Support for Sunrise Point-H - 0xa123

[SekaiYakyu]

It's possible to implement:

00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family SMBus [8086:a123] (rev 31) (subsys 103c:836b)

The touchpad is a ELAN and on linux and windows it says connected via SMBus.

The laptop is an HP Power 15 KabyLake.

[SekaiYakyu]

More information about it.

[leo-labs]

It might be possible, please add your PCI id (0xa1238086) here https://github.com/leo-labs/VoodooSMBus/blob/master/VoodooSMBus/Info.plist#L30 and test if the kext loads...

[SekaiYakyu]

Thank you so much. It's working.

The only thing is it thinks that there's another connected mouse so if this is enable it stops working. But It's not a problem at all, just don't use this.

[SekaiYakyu]

I need to fix the brightness because I changed from VoodooPs2Controller (Rehab) to VoodooPs2 (Acidanthera), but it's a no brainer.
Finally my hackintosh is completed.

[leo-labs]

@SekaiYakyu I am going to add the PCI to the supported devices. Can you give me the exact model of your laptop or a link to it?

[leo-labs]

Also, does it have a trackpoint?

[SekaiYakyu]

HP Pavilion Power 15 cb00xx.
No trackpoint.

[SekaiYakyu]

After testing I find out that there's a deadzone on the right of the touchpad.
Looks like it thinks vertical scrolling by using that zone is enabled.