TRÅDFRI bulb GU10, warm white, 400 lm
This seems to be the successor of the LED1650R5.
- Socket: GU10
- Potted: no
- Glued: yes (lens cover)
- TRÅDFRI Module: ICC-A-1
Use a hot air gun to soften the glue that holds the lens to the glass body. Make sure that you heat it up evenly, otherwise the glass will crack. Then use a small blade to lift up the lens (which has small hooks as well).
You can also heat it up in an oven to heat it up evenly. I tried 150 degrees Celsius with success.
The LED PCB can be removed by removing the two screws and lifting it up with a square hook or similar. The heatspreader is glued with white glue (thermal paste?) to the glass housing. I removed it by re-inserting the screw and then lifting it with pliers. Do this carefully, or you might cut yourself (been there, done that).
The PCB is press-fitted into the GU10 pins. To remove the whole PCB, use a side cutter and carefully clamp perpendicular to the dots on the GU10 pins (don't try to cut them!). A little pressure makes it then possible to lift the PCB from the GU10 pins.
- PB13 -> LED driver