}:\d{2}:\d{2}) / {
  strptime(subst("_", " ", $1), "2006-01-02 15:04:05")
}

Note the position of the underscore in the regular expression match.

Conditional structures

The /pattern/ { action } idiom is the normal conditional control flow structure in mtail programs.

If the pattern matches, then the actions in the block are executed. If the pattern does not match, the block is skipped.

The else keyword allows the program to perform action if the pattern does not match.

/pattern/ {
  action
} else {
  alternative
}

The example above would execute the "alternative" block if the pattern did not match the current line.

The otherwise keyword can be used to create control flow structure reminiscent of the C switch statement. In a containing block, the otherwise keyword indicates that this block should be executed only if no other pattern in the same scope has matched.

{
/pattern1/ { _action1_ }
/pattern2/ { _action2_ }
otherwise { _action3_ }
}

In this example, "action3" would execute if both pattern1 and pattern2 did not match the current line.

Explicit matching

The above /pattern/ { _action_ } form implicitly matches the current input log line.

If one wants to match against another string variable, one can use the =~ operator, or to negate the match the !~, like so:

  $1 =~ /GET/ {
    ...
  }

Storing intermediate state

Hidden metrics are metrics that can be used for internal state and are never exported outside of mtail. For example if the time between pairs of log lines needs to be computed, then a hidden metric can be used to record the timestamp of the start of the pair.

Note that the timestamp builtin requires that the program has set a log line timestamp with strptime or settime before it is called.

hidden gauge connection_time by pid
...

  # Connection starts
  /connect from \S+ \(\d+\.\d+\.\d+\.\d+\)/ {
    connections_total++

    # Record the start time of the connection, using the log timestamp.
    connection_time[$pid] = timestamp()
  }

...

  # Connection summary when session closed
  /sent (?P<sent>\d+) bytes  received (?P<received>\d+) bytes  total size \d+/ {
    # Sum total bytes across all sessions for this process
    bytes_total["sent"] += $sent
    bytes_total["received"] += $received

    # Count total time spent with connections open, according to the log timestamp.
    connection_time_total += timestamp() - connection_time[$pid]

    # Delete the datum referenced in this dimensional metric.  We assume that
    # this will never happen again, and hint to the VM that we can garbage
    # collect the memory used.
    del connection_time[$pid]
  }

In this example, the connection timestamp is recorded in the hidden variable connection_time keyed by the "pid" of the connection. Later when the connection end is logged, the delta between the current log timestamp and the start timestamp is computed and added to the total connection time.

In this example, the average connection time can be computed in a collection system by taking the ratio of the number of connections (connections_total) over the time spent (connection_time_total). For example in Prometheus one might write:

connection_time_10s_moving_avg =
  rate(connections_total[10s])
    / on job
  rate(connection_time_total[10s])

Note also that the del keyword is used to signal to mtail that the connection_time value is no longer needed. This will cause mtail to delete the datum referenced by that label from this metric, keeping mtail's memory usage under control and speeding up labelset search time (by reducing the search space!)

Alternatively, the statement del connection_time[$pid] after 72h would do the same, but only if connection_time[$pid] is not changed for 72 hours. This form is more convenient when the connection close event is lossy or difficult to determine.

See state for more information.

Computing moving averages

mtail deliberately does not implement complex mathematical functions. It wants to process a log line as fast as it can. Many other products on the market already do complex mathematical functions on timeseries data, like Prometheus and Riemann, so mtail defers that responsibility to them. (Do One Thing, and Do It Pretty Good.)

But say you still want to do a moving average in mtail. First note that mtail has no history available, only point in time data. You can update an average with a weighting to make it an exponential moving average (EMA).

gauge average

/some (\d+) match/ {
  # Use a smoothing constant 2/(N + 1) to make the average over the last N observations
  average = 0.9 * $1 + 0.1 * average
}

However this doesn't take into account the likely situation that the matches arrive irregularly (the time interval between them is not constant.) Unfortunately the formula for this requires the exp() function (e^N) as described here: http://stackoverflow.com/questions/1023860/exponential-moving-average-sampled-at-varying-times . I recommend you defer this computation to the collection system

Histograms

Histograms are preferred over averages in many monitoring howtos, blogs, talks, and rants, in order to give the operators better visibility into the behaviour of a system.

mtail supports histograms as a first class metric kind, and should be created with a list of bucket boundaries:

histogram foo buckets 1, 2, 4, 8

creates a new histogram foo with buckets for ranges [0-1), [1-2), [2-4), [4-8), and from 8 to positive infinity.

NOTE: The 0-n and m-+Inf buckets are created automatically.

You can put labels on a histogram as well: histogram apache_http_request_time_seconds buckets 0.005, 0.01, 0.025, 0.05 by server_port, handler, request_method, request_status, request_protocol

At the moment all bucket boundaries (excepting 0 and positive infinity) need to be explicitly named (there is no shorthand form to create geometric progressions).

Assignment to the histogram records the observation: ### # HTTP Requests with histogram buckets. # apache_http_request_time_seconds[$server_port][$handler][$request_method][$request_status][$request_protocol] = $time_us / 1000000

In tools like Prometheus these can be manipulated in aggregate for computing percentiles of response latency.

apache_http_request_time:rate10s = rate(apache_http_request_time_seconds_bucket[10s])
apache_http_request_time_count:rate10s = rate(apache_http_request_time_seconds_count[10s])


apache_http_request_time:percentiles =
  apache_http_request_time:rate10s
    / on (job, port, handler, request_method, request_status, request_protocol)
  apache_http_request_time_seconds_count:rate10s

This new timeseries can be plotted to see the percentile bands of each bucket, for example to visualise the distribution of requests moving between buckets as the performance of the server changes.

Further, these timeseries can be used for Service Level-based alerting (a technique for declaring what a defensible service level is based on the relative costs of engineering more reliability versus incident response, maintenance costs, and other factors), as we can now see what percentage of responses fall within and without a predefined service level:

apache_http_request_time:latency_sli =
  apache_http_request_time:rate10s{le="200"}
    / on (job, port, handler, request_method, request_status, request_protocol)
  apache_http_request_time_seconds_count:rate10s

ALERT LatencyTooHigh
IF apache_http_request_time:latency_sli < 0.555555555
LABELS { severity="page" }
ANNOTATIONS {
  summary = "Latency is missing the service level objective"
  description = "Latency service level indicator is {{ $value }}, which is below nine fives SLO."
}

In this example, prometheus computes a service level indicator of the ratio of requests at or below the target of 200ms against the total count, and then fires an alert if the indicator drops below nine fives.

Parsing number fields that are sometimes not numbers

Some logs, for example Varnish and Apache access logs, use a hyphen rather than a zero.

You may be tempted to use a programme like

counter total

/^[a-z]+ ((?P<response_size>\d+)|-)$/ {
  $response_size > 0 {
    total = $response_size
  }
}

to parse a log like

a 99
b -

except that mtail will issue a runtime error on the second line like Runtime error: strconv.ParseInt: parsing "": invalid syntax.

This is because in this programme the capture group is only matching on a set of digits, and is not defined when the alternate group matches (i.e. the hyphen).

Instead one can test the value of the surrounding capture group and do nothing if the value matches a hyphen:

counter total

/^[a-z]+ ((?P<response_size>\d+)|-)$/ {
  $1 != "-" {
    total = $response_size
  }
}

mtail does not presently have a way to test if a capture group is defined or not.

Parsing numbers with extra characters

Some logs contain human readable numbers, inserting thousands-separators (comma or full stop depending on your locale.) You can remove them with the subst function:

/sent (?P<sent>[\d,]+) bytes  received (?P<received>[\d,]+) bytes/ {
    # Sum total bytes across all sessions for this process
    bytes_total["sent"] += int(subst(",", "", $sent))
    bytes_total["received"] += int(subst(",", "", $received))
}

As subst is of type String, the type inference will assign a Text type to bytes total, so here we must explicitly instruct mtail that we are expecting this to be an Int by using the int cast function.

Avoiding unnecessary work

You can stop the program if it's fed data from a log file you know you want to ignore:

getfilename() !~ /apache.access.?log/ {
  stop
}

This will check to see if the input filename looks like the regular expression pattern apache.access.?log, i.e. matching /var/log/apache/accesslog, and not attempt any further pattern matching on the log line if it doesn't.

Canonicalising keys

Some logs like webserver logs describe common elements with unique identifiers in them, which can result in lots of metric keys and no useful count if left alone. To rewrite these capture groups, use subst() with a pattern as the first argument:

hidden text route
counter http_requests_total by method, route

/(?P<method\S+) (?P<url>\S+)/ {
  route = subst(/\/d+/, "/:num", $url)
  http_requests_total[method][route]++
}

Here we replace any number part following a / in the $url capture group with the literal string /:num, so we end up counting only the static part of a URL route.