diff --git a/cells/gf180mcu_fd_ip_sram__sram256x8m8wm1/specs/1_pins_desc.csv b/cells/gf180mcu_fd_ip_sram__sram256x8m8wm1/specs/1_pins_desc.csv
index 4859265..d75737e 100644
--- a/cells/gf180mcu_fd_ip_sram__sram256x8m8wm1/specs/1_pins_desc.csv
+++ b/cells/gf180mcu_fd_ip_sram__sram256x8m8wm1/specs/1_pins_desc.csv
@@ -11,7 +11,7 @@ memory is enabled. When CEN input is High, the
 memory is deactivated but internal states are
 
 retained. CEN must be high before 1st running cycle."
-A[6:0],Input,"Address Input. This Address input port is used to
+A[7:0],Input,"Address Input. This Address input port is used to
 
 address the location to be written during the write
 
diff --git a/cells/gf180mcu_fd_ip_sram__sram512x8m8wm1/specs/1_pins_desc.csv b/cells/gf180mcu_fd_ip_sram__sram512x8m8wm1/specs/1_pins_desc.csv
index 4859265..8565bc5 100644
--- a/cells/gf180mcu_fd_ip_sram__sram512x8m8wm1/specs/1_pins_desc.csv
+++ b/cells/gf180mcu_fd_ip_sram__sram512x8m8wm1/specs/1_pins_desc.csv
@@ -11,7 +11,7 @@ memory is enabled. When CEN input is High, the
 memory is deactivated but internal states are
 
 retained. CEN must be high before 1st running cycle."
-A[6:0],Input,"Address Input. This Address input port is used to
+A[8:0],Input,"Address Input. This Address input port is used to
 
 address the location to be written during the write
 
diff --git a/cells/gf180mcu_fd_ip_sram__sram64x8m8wm1/specs/1_pins_desc.csv b/cells/gf180mcu_fd_ip_sram__sram64x8m8wm1/specs/1_pins_desc.csv
index 4859265..2667381 100644
--- a/cells/gf180mcu_fd_ip_sram__sram64x8m8wm1/specs/1_pins_desc.csv
+++ b/cells/gf180mcu_fd_ip_sram__sram64x8m8wm1/specs/1_pins_desc.csv
@@ -11,7 +11,7 @@ memory is enabled. When CEN input is High, the
 memory is deactivated but internal states are
 
 retained. CEN must be high before 1st running cycle."
-A[6:0],Input,"Address Input. This Address input port is used to
+A[5:0],Input,"Address Input. This Address input port is used to
 
 address the location to be written during the write