Releases: argoproj/argo-rollouts
0.7.2
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.7.2/manifests/install.yaml
Changes since v0.7.1
Rollouts
- Update RS if RS's annotations need to be changed #413
v0.7.1
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.7.1/manifests/install.yaml
Changes since v0.7.0
General
- Adding ca-certificates to docker image (#393)
- Add patchMergeKey and patchStrategy struct tags and comments (#386)
- Reduce log from error to warning (#394)
Experiments
v0.7.0
v0.7.0
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.7.0/manifests/install.yaml
Important Notices
- Please upgrade to v0.6.x before upgrading to v0.7. Pre v0.6.0 has a different pausing logic, and v0.7.0 removes the depreciated PauseStartTime field. The v0.6.x versions have a migration script that is removed in v0.7.0.
- This release introduces an alpha implementation of Rollouts leveraging Istio resources for traffic shaping. Check out traffic management for more info.
Changes since v0.6.3
General
- Support instance ids for rollout controller segregation #342
- Remove PauseStartTime #349
- Vendor mockery utility #347
- Remove loud log message #333
Rollouts
General
- Add stableService field #337
Traffic Routing
- Initial Istio implementation #341
- Implement watch for Istio resources #354
- Add validation to istio virtual services #355
Kubectl Plugin
- Introduce 'kubectl argo rollouts terminate' command #297
Analysis
Genernal
- Allow controller to delay analysis #350
- Create one background analysis per revision #309
- Allow AnalysisRun to complete an experiment #345
Providers
v0.6.3
v0.6.3
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.6.3/manifests/install.yaml
Changes since v0.6.2
Bug Fixes
v0.6.2
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.6.2/manifests/install.yaml
Bug Fixes
v0.6.1
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.6.1/manifests/install.yaml
Changes since v0.6.0
Bug Fixes
- Create one background analysis per revision (#309)
- Fix Infinite loop with PreviewReplicaCount set (#308)
- Fix a delete by zero in get command (#310)
- Set StableRS hash to current if replicaset does not actually exist (#320)
- Bluegreen: allow preview service/replica sets to be replaced and fix sg fault in syncReplicasOnly (#314)
v0.6.0
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.6.0/manifests/install.yaml
Important Notices
- The pause functionality was reworked in the v0.6 release. Previously, the
.spec.paused
field was used by the controller to pause rollouts. However, this was an issue for users who wanted to manually pause the rollout since the controller assumed it was the only entity that set the field. In v0.6, the controller will add a pause condition to the.status.pauseCondition
to pause a controller instead of settingspec.paused
. The pause condition has a start time and a reason explaining why it paused. This allows users to set thespec.paused
field manually and let the controller respect that pause. The v0.6 controller has a migration function to convert pre v0.6 rollouts to the new pause condition. The migration function will be removed in a future release. - In pre-v0.6 versions, the BlueGreen strategy would have the preview service point at no ReplicaSets if the new ReplicaSet was receiving traffic from the active service. V0.6 changes that behavior to make the preview service always point at the latest ReplicaSet
Changes since v0.5.0
General
- Update k8s library dependencies to v1.16 (##192)
Rollouts
Enhancements
- Add Rollout Context to reconciliation loop (##205)
- Refactor pausing (##211)
- Allow User pause (##216)
- Stop progress while paused (##193)
- Add pause condition migration (##229)
- Add abort functionality (##224)
- Rollout analysis plumbing (##183)
- Add AnalysisStep for Rollouts (##188)
- Add background analysis runs for rollouts (##196)
- Clean up old Background AnalysisRuns (##246)
- Clean up Experiments and AnalysisRuns (##197)
- Add initial Experiment Step (##165)
- Make specifying replicas/duration optional in the experiment step (##241)
- Terminate experiments from previous steps (##280)
- Add Analysis to RolloutExperimentStep (##238)
- Fix TimeOut check to consider experiment/analysis steps (##278)
- Pause a rollout upon inconclusive experiment (##256)
- Abort a rollout upon a failed experiment (##256)
- Add create AnalysisRun action in clusterrole (##231)
Bug Fixes
- Fix nil ptr for newRS (##233)
- Fix Rollout transformer config (##247)
- Always point preview service at the newRS (##217)
- Make active service required (##235)
- Reset ProgressDeadline on retry (##282)
- Ignore old running rs for RolloutCompleted status (##218)
- Remove scale down annot after scaling down (##187)
- Renames golang field names for blueGreen/canary to eliminate two API violations (##206)
Experiments
Check out the Experiment Docs for more information.
Enhancements
- Refactor experiments to use a context object (##208)
- Allow selectors to be overwritten when starting experiments (##249)
- Simplify experiment replicaset names (##274)
- Integrate Experiments with Analysis (##210)
Bug Fixes
- Fix experiment enqueue logic (##239)
- Annotate instead of label experiment names in replicasets (##262)
- Fix issue where a replicaset name collision could cause hot loop (##236)
Analysis
Check out the Analysis Docs for more information.
Enhancements
- AnalysisRun AnalysisTemplate Spec (##166)
- Initial analysis controller implementation (##168)
- Integrate analysis controller with provider interfaces (##171)
- Add metric knob for maxInconclusive (##181)
- Simplify provider interfaces to set error messages (##189)
- Implement ResumeAt logic (##232)
- Define explict args in AnalysisTemplates and simplify AnalysisRun spec (##283)
- Use a duration string instead of int to represent duration (##286)
- Truncate measurements when greater than default (10) (##191)
- Add counter for consecutiveError (##191)
Prometheus Provider
- Add initial provider and Prometheus implementation (##170)
- Rename prometheus.server to address to better reflect API client interface (##207)
- Treat NaN as inconclusive on Prometheus provider (##275)
Job Provider
- Implement job-based metric provider (##186)
- Job metric argument substitution. Simplify metric provider interface (##268)
Kayenta Provider
- Initialize check in for kayenta metric provider ##284
Kubectl Plugin
Check out the kubectl plugin docs for more information.
Enhancements
- Implement argo rollouts kubectl plugin (##195)
- Introduce
kubectl argo rollout list rollouts
command (##204) - Introduce
kubectl argo rollout list experiments
command (##267) - Introduce
kubectl argo rollout set image
command (##251) - Introduce
kubectl argo rollout get
command (##230) - Introduce
kubectl argo rollout promote
command (##277) - Add ability to
kubectl argo rollouts set image *=myrepo/myimage
(##290) - Add
get/retry experiment
commands. Support experiment retries (##263) - Show running jobs as part of analysis runs (##278)
- Surface experiment images to CLI (##274)
v0.5.0
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.5.0/manifests/install.yaml
Changes since v0.4.2
Bug Fixes
- Rollout deletionTimestamp are not honored (#109)
- status.availableReplicas should not count old stacks (#143)
- Fix Infinitely loop on controller loop (#146)
Enhancements
- Fast rollback in BlueGreen during scale down period #127
- Attach independent scaleDownDelays to older ReplicaSets #145
- Add scaleDownDelayRevisionLimit to limit the number of old ReplicaSets scaled up #129
Experiment CRD
This release of Argo Rollouts introduces the experiment CRD. The experiment CRD allows users to define multiple PodSpec's to run for a specific duration of time. This will help enable the Kayenta use-case where a user will need to start two versions of their application at the same time. Otherwise, the users cannot have an apples-to-apples comparison of these two versions as one will skew as a result of running for a longer period.
v0.4.2
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.4.2/manifests/install.yaml
Changes since v0.4.1
Bug Fixes
v0.4.1
Quick Start
kubectl create namespace argo-rollouts
kubectl apply -n argo-rollouts -f https://raw.githubusercontent.com/argoproj/argo-rollouts/v0.4.1/manifests/install.yaml
Changes since v0.4.0
Bug Fixes
- Workaround K8s inability to properly validate 'items' subfields #114