Replies: 3 comments
-
Bonjour @MBA78 ,
C'est également ma configuration.
Alors, pour faire simple (du moins je vais essayer). L'intégration créé donc une seule entité de type climate, pour le poêle lui même.
Les 2 MultiAir auront uniquement des entités :
On utilise l'un ou l'autre de ces number soit le 1er en mettant le second sut auto via le site firenet, soit le second. Voilà donc le fonctionnement "normal" de l'intégration. Pour moi, il y a plusieurs défauts à ça :
Ces défauts m'ont donc poussés à créer 3 nouveaux thermostats virtuels sur Home Assistant:
J'ai d'abord utilisé des thermostats génériques coté HA pour tout ça, et des templates pour calculer la puissance a envoyer au poêle et aux multiairs en fonction de la température cible, température réelle, température extérieure, mais finalement j'ai tout repris pour passer sur des thermostats PID. Pas évident de trouver des bons coefficients, mais une fois fait, la puissance s'adapte automatiquement.
Essaie de comprendre ce que j'ai fait avant de simplement dupliquer. Mais oui, si tu veux un fonctionnement basé sur des sondes de températures, il fe faut dupliquer ça.
Effectivement, GSG utilise un serveur web/php/mysql. Il peut sans doute être hébergé localement, sur un Pi.
Il me sert pour stopper les multiairs et mettre le poele en puissance mini (30%) si une porte/fenêtre est ouverte plus de X minutes, et de reprendre en fonctionnement normal ensuite.
Si la température extérieure est vraiment froide, je modifie les hystérésis pour que le poêle dépasse la consigne et limiter le nombre d'allumage dans la journée.
Mon thermostat virtuel du poêle (climate.rika) commande cet input boolean, et via une automatisation, et certains contrôles, si le boolean passe à vrai, climate.rika_domo s'allume, etc.
Par défaut la consigne présence/absence se fait par device tracker.
Même principe que le retour_domicile. Par défaut le thermostat baisse à une heure définie via l'integration scheduler. Mais si je vais me coucher plus tôt, une routine google home : bonne nuit active ce boolean, qui force la baisse de consigne de température, me donne ola météo du lendemain, etc etc.
Me permet de désactiver la planification. Je ne l'utilise pas, mais il est là au cas où...
L'inverse du mode nuit. Si la télé est encore allumée, je désactive la baisse de température la nuit. Je la réactive automatiquement également.
Par exemple si il fait froid et que je dois faire l'entretiens du poêle, pour éviter qu'il ne démarre inutilement. Ou en cas d'absence prolongée, etc.
Non, j'ai bien 2 multiairs, j'ai juste simplifié les exemples, la config est la même pour les 2.
Pas de soucis. Tu n'es pas obligé de tout reprendre, si le thermostat d'origine te convient, et si tu ne veux pas de sondes pour les chambres, l'intégration de base suffira. A toi de voir en fonction de tes besoins. Tu peux aussi gérer ça en plusieurs fois. Avec du recul, le fonctionnement actuel est parfait, sauf si le serveur FIRENET est hs, ou que mon wifi / connexion internet tombe. Il faut donc prévoir ça (connexion 4G de secour, alerte SMS , etc). Il y a risque que le poêle ne démarre pas, ou pire ne s'éteigne pas. J'espère avoir répondu à toutes tes questions. |
Beta Was this translation helpful? Give feedback.
-
Merci beaucoup pour la réponse rapide et toutes ces explications. Merci. |
Beta Was this translation helpful? Give feedback.
-
Merci, ça fait plaisir.
Tu peux sans soucis, commence par installer cette intégration, créé tes 2 thermostats pour les multiairs, mais garde dans un premier temps la sonde rika pour la zone principale.
Ma config ressemble beaucoup à celle présente ici. |
Beta Was this translation helpful? Give feedback.
-
Bonjour @antibill51,
nous allons faire installer un Rika Domo et je voudrais pouvoir tout contrôler à partir de Home Assistant.
Notre configuration sera la suivante:
J'essaye de comprendre ton intégration avancée:
group.ouverture_exterieur
input_boolean.mode_grand_froid
input_boolean.poele_rika
input_boolean.retour_domicile
input_boolean.mode_nuit
input_boolean.programmation_poele
input_boolean.mode_confort_prolonge
input_boolean.arret_force_rika
Comme tu peux le voir je me pose pas mal de questions...
Merci d'avance pour ton aide.
Cdt.
Beta Was this translation helpful? Give feedback.
All reactions