qt_zh_tw.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_TW">
<context>
    <name>QPlatformTheme</name>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation>確定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>儲存</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>儲存(&amp;S)</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>中止</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>套用</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重設</translation>
    </message>
    <message>
        <source>Retry</source>
        <translation>重試</translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation>還原預設值</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>關閉(&amp;C)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Close without Saving</source>
        <translation>關閉而不儲存</translation>
    </message>
    <message>
        <source>N&amp;o to All</source>
        <translation>全部回答否(&amp;O)</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>全部儲存</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>捨棄</translation>
    </message>
    <message>
        <source>Yes to &amp;All</source>
        <translation>全部回答是(&amp;A)</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不要儲存</translation>
    </message>
</context>
<context>
    <name>QKeySequenceEdit</name>
    <message>
        <source>Press shortcut</source>
        <translation>按下快速鍵</translation>
    </message>
</context>
<context>
    <name>QShortcut</name>
    <message>
        <source>+</source>
        <translation>+</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Up</source>
        <translation>上鍵</translation>
    </message>
    <message>
        <source>Alt</source>
        <translation>Alt</translation>
    </message>
    <message>
        <source>F%1</source>
        <translation>F%1</translation>
    </message>
    <message>
        <source>Del</source>
        <translation>Del</translation>
    </message>
    <message>
        <source>End</source>
        <translation>End</translation>
    </message>
    <message>
        <source>Esc</source>
        <translation>Esc</translation>
    </message>
    <message>
        <source>Ins</source>
        <translation>Ins</translation>
    </message>
    <message>
        <source>Tab</source>
        <translation>Tab</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>Call</source>
        <translation>呼叫</translation>
    </message>
    <message>
        <source>Ctrl</source>
        <translation>Ctrl</translation>
    </message>
    <message>
        <source>Down</source>
        <translation>下鍵</translation>
    </message>
    <message>
        <source>Flip</source>
        <translation>反轉</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Home</source>
        <translation>Home</translation>
    </message>
    <message>
        <source>Left</source>
        <translation>左鍵</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>選單</translation>
    </message>
    <message>
        <source>Meta</source>
        <translation>Meta</translation>
    </message>
    <message>
        <source>PgUp</source>
        <translation>PgUp</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Enter</source>
        <translation>Enter</translation>
    </message>
    <message>
        <source>Pause</source>
        <translation>Pause</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>Print</translation>
    </message>
    <message>
        <source>Right</source>
        <translation>右鍵</translation>
    </message>
    <message>
        <source>Shift</source>
        <translation>Shift</translation>
    </message>
    <message>
        <source>Space</source>
        <translation>空白鍵</translation>
    </message>
    <message>
        <source>Media Record</source>
        <translation>媒體錄音</translation>
    </message>
    <message>
        <source>Print Screen</source>
        <translation>列印螢幕</translation>
    </message>
    <message>
        <source>Treble Down</source>
        <translation>降低高音</translation>
    </message>
    <message>
        <source>Scroll Lock</source>
        <translation>捲軸鎖定</translation>
    </message>
    <message>
        <source>Volume Down</source>
        <translation>音量降低</translation>
    </message>
    <message>
        <source>Volume Mute</source>
        <translation>靜音</translation>
    </message>
    <message>
        <source>Media Previous</source>
        <translation>媒體前一首</translation>
    </message>
    <message>
        <source>Home Page</source>
        <translation>首頁</translation>
    </message>
    <message>
        <source>Volume Up</source>
        <translation>音量提高</translation>
    </message>
    <message>
        <source>Launch (6)</source>
        <translation>啟動（6）</translation>
    </message>
    <message>
        <source>Launch (7)</source>
        <translation>啟動（7）</translation>
    </message>
    <message>
        <source>Launch (8)</source>
        <translation>啟動（8）</translation>
    </message>
    <message>
        <source>Launch (9)</source>
        <translation>啟動（9）</translation>
    </message>
    <message>
        <source>Launch (2)</source>
        <translation>啟動（2）</translation>
    </message>
    <message>
        <source>Launch (3)</source>
        <translation>啟動（3）</translation>
    </message>
    <message>
        <source>Launch (4)</source>
        <translation>啟動（4）</translation>
    </message>
    <message>
        <source>Launch (5)</source>
        <translation>啟動（5）</translation>
    </message>
    <message>
        <source>Launch (0)</source>
        <translation>啟動（0）</translation>
    </message>
    <message>
        <source>Launch (1)</source>
        <translation>啟動（1）</translation>
    </message>
    <message>
        <source>Launch (F)</source>
        <translation>啟動（F）</translation>
    </message>
    <message>
        <source>Launch (B)</source>
        <translation>啟動（B）</translation>
    </message>
    <message>
        <source>Launch (C)</source>
        <translation>啟動（C）</translation>
    </message>
    <message>
        <source>Launch (D)</source>
        <translation>啟動（D）</translation>
    </message>
    <message>
        <source>Launch (E)</source>
        <translation>啟動（E）</translation>
    </message>
    <message>
        <source>Launch (A)</source>
        <translation>啟動（A）</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>刪除</translation>
    </message>
    <message>
        <source>Escape</source>
        <translation>Escape</translation>
    </message>
    <message>
        <source>Hangup</source>
        <translation>掛斷</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Bass Boost</source>
        <translation>重低音</translation>
    </message>
    <message>
        <source>PgDown</source>
        <translation>PgDown</translation>
    </message>
    <message>
        <source>Return</source>
        <translation>Return</translation>
    </message>
    <message>
        <source>Search</source>
        <translation>搜尋</translation>
    </message>
    <message>
        <source>Select</source>
        <translation>選擇</translation>
    </message>
    <message>
        <source>SysReq</source>
        <translation>SysReq</translation>
    </message>
    <message>
        <source>NumLock</source>
        <translation>數字鎖定</translation>
    </message>
    <message>
        <source>ScrollLock</source>
        <translation>捲軸鎖定</translation>
    </message>
    <message>
        <source>Context1</source>
        <translation>內文1</translation>
    </message>
    <message>
        <source>Context2</source>
        <translation>內文2</translation>
    </message>
    <message>
        <source>Context3</source>
        <translation>內文3</translation>
    </message>
    <message>
        <source>Context4</source>
        <translation>內文4</translation>
    </message>
    <message>
        <source>Page Up</source>
        <translation>往上一頁</translation>
    </message>
    <message>
        <source>Open URL</source>
        <translation>開啟網址</translation>
    </message>
    <message>
        <source>Caps Lock</source>
        <translation>大寫鎖定</translation>
    </message>
    <message>
        <source>System Request</source>
        <translation>系統要求 SysRq</translation>
    </message>
    <message>
        <source>CapsLock</source>
        <translation>大寫鎖定</translation>
    </message>
    <message>
        <source>Backtab</source>
        <translation>Backtab</translation>
    </message>
    <message>
        <source>Bass Up</source>
        <translation>提升低音</translation>
    </message>
    <message>
        <source>Refresh</source>
        <translation>刷新</translation>
    </message>
    <message>
        <source>Launch Mail</source>
        <translation>啟動郵件程式</translation>
    </message>
    <message>
        <source>Backspace</source>
        <translation>Backspace</translation>
    </message>
    <message>
        <source>Bass Down</source>
        <translation>降低低音</translation>
    </message>
    <message>
        <source>Standby</source>
        <translation>待命</translation>
    </message>
    <message>
        <source>Treble Up</source>
        <translation>提升高音</translation>
    </message>
    <message>
        <source>Num Lock</source>
        <translation>數字鎖定</translation>
    </message>
    <message>
        <source>Number Lock</source>
        <translation>數字鎖定</translation>
    </message>
    <message>
        <source>Favorites</source>
        <translation>我的最愛</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Page Down</source>
        <translation>往下一頁</translation>
    </message>
    <message>
        <source>Media Play</source>
        <translation>媒體播放</translation>
    </message>
    <message>
        <source>Media Stop</source>
        <translation>媒體停止</translation>
    </message>
    <message>
        <source>Media Next</source>
        <translation>媒體下一首</translation>
    </message>
    <message>
        <source>Launch Media</source>
        <translation>啟動媒體程式</translation>
    </message>
</context>
<context>
    <name>QPrintDialog</name>
    <message>
        <source>A0</source>
        <translation>A0</translation>
    </message>
    <message>
        <source>A1</source>
        <translation>A1</translation>
    </message>
    <message>
        <source>A2</source>
        <translation>A2</translation>
    </message>
    <message>
        <source>A3</source>
        <translation>A3</translation>
    </message>
    <message>
        <source>A4</source>
        <translation>A4</translation>
    </message>
    <message>
        <source>A5</source>
        <translation>A5</translation>
    </message>
    <message>
        <source>A6</source>
        <translation>A6</translation>
    </message>
    <message>
        <source>A7</source>
        <translation>A7</translation>
    </message>
    <message>
        <source>A8</source>
        <translation>A8</translation>
    </message>
    <message>
        <source>A9</source>
        <translation>A9</translation>
    </message>
    <message>
        <source>B0</source>
        <translation>B0</translation>
    </message>
    <message>
        <source>B1</source>
        <translation>B1</translation>
    </message>
    <message>
        <source>B2</source>
        <translation>B2</translation>
    </message>
    <message>
        <source>B3</source>
        <translation>B3</translation>
    </message>
    <message>
        <source>B4</source>
        <translation>B4</translation>
    </message>
    <message>
        <source>B5</source>
        <translation>B5</translation>
    </message>
    <message>
        <source>B6</source>
        <translation>B6</translation>
    </message>
    <message>
        <source>B7</source>
        <translation>B7</translation>
    </message>
    <message>
        <source>B8</source>
        <translation>B8</translation>
    </message>
    <message>
        <source>B9</source>
        <translation>B9</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>B10</source>
        <translation>B10</translation>
    </message>
    <message>
        <source>C5E</source>
        <translation>C5E</translation>
    </message>
    <message>
        <source>DLE</source>
        <translation>DLE</translation>
    </message>
    <message>
        <source>A6 (105 x 148 mm)</source>
        <translation>A6 (105 x 148 mm)</translation>
    </message>
    <message>
        <source>Legal (8.5 x 14 inches, 216 x 356 mm)</source>
        <translation>Legal (8.5 x 14 英吋, 216 x 356 mm)</translation>
    </message>
    <message>
        <source>Folio</source>
        <translation>對摺的紙</translation>
    </message>
    <message>
        <source>Legal</source>
        <translation>Legal</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>全部列印</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>列印</translation>
    </message>
    <message>
        <source>&amp;Options &lt;&lt;</source>
        <translation>操作 (&amp;O) &lt;&lt;</translation>
    </message>
    <message>
        <source>&amp;Options &gt;&gt;</source>
        <translation>操作 (&amp;O) &gt;&gt;</translation>
    </message>
    <message>
        <source>B6 (125 x 176 mm)</source>
        <translation>B6 (125 x 176 mm)</translation>
    </message>
    <message>
        <source>B8 (62 x 88 mm)</source>
        <translation>B8 (62 x 88 mm)</translation>
    </message>
    <message>
        <source>A8 (52 x 74 mm)</source>
        <translation>A8 (52 x 74 mm)</translation>
    </message>
    <message>
        <source>B9 (44 x 62 mm)</source>
        <translation>B9 (44 x 62 mm)</translation>
    </message>
    <message>
        <source>A9 (37 x 52 mm)</source>
        <translation>A9 (37 x 52 mm)</translation>
    </message>
    <message>
        <source>B0 (1000 x 1414 mm)</source>
        <translation>B0 (1000 x 1414 mm)</translation>
    </message>
    <message>
        <source>A5 (148 x 210 mm)</source>
        <translation>A5 (148 x 210 mm)</translation>
    </message>
    <message>
        <source>Tabloid (279 x 432 mm)</source>
        <translation>小型報紙（279 x 432 mm）</translation>
    </message>
    <message>
        <source>B10 (31 x 44 mm)</source>
        <translation>B10 (31 x 44 mm)</translation>
    </message>
    <message>
        <source>B2 (500 x 707 mm)</source>
        <translation>B2 (500 x 707 mm)</translation>
    </message>
    <message>
        <source>&amp;Print</source>
        <translation>列印(&amp;P)</translation>
    </message>
    <message>
        <source>A3 (297 x 420 mm)</source>
        <translation>A3 (297 x 420 mm)</translation>
    </message>
    <message>
        <source>Print selection</source>
        <translation>列印選擇區</translation>
    </message>
    <message>
        <source>Print to File (Postscript)</source>
        <translation>列印到檔案（Postscript）</translation>
    </message>
    <message>
        <source>B4 (250 x 353 mm)</source>
        <translation>B4 (250 x 353 mm)</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to overwrite it?</source>
        <translation>%1 已存在。
您要覆寫它嗎？</translation>
    </message>
    <message>
        <source>A1 (594 x 841 mm)</source>
        <translation>A1 (594 x 841 mm)</translation>
    </message>
    <message>
        <source>Custom</source>
        <translation>自訂</translation>
    </message>
    <message>
        <source>B1 (707 x 1000 mm)</source>
        <translation>B1 (707 x 1000 mm)</translation>
    </message>
    <message>
        <source>Folio (210 x 330 mm)</source>
        <translation>對開 (210 x 330 mm)</translation>
    </message>
    <message>
        <source>Ledger</source>
        <translation>帳本頁</translation>
    </message>
    <message>
        <source>Letter</source>
        <translation>信紙</translation>
    </message>
    <message>
        <source>DLE (110 x 220 mm)</source>
        <translation>DL 信封（110 x 220 mm）</translation>
    </message>
    <message>
        <source>C5E (163 x 229 mm)</source>
        <translation>C5E (163 x 229 mm)</translation>
    </message>
    <message>
        <source>B5 (176 x 250 mm, 6.93 x 9.84 inches)</source>
        <translation>B5 (176 x 250 mm, 6.93 x 9.84 英吋)</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>列印範圍</translation>
    </message>
    <message>
        <source>File exists</source>
        <translation>檔案已存在</translation>
    </message>
    <message>
        <source>Write %1 file</source>
        <translation>寫入 %1 檔案</translation>
    </message>
    <message>
        <source>A0 (841 x 1189 mm)</source>
        <translation>A0 (841 x 1189 mm)</translation>
    </message>
    <message>
        <source>Local file</source>
        <translation>本地端檔案</translation>
    </message>
    <message>
        <source>locally connected</source>
        <translation>本地連接</translation>
    </message>
    <message>
        <source>Ledger (432 x 279 mm)</source>
        <translation>帳本頁（432 x 279 mm）</translation>
    </message>
    <message>
        <source>Aliases: %1</source>
        <translation>別名：%1</translation>
    </message>
    <message>
        <source>Print to File (PDF)</source>
        <translation>列印到檔案（PDF）</translation>
    </message>
    <message>
        <source>Print To File ...</source>
        <translation>列印到檔案...</translation>
    </message>
    <message>
        <source>US Common #10 Envelope (105 x 241 mm)</source>
        <translation>US 常用 10 號信封 (105x241 mm)</translation>
    </message>
    <message>
        <source>Tabloid</source>
        <translation>小型報紙</translation>
    </message>
    <message>
        <source>A4 (210 x 297 mm, 8.26 x 11.7 inches)</source>
        <translation>A4 (210 x 297 mm, 8.26 x 11.7 英吋)</translation>
    </message>
    <message>
        <source>Executive</source>
        <translation>行政文件</translation>
    </message>
    <message>
        <source>unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Do you want to overwrite it?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;您要覆寫它嗎？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Executive (7.5 x 10 inches, 191 x 254 mm)</source>
        <translation>Executive (7.5 x 10 英吋, 191 x 254 mm)</translation>
    </message>
    <message>
        <source>Letter (8.5 x 11 inches, 216 x 279 mm)</source>
        <translation>Letter (8.5 x 11 英吋, 216 x 279 mm)</translation>
    </message>
    <message>
        <source>The &apos;From&apos; value cannot be greater than the &apos;To&apos; value.</source>
        <translation>起始數值不能大於結束數值。</translation>
    </message>
    <message>
        <source>US Common #10 Envelope</source>
        <translation>美國通用信封 #10</translation>
    </message>
    <message>
        <source>%1 is a directory.
Please choose a different file name.</source>
        <translation>%1 是一個目錄。
請選擇其他檔名。</translation>
    </message>
    <message>
        <source>File %1 is not writable.
Please choose a different file name.</source>
        <translation>檔案 %1 無法寫入。
請選擇其它檔名。</translation>
    </message>
    <message>
        <source>B3 (353 x 500 mm)</source>
        <translation>B3 (353 x 500 mm)</translation>
    </message>
    <message>
        <source>A7 (74 x 105 mm)</source>
        <translation>A7 (74 x 105 mm)</translation>
    </message>
    <message>
        <source>A2 (420 x 594 mm)</source>
        <translation>A2 (420 x 594 mm)</translation>
    </message>
    <message>
        <source>B7 (88 x 125 mm)</source>
        <translation>B7 (88 x 125 mm)</translation>
    </message>
</context>
<context>
    <name>QDateTimeEdit</name>
    <message>
        <source>AM</source>
        <translation>AM</translation>
    </message>
    <message>
        <source>PM</source>
        <translation>PM</translation>
    </message>
    <message>
        <source>am</source>
        <translation>am</translation>
    </message>
    <message>
        <source>pm</source>
        <translation>pm</translation>
    </message>
</context>
<context>
    <name>Q3TabDialog</name>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>套用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Defaults</source>
        <translation>預設</translation>
    </message>
</context>
<context>
    <name>QAxSelect</name>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>COM &amp;Object:</source>
        <translation>COM 物件 (&amp;O)：</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Select ActiveX Control</source>
        <translation>選擇 ActiveX 控制</translation>
    </message>
</context>
<context>
    <name>QDialogButtonBox</name>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation>確定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Save</source>
        <translation>儲存</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>儲存(&amp;S)</translation>
    </message>
    <message>
        <source>Abort</source>
        <translation>中止</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation>套用</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Retry</source>
        <translation>重試</translation>
    </message>
    <message>
        <source>Restore Defaults</source>
        <translation>回復預設值</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>關閉(&amp;C)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Close without Saving</source>
        <translation>關閉而不儲存</translation>
    </message>
    <message>
        <source>N&amp;o to All</source>
        <translation>全部回答否(&amp;O)</translation>
    </message>
    <message>
        <source>Save All</source>
        <translation>全部儲存</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>Discard</source>
        <translation>丟棄</translation>
    </message>
    <message>
        <source>Yes to &amp;All</source>
        <translation>全部回答是(&amp;A)</translation>
    </message>
    <message>
        <source>Don&apos;t Save</source>
        <translation>不要儲存</translation>
    </message>
</context>
<context>
    <name>QMessageBox</name>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Show Details...</source>
        <translation>顯示詳情...</translation>
    </message>
    <message>
        <source>About Qt</source>
        <translation>關於 Qt</translation>
    </message>
    <message>
        <source>Hide Details...</source>
        <translation>隱藏詳情...</translation>
    </message>
</context>
<context>
    <name>QSql</name>
    <message>
        <source>No</source>
        <translation>否</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation>是</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>刪除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
    <message>
        <source>Delete this record?</source>
        <translation>要刪除這筆紀錄嗎？</translation>
    </message>
    <message>
        <source>Save edits?</source>
        <translation>要儲存編輯過的內容嗎？</translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation>確認</translation>
    </message>
    <message>
        <source>Cancel your edits?</source>
        <translation>要取消編輯嗎？</translation>
    </message>
</context>
<context>
    <name>QPrintSettingsOutput</name>
    <message>
        <source>to</source>
        <translation>到</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>表單</translation>
    </message>
    <message>
        <source>None</source>
        <translation>無</translation>
    </message>
    <message>
        <source>Color</source>
        <translation>顏色</translation>
    </message>
    <message>
        <source>Print all</source>
        <translation>全部列印</translation>
    </message>
    <message>
        <source>Selection</source>
        <translation>選擇區</translation>
    </message>
    <message>
        <source>Long side</source>
        <translation>長邊</translation>
    </message>
    <message>
        <source>Copies</source>
        <translation>份數</translation>
    </message>
    <message>
        <source>Print range</source>
        <translation>列印範圍</translation>
    </message>
    <message>
        <source>Color Mode</source>
        <translation>顏色模式</translation>
    </message>
    <message>
        <source>Options</source>
        <translation>選項</translation>
    </message>
    <message>
        <source>Output Settings</source>
        <translation>輸出設定</translation>
    </message>
    <message>
        <source>Reverse</source>
        <translation>反向</translation>
    </message>
    <message>
        <source>Grayscale</source>
        <translation>灰階</translation>
    </message>
    <message>
        <source>Short side</source>
        <translation>短邊</translation>
    </message>
    <message>
        <source>Collate</source>
        <translation>校對</translation>
    </message>
    <message>
        <source>Copies:</source>
        <translation>份數：</translation>
    </message>
    <message>
        <source>Pages from</source>
        <translation>指定頁面：從</translation>
    </message>
    <message>
        <source>Duplex Printing</source>
        <translation>雙工列印</translation>
    </message>
</context>
<context>
    <name>QPrintPreviewDialog</name>
    <message>
        <source>%1%</source>
        <translation>%1%</translation>
    </message>
    <message>
        <source>Print Preview</source>
        <translation>列印預覽</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Print</source>
        <translation>列印</translation>
    </message>
    <message>
        <source>Fit page</source>
        <translation>符合頁面</translation>
    </message>
    <message>
        <source>Zoom in</source>
        <translation>放大</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>橫向</translation>
    </message>
    <message>
        <source>Zoom out</source>
        <translation>縮小</translation>
    </message>
    <message>
        <source>Fit width</source>
        <translation>符合寬度</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>縱向</translation>
    </message>
    <message>
        <source>Page Setup</source>
        <translation>頁面設定</translation>
    </message>
    <message>
        <source>Page setup</source>
        <translation>列印設定</translation>
    </message>
    <message>
        <source>Show overview of all pages</source>
        <translation>顯示所有頁面預覽</translation>
    </message>
    <message>
        <source>First page</source>
        <translation>第一頁</translation>
    </message>
    <message>
        <source>Last page</source>
        <translation>最後一頁</translation>
    </message>
    <message>
        <source>Show single page</source>
        <translation>顯示單一頁面</translation>
    </message>
    <message>
        <source>Export to PDF</source>
        <translation>匯出到 PDF 檔</translation>
    </message>
    <message>
        <source>Previous page</source>
        <translation>前一頁</translation>
    </message>
    <message>
        <source>Next page</source>
        <translation>下一頁</translation>
    </message>
    <message>
        <source>Show facing pages</source>
        <translation>顯示封面</translation>
    </message>
    <message>
        <source>Export to PostScript</source>
        <translation>匯出到 PostScript 檔</translation>
    </message>
</context>
<context>
    <name>Q3FileDialog</name>
    <message>
        <source>&amp;OK</source>
        <translation>確定(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation>否(&amp;N)</translation>
    </message>
    <message>
        <source>Dir</source>
        <translation>目錄</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation>是(&amp;Y)</translation>
    </message>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>Date</source>
        <translation>日期</translation>
    </message>
    <message>
        <source>File</source>
        <translation>檔案</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名稱</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Sort</source>
        <translation>排序</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型態</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>開啟(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>儲存(&amp;S)</translation>
    </message>
    <message>
        <source>Error</source>
        <translation>錯誤</translation>
    </message>
    <message>
        <source>Open </source>
        <translation>開啟 </translation>
    </message>
    <message>
        <source>Write: %1</source>
        <translation>寫入：%1</translation>
    </message>
    <message>
        <source>Sort by &amp;Size</source>
        <translation>依大小排序(&amp;S)</translation>
    </message>
    <message>
        <source>Sort by &amp;Date</source>
        <translation>依日期排序(&amp;D)</translation>
    </message>
    <message>
        <source>Sort by &amp;Name</source>
        <translation>依名稱排序(&amp;N)</translation>
    </message>
    <message>
        <source>New Folder 1</source>
        <translation>新資料夾 1</translation>
    </message>
    <message>
        <source>the directory</source>
        <translation>此目錄</translation>
    </message>
    <message>
        <source>File &amp;type:</source>
        <translation>檔案型態(&amp;T)：</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>檔名(&amp;N)：</translation>
    </message>
    <message>
        <source>Delete %1</source>
        <translation>刪除 %1</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>R&amp;eload</source>
        <translation>重新載入(&amp;E)</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新資料夾</translation>
    </message>
    <message>
        <source>&amp;Unsorted</source>
        <translation>未排序(&amp;U)</translation>
    </message>
    <message>
        <source>Look &amp;in:</source>
        <translation>尋找於(&amp;I)：</translation>
    </message>
    <message>
        <source>Preview File Contents</source>
        <translation>預覽檔案內容</translation>
    </message>
    <message>
        <source>New Folder %1</source>
        <translation>新資料夾 %1</translation>
    </message>
    <message>
        <source>Read-write</source>
        <translation>可讀寫</translation>
    </message>
    <message>
        <source>Read-only</source>
        <translation>唯讀</translation>
    </message>
    <message>
        <source>Copy or Move a File</source>
        <translation>複製或移動檔案</translation>
    </message>
    <message>
        <source>&lt;qt&gt;Are you sure you wish to delete %1 &quot;%2&quot;?&lt;/qt&gt;</source>
        <translation>&lt;qt&gt;您確定要刪除 %1 &quot;%2&quot; 嗎？&lt;/qt&gt;</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>尋找目錄</translation>
    </message>
    <message>
        <source>Attributes</source>
        <translation>屬性</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>顯示隱藏檔(&amp;H)</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存新檔</translation>
    </message>
    <message>
        <source>Inaccessible</source>
        <translation>無法存取</translation>
    </message>
    <message>
        <source>%1
File not found.
Check path and filename.</source>
        <translation>%1
找不到檔案。
請檢查路徑與檔名。</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表檢視</translation>
    </message>
    <message>
        <source>Special</source>
        <translation>特殊節點</translation>
    </message>
    <message>
        <source>Write-only</source>
        <translation>唯寫</translation>
    </message>
    <message>
        <source>the symlink</source>
        <translation>此符號連結</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>刪除(&amp;D)</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有檔案 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目錄</translation>
    </message>
    <message>
        <source>Symlink to Special</source>
        <translation>到特殊節點的符號連結</translation>
    </message>
    <message>
        <source>Select a Directory</source>
        <translation>請選擇一個目錄</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有檔案 (*.*)</translation>
    </message>
    <message>
        <source>Read: %1</source>
        <translation>讀取：%1</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>重新命名(&amp;R)</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目錄：</translation>
    </message>
    <message>
        <source>One directory up</source>
        <translation>往上一層目錄</translation>
    </message>
    <message>
        <source>Preview File Info</source>
        <translation>預覽檔案資訊</translation>
    </message>
    <message>
        <source>the file</source>
        <translation>此檔案</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>建立新資料夾</translation>
    </message>
    <message>
        <source>Symlink to File</source>
        <translation>到檔案的符號連結</translation>
    </message>
    <message>
        <source>Symlink to Directory</source>
        <translation>到目錄的符號連結</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>詳細檢視</translation>
    </message>
</context>
<context>
    <name>QErrorMessage</name>
    <message>
        <source>&amp;OK</source>
        <translation>確定(&amp;O)</translation>
    </message>
    <message>
        <source>Fatal Error:</source>
        <translation>嚴重錯誤：</translation>
    </message>
    <message>
        <source>&amp;Show this message again</source>
        <translation>再度顯示此訊息(&amp;S)</translation>
    </message>
    <message>
        <source>Debug Message:</source>
        <translation>除錯訊息：</translation>
    </message>
    <message>
        <source>Warning:</source>
        <translation>警告：</translation>
    </message>
</context>
<context>
    <name>QPrintWidget</name>
    <message>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <source>Form</source>
        <translation>表單</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation>型態：</translation>
    </message>
    <message>
        <source>&amp;Name:</source>
        <translation>名稱(&amp;N)：</translation>
    </message>
    <message>
        <source>Output &amp;file:</source>
        <translation>輸出檔案(&amp;F)：</translation>
    </message>
    <message>
        <source>P&amp;roperties</source>
        <translation>屬性(&amp;R)</translation>
    </message>
    <message>
        <source>Preview</source>
        <translation>預覽</translation>
    </message>
    <message>
        <source>Printer</source>
        <translation>印表機</translation>
    </message>
    <message>
        <source>Location:</source>
        <translation>位置：</translation>
    </message>
</context>
<context>
    <name>QFontDatabase</name>
    <message>
        <source>Any</source>
        <translation>任何</translation>
    </message>
    <message>
        <source>Lao</source>
        <translation>寮國</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗體</translation>
    </message>
    <message>
        <source>Demi</source>
        <translation>半體</translation>
    </message>
    <message>
        <source>Thai</source>
        <translation>泰語</translation>
    </message>
    <message>
        <source>Black</source>
        <translation>黑體</translation>
    </message>
    <message>
        <source>Greek</source>
        <translation>希臘</translation>
    </message>
    <message>
        <source>Khmer</source>
        <translation>高棉</translation>
    </message>
    <message>
        <source>Latin</source>
        <translation>拉丁</translation>
    </message>
    <message>
        <source>Light</source>
        <translation>輕體</translation>
    </message>
    <message>
        <source>Ogham</source>
        <translation>歐甘</translation>
    </message>
    <message>
        <source>Oriya</source>
        <translation>Oriya</translation>
    </message>
    <message>
        <source>Runic</source>
        <translation>盧恩</translation>
    </message>
    <message>
        <source>Tamil</source>
        <translation>坦米爾</translation>
    </message>
    <message>
        <source>Cyrillic</source>
        <translation>斯拉夫</translation>
    </message>
    <message>
        <source>Kannada</source>
        <translation>坎達那</translation>
    </message>
    <message>
        <source>Malayalam</source>
        <translation>馬來語</translation>
    </message>
    <message>
        <source>Simplified Chinese</source>
        <translation>簡體中文</translation>
    </message>
    <message>
        <source>Demi Bold</source>
        <translation>半粗體</translation>
    </message>
    <message>
        <source>Arabic</source>
        <translation>阿拉伯</translation>
    </message>
    <message>
        <source>Hebrew</source>
        <translation>希伯來</translation>
    </message>
    <message>
        <source>Myanmar</source>
        <translation>緬甸</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜體</translation>
    </message>
    <message>
        <source>Korean</source>
        <translation>韓語</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation>正常</translation>
    </message>
    <message>
        <source>Oblique</source>
        <translation>傾斜體</translation>
    </message>
    <message>
        <source>Telugu</source>
        <translation>Telugu</translation>
    </message>
    <message>
        <source>Thaana</source>
        <translation>Thaana</translation>
    </message>
    <message>
        <source>Symbol</source>
        <translation>符號</translation>
    </message>
    <message>
        <source>Syriac</source>
        <translation>敘利亞</translation>
    </message>
    <message>
        <source>Devanagari</source>
        <translation>Devanagari</translation>
    </message>
    <message>
        <source>Japanese</source>
        <translation>日語</translation>
    </message>
    <message>
        <source>Bengali</source>
        <translation>孟加拉</translation>
    </message>
    <message>
        <source>Armenian</source>
        <translation>亞美尼亞</translation>
    </message>
    <message>
        <source>Sinhala</source>
        <translation>錫蘭</translation>
    </message>
    <message>
        <source>Tibetan</source>
        <translation>西藏</translation>
    </message>
    <message>
        <source>Vietnamese</source>
        <translation>越南</translation>
    </message>
    <message>
        <source>Gujarati</source>
        <translation>Gujarati</translation>
    </message>
    <message>
        <source>Traditional Chinese</source>
        <translation>繁體中文</translation>
    </message>
    <message>
        <source>Georgian</source>
        <translation>喬治亞</translation>
    </message>
    <message>
        <source>Gurmukhi</source>
        <translation>Gurmukhi</translation>
    </message>
</context>
<context>
    <name>QWebPage</name>
    <message>
        <source>Cut</source>
        <translation>剪下</translation>
    </message>
    <message>
        <source>LTR</source>
        <translation>左到右</translation>
    </message>
    <message>
        <source>RTL</source>
        <translation>右到左</translation>
    </message>
    <message>
        <source>Top</source>
        <translation>頂端</translation>
    </message>
    <message>
        <source>Bold</source>
        <translation>粗體</translation>
    </message>
    <message>
        <source>Copy</source>
        <translation>複製</translation>
    </message>
    <message>
        <source>Stop</source>
        <translation>停止</translation>
    </message>
    <message>
        <source>Open Frame</source>
        <translation>開啟框架</translation>
    </message>
    <message>
        <source>Open Image</source>
        <translation>開啟影像</translation>
    </message>
    <message>
        <source>Fonts</source>
        <translation>字型</translation>
    </message>
    <message>
        <source>Paste</source>
        <translation>貼上</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重置</translation>
    </message>
    <message>
        <source>Inspect</source>
        <translation>查驗</translation>
    </message>
    <message>
        <source>Select to the start of the block</source>
        <translation>選擇到這一個區塊的起頭</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the block</source>
        <translation>移動游標到這一個區塊的結尾</translation>
    </message>
    <message>
        <source>Select to the start of the line</source>
        <translation>選擇到這一行的起頭</translation>
    </message>
    <message>
        <source>Look Up In Dictionary</source>
        <translation>在字典裡搜尋</translation>
    </message>
    <message>
        <source>Search The Web</source>
        <translation>搜尋站台</translation>
    </message>
    <message>
        <source>Check Spelling While Typing</source>
        <translation>打字時立即檢查拼字</translation>
    </message>
    <message>
        <source>Add To Dictionary</source>
        <translation>新增到字典</translation>
    </message>
    <message>
        <source>Delete to the start of the word</source>
        <translation>刪除到此單字的起頭</translation>
    </message>
    <message>
        <source>Recent searches</source>
        <translation>最近的搜尋</translation>
    </message>
    <message>
        <source>Move the cursor to the next word</source>
        <translation>移動游標到下一個單字</translation>
    </message>
    <message>
        <source>Move the cursor to the next line</source>
        <translation>移動游標到下一行</translation>
    </message>
    <message>
        <source>JavaScript Alert - %1</source>
        <translation>JavaScript 警告 ─ %1</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>往下捲軸</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>在此捲軸</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>往左捲軸</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the block</source>
        <translation>移動游標到這一個區塊的起頭</translation>
    </message>
    <message>
        <source>Text Direction</source>
        <translation>文字方向</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底端</translation>
    </message>
    <message>
        <source>Ignore</source>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Italic</source>
        <translation>斜體</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the line</source>
        <translation>移動游標到這一行的結尾</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the line</source>
        <translation>移動游標到這一行的起頭</translation>
    </message>
    <message>
        <source>Reload</source>
        <translation>重新載入</translation>
    </message>
    <message>
        <source>JavaScript Confirm - %1</source>
        <translation>JavaScript 確認 ─ %1</translation>
    </message>
    <message>
        <source>Submit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Web Inspector - %2</source>
        <translation>網站查驗器─%2</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>頁面上方</translation>
    </message>
    <message>
        <source>Spelling</source>
        <translation>拼字</translation>
    </message>
    <message>
        <source>Outline</source>
        <translation>外框線</translation>
    </message>
    <message>
        <source>Check Grammar With Spelling</source>
        <translation>檢查拼字與文法</translation>
    </message>
    <message>
        <source>No file selected</source>
        <translation>未選取任何檔案</translation>
    </message>
    <message>
        <source>Ignore</source>
        <comment>Ignore Grammar context menu item</comment>
        <translation>忽略</translation>
    </message>
    <message>
        <source>Save Image</source>
        <translation>儲存影像</translation>
    </message>
    <message>
        <source>Save Link...</source>
        <translation>儲存連結...</translation>
    </message>
    <message>
        <source>No recent searches</source>
        <translation>沒有最近的搜尋</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>頁面右方</translation>
    </message>
    <message>
        <source>Move the cursor to the start of the document</source>
        <translation>移動游標到這一個文件的起頭</translation>
    </message>
    <message>
        <source>Move the cursor to the next character</source>
        <translation>移動游標到下一個字元</translation>
    </message>
    <message>
        <source>JavaScript Prompt - %1</source>
        <translation>JavaScript 提示 ─ %1</translation>
    </message>
    <message>
        <source>Copy Link</source>
        <translation>複製連結</translation>
    </message>
    <message>
        <source>Select to the previous line</source>
        <translation>選擇到前一行</translation>
    </message>
    <message>
        <source>Select to the previous word</source>
        <translation>選擇到前一個單字</translation>
    </message>
    <message>
        <source>Check Spelling</source>
        <translation>檢查拼字</translation>
    </message>
    <message>
        <source>Select to the next character</source>
        <translation>選擇到下一個字元</translation>
    </message>
    <message>
        <source>Show Spelling and Grammar</source>
        <translation>顯示拼字與文法</translation>
    </message>
    <message>
        <source>Delete to the end of the word</source>
        <translation>刪除到此單字的結尾</translation>
    </message>
    <message>
        <source>Direction</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Select to the end of the line</source>
        <translation>選擇到這一行的結尾</translation>
    </message>
    <message>
        <source>Submit</source>
        <comment>Submit (input element) alt text for &lt;input&gt; elements with no alt, title, or value</comment>
        <translation>提交</translation>
    </message>
    <message>
        <source>Choose File</source>
        <translation>選擇檔案</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>往上捲軸</translation>
    </message>
    <message>
        <source>Clear recent searches</source>
        <translation>清除最近的搜尋</translation>
    </message>
    <message>
        <source>Select to the start of the document</source>
        <translation>選擇到這一個文件的起頭</translation>
    </message>
    <message>
        <source>Default</source>
        <translation>預設</translation>
    </message>
    <message>
        <source>Underline</source>
        <translation>底線</translation>
    </message>
    <message>
        <source>Move the cursor to the previous character</source>
        <translation>移動游標到前一個字元</translation>
    </message>
    <message>
        <source>Copy Image</source>
        <translation>複製影像</translation>
    </message>
    <message>
        <source>Select to the end of the document</source>
        <translation>選擇到這一個文件的結尾</translation>
    </message>
    <message>
        <source>Select to the end of the block</source>
        <translation>選擇到這一個區塊的結尾</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>往右捲軸</translation>
    </message>
    <message>
        <source>No Guesses Found</source>
        <translation>找不到可能的內容</translation>
    </message>
    <message>
        <source>Open Link</source>
        <translation>開啟連結</translation>
    </message>
    <message>
        <source>Bad HTTP request</source>
        <translation>不良的 HTTP 請求</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>Move the cursor to the previous word</source>
        <translation>移動游標到前一個單字</translation>
    </message>
    <message>
        <source>Move the cursor to the previous line</source>
        <translation>移動游標到前一行</translation>
    </message>
    <message numerus="yes">
        <source>%n file(s)</source>
        <translation>
            <numerusform>%n 個檔案</numerusform>
        </translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左邊緣</translation>
    </message>
    <message>
        <source>Go Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>頁面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>頁面左方</translation>
    </message>
    <message>
        <source>This is a searchable index. Enter search keywords: </source>
        <translation>這是可搜尋的索引。請輸入關鍵字： </translation>
    </message>
    <message>
        <source>Select to the previous character</source>
        <translation>選擇到前一個字元</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>往回</translation>
    </message>
    <message>
        <source>Open in New Window</source>
        <translation>在新視窗開啟</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右邊緣</translation>
    </message>
    <message>
        <source>Move the cursor to the end of the document</source>
        <translation>移動游標到這一個文件的結尾</translation>
    </message>
    <message>
        <source>Hide Spelling and Grammar</source>
        <translation>隱藏拼字與文法</translation>
    </message>
    <message>
        <source>%1 (%2x%3 pixels)</source>
        <translation>%1（%2x%3 像素）</translation>
    </message>
    <message>
        <source>Select to the next word</source>
        <translation>選擇到下一個單字</translation>
    </message>
    <message>
        <source>Select to the next line</source>
        <translation>選擇到下一行</translation>
    </message>
</context>
<context>
    <name>QScrollBar</name>
    <message>
        <source>Top</source>
        <translation>頂端</translation>
    </message>
    <message>
        <source>Scroll down</source>
        <translation>往下捲軸</translation>
    </message>
    <message>
        <source>Scroll here</source>
        <translation>在此捲軸</translation>
    </message>
    <message>
        <source>Scroll left</source>
        <translation>往左捲軸</translation>
    </message>
    <message>
        <source>Line up</source>
        <translation>對上排列</translation>
    </message>
    <message>
        <source>Line down</source>
        <translation>對下排列</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation>底端</translation>
    </message>
    <message>
        <source>Page up</source>
        <translation>頁面上方</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>頁面右方</translation>
    </message>
    <message>
        <source>Scroll up</source>
        <translation>往上捲軸</translation>
    </message>
    <message>
        <source>Scroll right</source>
        <translation>往右捲軸</translation>
    </message>
    <message>
        <source>Left edge</source>
        <translation>左邊緣</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>頁面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>頁面左方</translation>
    </message>
    <message>
        <source>Right edge</source>
        <translation>右邊緣</translation>
    </message>
</context>
<context>
    <name>QInputContext</name>
    <message>
        <source>XIM</source>
        <translation>XIM</translation>
    </message>
    <message>
        <source>Windows input method</source>
        <translation>Windows 輸入法</translation>
    </message>
    <message>
        <source>XIM input method</source>
        <translation>XIM 輸入法</translation>
    </message>
    <message>
        <source>Mac OS X input method</source>
        <translation>Mac OS X 輸入法</translation>
    </message>
</context>
<context>
    <name>QFileDialog</name>
    <message>
        <source>Back</source>
        <translation>返回</translation>
    </message>
    <message>
        <source>File</source>
        <translation>檔案</translation>
    </message>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>&amp;Open</source>
        <translation>開啟(&amp;O)</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation>儲存(&amp;S)</translation>
    </message>
    <message>
        <source>Drive</source>
        <translation>磁碟</translation>
    </message>
    <message>
        <source>Show </source>
        <translation>顯示 </translation>
    </message>
    <message>
        <source>&apos;%1&apos; is write protected.
Do you want to delete it anyway?</source>
        <translation>%1 有寫入保護。
您確定要刪除它嗎？</translation>
    </message>
    <message>
        <source>File &amp;name:</source>
        <translation>檔名(&amp;N)：</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation>新資料夾</translation>
    </message>
    <message>
        <source>Parent Directory</source>
        <translation>父目錄</translation>
    </message>
    <message>
        <source>&amp;New Folder</source>
        <translation>新增資料夾(&amp;N)</translation>
    </message>
    <message>
        <source>Remove</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的電腦</translation>
    </message>
    <message>
        <source>Look in:</source>
        <translation>尋找於：</translation>
    </message>
    <message>
        <source>Files of type:</source>
        <translation>檔案型態：</translation>
    </message>
    <message>
        <source>Find Directory</source>
        <translation>尋找目錄</translation>
    </message>
    <message>
        <source>Show &amp;hidden files</source>
        <translation>顯示隱藏檔(&amp;H)</translation>
    </message>
    <message>
        <source>Are sure you want to delete &apos;%1&apos;?</source>
        <translation>您確定要刪除 %1 嗎？</translation>
    </message>
    <message>
        <source>Save As</source>
        <translation>另存新檔</translation>
    </message>
    <message>
        <source>%1
Directory not found.
Please verify the correct directory name was given.</source>
        <translation>%1
找不到目錄。
請檢查目錄名稱是否正確。</translation>
    </message>
    <message>
        <source>List View</source>
        <translation>列表檢視</translation>
    </message>
    <message>
        <source>&amp;Choose</source>
        <translation>選擇(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation>刪除(&amp;D)</translation>
    </message>
    <message>
        <source>All Files (*)</source>
        <translation>所有檔案 (*)</translation>
    </message>
    <message>
        <source>Directories</source>
        <translation>目錄</translation>
    </message>
    <message>
        <source>All Files (*.*)</source>
        <translation>所有檔案 (*.*)</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation>重新命名(&amp;R)</translation>
    </message>
    <message>
        <source>Could not delete directory.</source>
        <translation>無法刪除目錄。</translation>
    </message>
    <message>
        <source>Directory:</source>
        <translation>目錄：</translation>
    </message>
    <message>
        <source>Unknown</source>
        <translation>未知</translation>
    </message>
    <message>
        <source>%1 already exists.
Do you want to replace it?</source>
        <translation>%1 已存在
您要取代它嗎？</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation>往前</translation>
    </message>
    <message>
        <source>Recent Places</source>
        <translation>最近的地方</translation>
    </message>
    <message>
        <source>Create New Folder</source>
        <translation>建立新資料夾</translation>
    </message>
    <message>
        <source>Detail View</source>
        <translation>詳細檢視</translation>
    </message>
    <message>
        <source>%1
File not found.
Please verify the correct file name was given.</source>
        <translation>%1
找不到檔案。
請檢查檔名是否正確。</translation>
    </message>
</context>
<context>
    <name>Q3TextEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪下(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>複製(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>復原(&amp;U)</translation>
    </message>
    <message>
        <source>Clear</source>
        <translation>清除</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>貼上(&amp;P)</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部選擇</translation>
    </message>
</context>
<context>
    <name>QLineEdit</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪下(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>複製(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>復原(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>貼上(&amp;P)</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>刪除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部選擇</translation>
    </message>
</context>
<context>
    <name>QWidgetTextControl</name>
    <message>
        <source>Cu&amp;t</source>
        <translation>剪下(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation>複製(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation>重做(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation>復原(&amp;U)</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation>貼上(&amp;P)</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>刪除</translation>
    </message>
    <message>
        <source>Select All</source>
        <translation>全部選擇</translation>
    </message>
    <message>
        <source>Copy &amp;Link Location</source>
        <translation>複製連結位址(&amp;L)</translation>
    </message>
</context>
<context>
    <name>QDockWidget</name>
    <message>
        <source>Dock</source>
        <translation>嵌入</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Float</source>
        <translation>飄浮</translation>
    </message>
</context>
<context>
    <name>QDialog</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>What&apos;s This?</source>
        <translation>這是什麼？</translation>
    </message>
</context>
<context>
    <name>QWizard</name>
    <message>
        <source>Done</source>
        <translation>完成</translation>
    </message>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation>說明(&amp;H)</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation>下一個(&amp;N)</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Commit</source>
        <translation>提交</translation>
    </message>
    <message>
        <source>Continue</source>
        <translation>繼續</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>完成(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>下一個(&amp;N)＞</translation>
    </message>
    <message>
        <source>Go Back</source>
        <translation>往回</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>＜返回(&amp;B)</translation>
    </message>
</context>
<context>
    <name>QPageSetupWidget</name>
    <message>
        <source>Form</source>
        <translation>表單</translation>
    </message>
    <message>
        <source>bottom margin</source>
        <translation>下緣</translation>
    </message>
    <message>
        <source>Paper</source>
        <translation>紙張</translation>
    </message>
    <message>
        <source>Paper source:</source>
        <translation>紙張來源：</translation>
    </message>
    <message>
        <source>Centimeters (cm)</source>
        <translation>公分</translation>
    </message>
    <message>
        <source>right margin</source>
        <translation>右緣</translation>
    </message>
    <message>
        <source>Margins</source>
        <translation>邊緣</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation>橫向</translation>
    </message>
    <message>
        <source>Width:</source>
        <translation>寬度：</translation>
    </message>
    <message>
        <source>Orientation</source>
        <translation>方向</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation>縱向</translation>
    </message>
    <message>
        <source>top margin</source>
        <translation>上緣</translation>
    </message>
    <message>
        <source>left margin</source>
        <translation>左緣</translation>
    </message>
    <message>
        <source>Page size:</source>
        <translation>紙張大小：</translation>
    </message>
    <message>
        <source>Reverse portrait</source>
        <translation>反序縱向</translation>
    </message>
    <message>
        <source>Millimeters (mm)</source>
        <translation>公厘</translation>
    </message>
    <message>
        <source>Points (pt)</source>
        <translation>點</translation>
    </message>
    <message>
        <source>Inches (in)</source>
        <translation>英吋</translation>
    </message>
    <message>
        <source>Reverse landscape</source>
        <translation>反序橫向</translation>
    </message>
    <message>
        <source>Height:</source>
        <translation>高度：</translation>
    </message>
</context>
<context>
    <name>QPrintPropertiesWidget</name>
    <message>
        <source>Form</source>
        <translation>表單</translation>
    </message>
    <message>
        <source>Page</source>
        <translation>頁面</translation>
    </message>
    <message>
        <source>Advanced</source>
        <translation>進階</translation>
    </message>
</context>
<context>
    <name>QMdiSubWindow</name>
    <message>
        <source>Help</source>
        <translation>說明</translation>
    </message>
    <message>
        <source>Menu</source>
        <translation>選單</translation>
    </message>
    <message>
        <source>&amp;Move</source>
        <translation>移動(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Shade</source>
        <translation>遮蔽</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>留在頂端(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>關閉(&amp;C)</translation>
    </message>
    <message>
        <source>- [%1]</source>
        <translation>- [%1]</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>回復(&amp;R)</translation>
    </message>
    <message>
        <source>Restore</source>
        <translation>回復</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Unshade</source>
        <translation>取消遮蔽</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小化(&amp;N)</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大化(&amp;X)</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>向下恢復</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>Home</source>
        <translation>首頁</translation>
    </message>
    <message>
        <source>Protocol error: packet of size 0 received</source>
        <translation>協定錯誤：接收到大小為 0 的封包</translation>
    </message>
    <message>
        <source>Invalid URI: %1</source>
        <translation>不合法的網址：%1</translation>
    </message>
    <message>
        <source>Socket error on %1: %2</source>
        <translation>%1 上發生 socket 錯誤：%2</translation>
    </message>
    <message>
        <source>No host name given</source>
        <translation>未指定主機</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>從 %1 讀取錯誤：%2</translation>
    </message>
    <message>
        <source>Remote host closed the connection prematurely on %1</source>
        <translation>於 %1 上遠端主機關閉了不正常的連線</translation>
    </message>
    <message>
        <source>Operation not supported on %1</source>
        <translation>在 %1 上不支援此操作</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>寫入 %1 時發生錯誤：%2</translation>
    </message>
</context>
<context>
    <name>QDirModel</name>
    <message>
        <source>Kind</source>
        <translation>種類</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名稱</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型態</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>變更日期</translation>
    </message>
</context>
<context>
    <name>QFileSystemModel</name>
    <message>
        <source>Kind</source>
        <translation>種類</translation>
    </message>
    <message>
        <source>Name</source>
        <translation>名稱</translation>
    </message>
    <message>
        <source>Size</source>
        <translation>大小</translation>
    </message>
    <message>
        <source>Type</source>
        <translation>型態</translation>
    </message>
    <message>
        <source>%1 GB</source>
        <translation>%1 GB</translation>
    </message>
    <message>
        <source>%1 KB</source>
        <translation>%1 KB</translation>
    </message>
    <message>
        <source>%1 MB</source>
        <translation>%1 MB</translation>
    </message>
    <message>
        <source>%1 TB</source>
        <translation>%1 TB</translation>
    </message>
    <message>
        <source>&lt;b&gt;The name &quot;%1&quot; can not be used.&lt;/b&gt;&lt;p&gt;Try using another name, with fewer characters or no punctuations marks.</source>
        <translation>&lt;b&gt;無法使用名稱 &quot;%1&quot;。&lt;/b&gt;&lt;p&gt;請使用其它名稱，字元數少一點，或是不要有標點符號。</translation>
    </message>
    <message>
        <source>%1 bytes</source>
        <translation>%1 位元組</translation>
    </message>
    <message>
        <source>My Computer</source>
        <translation>我的電腦</translation>
    </message>
    <message>
        <source>Computer</source>
        <translation>電腦</translation>
    </message>
    <message>
        <source>Invalid filename</source>
        <translation>不合法的檔名</translation>
    </message>
    <message>
        <source>Date Modified</source>
        <translation>變更日期</translation>
    </message>
</context>
<context>
    <name>QDoubleSpinBox</name>
    <message>
        <source>Less</source>
        <translation>較少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QSpinBox</name>
    <message>
        <source>Less</source>
        <translation>較少</translation>
    </message>
    <message>
        <source>More</source>
        <translation>更多</translation>
    </message>
</context>
<context>
    <name>QPPDOptionsModel</name>
    <message>
        <source>Name</source>
        <translation>名稱</translation>
    </message>
    <message>
        <source>Value</source>
        <translation>值</translation>
    </message>
</context>
<context>
    <name>QComboBox</name>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
</context>
<context>
    <name>QMenu</name>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Execute</source>
        <translation>執行</translation>
    </message>
</context>
<context>
    <name>QPushButton</name>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
</context>
<context>
    <name>QToolButton</name>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Press</source>
        <translation>按下</translation>
    </message>
</context>
<context>
    <name>QUndoGroup</name>
    <message>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>復原</translation>
    </message>
</context>
<context>
    <name>QUndoStack</name>
    <message>
        <source>Redo</source>
        <translation>重做</translation>
    </message>
    <message>
        <source>Undo</source>
        <translation>復原</translation>
    </message>
</context>
<context>
    <name>Q3DataTable</name>
    <message>
        <source>True</source>
        <translation>真</translation>
    </message>
    <message>
        <source>False</source>
        <translation>假</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation>刪除</translation>
    </message>
    <message>
        <source>Insert</source>
        <translation>插入</translation>
    </message>
    <message>
        <source>Update</source>
        <translation>更新</translation>
    </message>
</context>
<context>
    <name>QSslSocket</name>
    <message>
        <source>Error creating SSL session: %1</source>
        <translation>建立 SSL 工作階段時發生錯誤：%1</translation>
    </message>
    <message>
        <source>Error creating SSL session, %1</source>
        <translation>建立 SSL 工作階段時發生錯誤：%1</translation>
    </message>
    <message>
        <source>Cannot provide a certificate with no key, %1</source>
        <translation>沒有金鑰無法提供憑證：%1</translation>
    </message>
    <message>
        <source>Unable to write data: %1</source>
        <translation>無法寫入資料：%1</translation>
    </message>
    <message>
        <source>Error during SSL handshake: %1</source>
        <translation>SSL 同步時發生錯誤：%1</translation>
    </message>
    <message>
        <source>Error loading local certificate, %1</source>
        <translation>載入本地憑證時發生錯誤：%1</translation>
    </message>
    <message>
        <source>Invalid or empty cipher list (%1)</source>
        <translation>不合法或空白的加密清單（%1）</translation>
    </message>
    <message>
        <source>Private key does not certificate public key, %1</source>
        <translation>私密金鑰無法認證公開金鑰，%1</translation>
    </message>
    <message>
        <source>Error creating SSL context (%1)</source>
        <translation>建立 SSL 內文時發生錯誤（%1）</translation>
    </message>
    <message>
        <source>Error while reading: %1</source>
        <translation>讀取時發生錯誤：%1</translation>
    </message>
    <message>
        <source>Error loading private key, %1</source>
        <translation>載入私鑰時發生錯誤：%1</translation>
    </message>
</context>
<context>
    <name>QLocalSocket</name>
    <message>
        <source>%1: Connection error</source>
        <translation>%1：連線錯誤</translation>
    </message>
    <message>
        <source>%1: Connection refused</source>
        <translation>%1：連線被拒</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知的錯誤 %2</translation>
    </message>
    <message>
        <source>%1: Socket access error</source>
        <translation>%1：Socket 位址錯誤</translation>
    </message>
    <message>
        <source>%1: Socket resource error</source>
        <translation>%1：Socket 資源錯誤</translation>
    </message>
    <message>
        <source>%1: The socket operation is not supported</source>
        <translation>%1：socket 操作未支援</translation>
    </message>
    <message>
        <source>%1: Invalid name</source>
        <translation>%1：不合法的名稱</translation>
    </message>
    <message>
        <source>%1: Unknown error</source>
        <translation>%1：未知的錯誤</translation>
    </message>
    <message>
        <source>%1: Socket operation timed out</source>
        <translation>%1：Socket 操作逾時</translation>
    </message>
    <message>
        <source>%1: Datagram too large</source>
        <translation>%1：資料包過大</translation>
    </message>
    <message>
        <source>%1: Remote closed</source>
        <translation>%1：遠端已關閉</translation>
    </message>
</context>
<context>
    <name>QtXmlPatterns</name>
    <message>
        <source>A comment cannot contain %1</source>
        <translation>註解不能包含 %1</translation>
    </message>
    <message>
        <source>Version %1 is not supported. The supported XQuery version is 1.0.</source>
        <translation>版本 %1 未支援。支援的 XQuery 版本為 1.0。</translation>
    </message>
    <message>
        <source>The root node of the second argument to function %1 must be a document node. %2 is not a document node.</source>
        <translation>函式 %1 的第二個參數的根節點必須是文件節點。%2 不是文件節點。</translation>
    </message>
    <message>
        <source>The parameter %1 is required, but no corresponding %2 is supplied.</source>
        <translation>需要參數 %1，但是沒有提供相關的 %2。</translation>
    </message>
    <message>
        <source>Namespace declarations must occur before function, variable, and option declarations.</source>
        <translation>命名空間宣告必須在函式、變數與選項宣告之前。</translation>
    </message>
    <message>
        <source>empty</source>
        <translation>空白</translation>
    </message>
    <message>
        <source>The namespace URI cannot be the empty string when binding to a prefix, %1.</source>
        <translation>要與前置字串 %1 結合的命名空間網址不能是空字串。</translation>
    </message>
    <message>
        <source>A comment cannot end with a %1.</source>
        <translation>註解不能以 %1 做結尾。</translation>
    </message>
    <message>
        <source>Top level stylesheet elements must be in a non-null namespace, which %1 isn&apos;t.</source>
        <translation>頂層樣式表元素必須是非空白的命名空間，而 %1 不是。</translation>
    </message>
    <message>
        <source>Integer division (%1) by zero (%2) is undefined.</source>
        <translation>整數除法 %1 除以零（%2）的行為未定義。</translation>
    </message>
    <message>
        <source>A library module cannot be evaluated directly. It must be imported from a main module.</source>
        <translation>不能直接計算函式模組。必須要從主模組匯入。</translation>
    </message>
    <message>
        <source>Time %1:%2:%3.%4 is invalid.</source>
        <translation>時間 %1:%2:%3.%4 不合法。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only the standard attributes can appear.</source>
        <translation>屬性 %1 不能出現在元素 %2。只能有標準屬性。</translation>
    </message>
    <message>
        <source>A value of type %1 must contain an even number of digits. The value %2 does not.</source>
        <translation>型態 %1 的值必須包含偶數個數字。數值 %2 未符合此條件。</translation>
    </message>
    <message>
        <source>Modulus division (%1) by zero (%2) is undefined.</source>
        <translation>餘數除法 %1 除以零（%2）的行為未定義。</translation>
    </message>
    <message>
        <source>No function with signature %1 is available</source>
        <translation>沒有簽章為 %1 的函式可使用</translation>
    </message>
    <message>
        <source>None of the pragma expressions are supported. Therefore, a fallback expression must be present</source>
        <translation>未支援 pragma 敘述。因此，必須有預設的敘述。</translation>
    </message>
    <message>
        <source>In the replacement string, %1 can only be used to escape itself or %2, not %3</source>
        <translation>在取代字串中，%1 只能用於自身或 %2 的脫逸，而非 %3。</translation>
    </message>
    <message>
        <source>The codepoint %1, occurring in %2 using encoding %3, is an invalid XML character.</source>
        <translation>在 %2 內的代碼點 %1（編碼 %3）是一個不合法的 XML 字元。</translation>
    </message>
    <message>
        <source>Network timeout.</source>
        <translation>網路逾時。</translation>
    </message>
    <message>
        <source>No casting is possible with %1 as the target type.</source>
        <translation>不能轉換到 %1 型態。</translation>
    </message>
    <message>
        <source>The Schema Import feature is not supported, and therefore %1 declarations cannot occur.</source>
        <translation>機制匯入功能未支援，因此有 %1 個宣告無法達成。</translation>
    </message>
    <message>
        <source>Attribute %1 and %2 are mutually exclusive.</source>
        <translation>屬性 %1 與 %2 彼此互斥。</translation>
    </message>
    <message>
        <source>Parse error: %1</source>
        <translation>剖析錯誤：%1</translation>
    </message>
    <message>
        <source>If the first argument is the empty sequence or a zero-length string (no namespace), a prefix cannot be specified. Prefix %1 was specified.</source>
        <translation>如果第一個參數是空序列，或是長度為 0 的字串（沒有命名空間），則無法指定前置字串。但是您指定了 %1。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a literal or a variable reference, when used for matching.</source>
        <translation>在 XSL-T 樣式內，函式 %1 的第一個參數必須是文字或變數參考，以便用於比對。</translation>
    </message>
    <message>
        <source>At least one component must be present.</source>
        <translation>必須表達至少一個組件。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already been created.</source>
        <translation>名為 %1 的屬性已被建立。</translation>
    </message>
    <message>
        <source>An argument by name %1 has already been declared. Every argument name must be unique.</source>
        <translation>名稱為 %1 的參數已被宣告。每個參數名稱必須唯一。</translation>
    </message>
    <message>
        <source>%1 is an invalid flag for regular expressions. Valid flags are:</source>
        <translation>%1 是正規表示式中不合法的旗標。合法的旗標有：</translation>
    </message>
    <message>
        <source>At least one %1-element must occur inside %2.</source>
        <translation>至少一個元素 %1 要出現在 %2 之內。</translation>
    </message>
    <message>
        <source>Only the Unicode Codepoint Collation is supported(%1). %2 is unsupported.</source>
        <translation>只支援 Unicode Codepoint Collation（%1）。%2 未支援。</translation>
    </message>
    <message>
        <source>Matches are case insensitive</source>
        <translation>比對為區分大小寫</translation>
    </message>
    <message>
        <source>The name of an extension expression must be in a namespace.</source>
        <translation>延伸敘述的名稱必須在命名空間內。</translation>
    </message>
    <message>
        <source>Each name of a template parameter must be unique; %1 is duplicated.</source>
        <translation>每個樣本參數的名稱必須唯一；%1 已經被使用。</translation>
    </message>
    <message>
        <source>At least one mode must be specified in the %1-attribute on element %2.</source>
        <translation>在元素 %2 的 %1 屬性中至少要指定一個模式。</translation>
    </message>
    <message>
        <source>%1 matches newline characters</source>
        <translation>%1 符合了換行字元</translation>
    </message>
    <message>
        <source>Year %1 is invalid because it begins with %2.</source>
        <translation>年份 %1 不合法，因為是從 %2 開始的。</translation>
    </message>
    <message>
        <source>The second argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>呼叫 %1 的第二個參數不能是 %2 型態。必須是 %3、%4 或 %5 型態。</translation>
    </message>
    <message>
        <source>Element %1 cannot have children.</source>
        <translation>元素 %1 不能有子元素。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Only %3 is allowed, and the standard attributes.</source>
        <translation>屬性 %1 不能出現在元素 %2。只能有 %3 以及標準屬性。</translation>
    </message>
    <message>
        <source>Only one %1-element can appear.</source>
        <translation>只能出現一個元素 %1。</translation>
    </message>
    <message>
        <source>The name for a computed attribute cannot have the namespace URI %1 with the local name %2.</source>
        <translation>在已計算屬性的名稱不能同時有命名空間網址 %1 與本地端名稱 %2。</translation>
    </message>
    <message>
        <source>A positional predicate must evaluate to a single numeric value.</source>
        <translation>位置謂詞必須能計算出單一的數值。</translation>
    </message>
    <message>
        <source>Element %1 can&apos;t be serialized because it appears outside the document element.</source>
        <translation>元素 %1 無法序列化，因為似乎是在文件元素之外。</translation>
    </message>
    <message>
        <source>%1 and %2 match the start and end of a line.</source>
        <translation>%1 與 %2 符合了一行的開始與結尾。</translation>
    </message>
    <message>
        <source>Running an XSL-T 1.0 stylesheet with a 2.0 processor.</source>
        <translation>使用 2.0 處理器執行 XSL-T 1.0 樣式表中。</translation>
    </message>
    <message>
        <source>A stylesheet function must have a prefixed name.</source>
        <translation>樣式表函式必須有前置名稱。</translation>
    </message>
    <message>
        <source>%1 cannot be retrieved</source>
        <translation>%1 無法取得</translation>
    </message>
    <message>
        <source>It&apos;s not possible to cast the value %1 of type %2 to %3</source>
        <translation>無法轉換型態 %2 的數值 %1 到 %3</translation>
    </message>
    <message>
        <source>The value of the XSL-T version attribute must be a value of type %1, which %2 isn&apos;t.</source>
        <translation>XLS-T 版本屬性的值必須是型態 %1 的值，而 %2 不是。</translation>
    </message>
    <message>
        <source>The prefix %1 cannot be bound.</source>
        <translation>前置字串 %1 不能被結合。</translation>
    </message>
    <message>
        <source>The prefix must be a valid %1, which %2 is not.</source>
        <translation>前置字串必須是合法的 %1，但 %2 不是。</translation>
    </message>
    <message>
        <source>The keyword %1 cannot occur with any other mode name.</source>
        <translation>關鍵字 %1 不能與任何其它模式名稱一起存在。</translation>
    </message>
    <message>
        <source>Type error in cast, expected %1, received %2.</source>
        <translation>轉換型態錯誤，應為 %1 但接收到 %2。</translation>
    </message>
    <message>
        <source>%1 is not a valid numeric literal.</source>
        <translation>%1 不是合法的數值。</translation>
    </message>
    <message numerus="yes">
        <source>%1 takes at most %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 最多只能有 %n 個參數，因此 %2 是不合法的。</numerusform>
        </translation>
    </message>
    <message>
        <source>Circularity detected</source>
        <translation>偵測到環狀</translation>
    </message>
    <message>
        <source>A variable by name %1 has already been declared.</source>
        <translation>名為 %1 的變數已被宣告。</translation>
    </message>
    <message>
        <source>The prefix %1 can not be bound. By default, it is already bound to the namespace %2.</source>
        <translation>前置字串 %1 不能被結合。預設它已與命名空間 %2 結合。</translation>
    </message>
    <message>
        <source>An %1-attribute must have a valid %2 as value, which %3 isn&apos;t.</source>
        <translation>屬性 %1 必須以合法的 %2 為值，而 %3 是不合法的。</translation>
    </message>
    <message>
        <source>If element %1 has no attribute %2, it cannot have attribute %3 or %4.</source>
        <translation>若元素 %1 沒有屬性 %2，則也不能有屬性 %3 或 %4。</translation>
    </message>
    <message>
        <source>A function already exists with the signature %1.</source>
        <translation>已經有簽章為 %1 的函式存在。</translation>
    </message>
    <message>
        <source>When casting to %1 from %2, the source value cannot be %3.</source>
        <translation>從 %2 轉換型態為 %1 的時候，來源數值不能是 %3。</translation>
    </message>
    <message>
        <source>Attribute %1 can&apos;t be serialized because it appears at the top level.</source>
        <translation>屬性元素 %1 無法序列化，因為似乎是在頂層。</translation>
    </message>
    <message>
        <source>No comparisons can be done involving the type %1.</source>
        <translation>包含型態 %1 時不能做比較。</translation>
    </message>
    <message>
        <source>No value is available for the external variable by name %1.</source>
        <translation>名為 %1 的外部變數沒有可用的值。</translation>
    </message>
    <message>
        <source>The value of attribute %1 must of type %2, which %3 isn&apos;t.</source>
        <translation>屬性 %1 的值必須為型態 %2，但 %3 不是。</translation>
    </message>
    <message>
        <source>The item %1 did not match the required type %2.</source>
        <translation>項目 %1 未符合需要的型態 %2。</translation>
    </message>
    <message>
        <source>Element %1 cannot have a sequence constructor.</source>
        <translation>元素 %1不能有序列建構子。</translation>
    </message>
    <message>
        <source>When attribute %1 is present on %2, a sequence constructor cannot be used.</source>
        <translation>當屬性 %1 出現在 %2 內時，不能使用序列建構子。</translation>
    </message>
    <message>
        <source>one or more</source>
        <translation>一個以上</translation>
    </message>
    <message>
        <source>The encoding %1 is invalid. It must contain Latin characters only, must not contain whitespace, and must match the regular expression %2.</source>
        <translation>編碼 %1 不合法。必須只能包含拉丁字元，不含空白，並且要符合正規表示式 %2。</translation>
    </message>
    <message numerus="yes">
        <source>%1 requires at least %n argument(s). %2 is therefore invalid.</source>
        <translation>
            <numerusform>%1 至少需要 %n 個參數，因此 %2 是不合法的。</numerusform>
        </translation>
    </message>
    <message>
        <source>The target name in a processing instruction cannot be %1 in any combination of upper and lower case. Therefore, is %2 invalid.</source>
        <translation>處理指令的目標名稱不能是任何大小寫組合的 %1。因此，%2 是不合法的值。</translation>
    </message>
    <message>
        <source>The focus is undefined.</source>
        <translation>焦點未定義。</translation>
    </message>
    <message>
        <source>%1 is an unknown schema type.</source>
        <translation>%1 是未知的機制型態。</translation>
    </message>
    <message>
        <source>The value for attribute %1 on element %2 must either be %3 or %4, not %5.</source>
        <translation>元素 %2 內屬性 %1 的值必須是 %3 或 %4，而不是 %5。</translation>
    </message>
    <message>
        <source>In the replacement string, %1 must be followed by at least one digit when not escaped.</source>
        <translation>在取代字串中，在未脫逸的情形下 %1 必須至少跟著一位數字。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, axis %1 cannot be used, only axis %2 or %3 can.</source>
        <translation>在 XSL-T 樣式內，不能用 %1 軸，只能用 %2 或 %3。</translation>
    </message>
    <message>
        <source>The namespace for a user defined function cannot be empty (try the predefined prefix %1 which exists for cases like this)</source>
        <translation>使用者定義函式的命名空間不能為空白（請試著用預先定義的前置字串 %1）</translation>
    </message>
    <message>
        <source>The first operand in an integer division, %1, cannot be infinity (%2).</source>
        <translation>整數除法的第一個運算對象 %1 不能是無限大（%2）。</translation>
    </message>
    <message>
        <source>%1 is not a valid value of type %2.</source>
        <translation>%1 不是合法的 %2 型態的值。</translation>
    </message>
    <message>
        <source>Multiplication of a value of type %1 by %2 or %3 (plus or minus infinity) is not allowed.</source>
        <translation>將型態 %1 乘以 %2 或 %3（正或負無限大）是不允許的。</translation>
    </message>
    <message>
        <source>The variable %1 is unused</source>
        <translation>變數 %1 未使用</translation>
    </message>
    <message>
        <source>The %1-axis is unsupported in XQuery</source>
        <translation>XQuery 中未支援 %1 軸</translation>
    </message>
    <message>
        <source>A direct element constructor is not well-formed. %1 is ended with %2.</source>
        <translation>直接元素建構器沒有完整產生。%1 以 %2 結束。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 or %3 (plus or minus zero) is not allowed.</source>
        <translation>將型態 %1 除以 %2 或 %3（正或負零）是不允許的。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot have the value %2.</source>
        <translation>屬性 %1 的值不能為 %2。</translation>
    </message>
    <message>
        <source>It will not be possible to retrieve %1.</source>
        <translation>無法取得 %1。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, function %1 cannot have a third argument.</source>
        <translation>在 XSL-T 樣式內，函式 %1 的不能有第三個參數。</translation>
    </message>
    <message>
        <source>The namespace URI in the name for a computed attribute cannot be %1.</source>
        <translation>在已計算屬性的名稱的命名空間網址不能是 %1。</translation>
    </message>
    <message>
        <source>%1 is not a valid target name in a processing instruction. It must be a %2 value, e.g. %3.</source>
        <translation>%1 不是一個合法的處理指令的目標名稱。必須是 %2 的值，例如 %3。</translation>
    </message>
    <message>
        <source>%1 is an complex type. Casting to complex types is not possible. However, casting to atomic types such as %2 works.</source>
        <translation>%1 是複數型態，無法轉換成複數型態。然而，轉換為原型態，如 %2 是可行的。</translation>
    </message>
    <message>
        <source>zero or one</source>
        <translation>0 或 1 個</translation>
    </message>
    <message>
        <source>No operand in an integer division, %1, can be %2.</source>
        <translation>整數除法沒有運作對象，%1，可以是 %2。</translation>
    </message>
    <message>
        <source>The element with local name %1 does not exist in XSL-T.</source>
        <translation>有本地名稱 %1 的元素在 XSL-T 內不存在。</translation>
    </message>
    <message>
        <source>Two namespace declaration attributes have the same name: %1.</source>
        <translation>有兩個命名空間宣告的屬性有相同的名稱：%1。</translation>
    </message>
    <message>
        <source>Effective Boolean Value cannot be calculated for a sequence containing two or more atomic values.</source>
        <translation>實際布林值（Effective Boolean）無法用在兩個或兩個以上的原數值（atomic value）的計算。</translation>
    </message>
    <message>
        <source>%1 is an invalid %2</source>
        <translation>%1 是不合法的 %2</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be a numeric type, xs:yearMonthDuration or xs:dayTimeDuration.</source>
        <translation>呼叫 %1 的第一個參數不能是 %2 型態。必須是數值型態，xs.yearMonthDuration 或 xs.dayTimeDuration。</translation>
    </message>
    <message>
        <source>Division (%1) by zero (%2) is undefined.</source>
        <translation>除法 %1 除以零（%2）的行為未定義。</translation>
    </message>
    <message>
        <source>No template by name %1 exists.</source>
        <translation>沒有名為 %1 的樣本存在。</translation>
    </message>
    <message>
        <source>The attribute %1 must appear on element %2.</source>
        <translation>屬性 %1 必須在元素 %2 內出現。</translation>
    </message>
    <message>
        <source>An attribute by name %1 has already appeared on this element.</source>
        <translation>名為 %1 的屬性已出現在此元素。</translation>
    </message>
    <message>
        <source>The default collection is undefined</source>
        <translation>預設的收藏未定義</translation>
    </message>
    <message>
        <source>Only the prefix %1 can be bound to %2 and vice versa.</source>
        <translation>只有前置字串 %1 能與 %2 結合。反之亦然。</translation>
    </message>
    <message>
        <source>Value %1 of type %2 exceeds maximum (%3).</source>
        <translation>型態 %2 的數值 %1 已超過最大值（%3）。</translation>
    </message>
    <message>
        <source>Whitespace characters are removed, except when they appear in character classes</source>
        <translation>空白字元已移除，除非它們出現在字元類別</translation>
    </message>
    <message>
        <source>Casting to %1 is not possible because it is an abstract type, and can therefore never be instantiated.</source>
        <translation>無法轉換到 %1 因為它是一個抽象型態，不能被實體化。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on type %2.</source>
        <translation>操作元 %1 不能用於型態 %2。</translation>
    </message>
    <message>
        <source>The namespace %1 is reserved; therefore user defined functions may not use it. Try the predefined prefix %2, which exists for these cases.</source>
        <translation>命名空間 %1 已被保留，因此使用者定義函式不能使用它。請試試預定義前置字串 %2。</translation>
    </message>
    <message>
        <source>The target namespace of a %1 cannot be empty.</source>
        <translation>%1 的目標命名空間不能是空的。</translation>
    </message>
    <message>
        <source>%1 must be followed by %2 or %3, not at the end of the replacement string.</source>
        <translation>%1 後面必須跟著 %2 或 %3，而非取代字串的結尾。</translation>
    </message>
    <message>
        <source>%1 is an invalid namespace URI.</source>
        <translation>%1 是不合法的命名空間網址。</translation>
    </message>
    <message>
        <source>The attribute %1 cannot appear on %2, when it is a child of %3.</source>
        <translation>屬性 %1 不能出現在 %2，因為它是 %3 的子元素。</translation>
    </message>
    <message>
        <source>The attribute %1 can only appear on the first %2 element.</source>
        <translation>屬性 %1 只能出現在前 %2 個元素內。</translation>
    </message>
    <message>
        <source>Element %1 must have either a %2-attribute or a sequence constructor.</source>
        <translation>元素 %1 必須至少有一個屬性 %2 或一個序列建構子。</translation>
    </message>
    <message>
        <source>Module imports must occur before function, variable, and option declarations.</source>
        <translation>模組匯入必須在函式、變數與選項宣告之前。</translation>
    </message>
    <message>
        <source>Day %1 is outside the range %2..%3.</source>
        <translation>日期 %1 已超出 %2 到 %3 的範圍。</translation>
    </message>
    <message>
        <source>%1 contains octets which are disallowed in the requested encoding %2.</source>
        <translation>%1 包含了在要求的編碼 %2 內不允許的八進位值。</translation>
    </message>
    <message>
        <source>When a parameter is required, a default value cannot be supplied through a %1-attribute or a sequence constructor.</source>
        <translation>當需要參數時，不能透過屬性 %1 或序列建構子提供預設值。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, the first argument to function %1 must be a string literal, when used for matching.</source>
        <translation>在 XSL-T 樣式內，函式 %1 的第一個參數必須是字串，以便用於比對。</translation>
    </message>
    <message>
        <source>Text nodes are not allowed at this location.</source>
        <translation>文字節點不能在此位置。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot be a predicate. A predicate must have either a numeric type or an Effective Boolean Value type.</source>
        <translation>型態 %1 的值不能是謂詞（predicate）。謂詞必須是數值型態，或是實際布林值。</translation>
    </message>
    <message>
        <source>%1 is not a valid name for a processing-instruction.</source>
        <translation>%1 不是處理指令的合法名稱。</translation>
    </message>
    <message>
        <source>%1 was called.</source>
        <translation>%1 已被呼叫。</translation>
    </message>
    <message>
        <source>It&apos;s not possible to add attributes after any other kind of node.</source>
        <translation>不能在任何其它種類的節點後面加入屬性。</translation>
    </message>
    <message>
        <source>At least one %1-element must occur before %2.</source>
        <translation>至少一個元素 %1 要出現在 %2 之前。</translation>
    </message>
    <message>
        <source>The normalization form %1 is unsupported. The supported forms are %2, %3, %4, and %5, and none, i.e. the empty string (no normalization).</source>
        <translation>未支援常態化表單 %1。支援的表單有 %2、%3、%4、%5，以及無（也就是空字串，未常態化）。</translation>
    </message>
    <message>
        <source>When casting to %1 or types derived from it, the source value must be of the same type, or it must be a string literal. Type %2 is not allowed.</source>
        <translation>轉換為型態 %1 或其衍生型態時，來源數值必須是相同型態，或者是字串。型態 %2 是不被允許的。</translation>
    </message>
    <message>
        <source>A parameter in a function cannot be declared to be a tunnel.</source>
        <translation>函式內的參數不能被宣告為通道（tunnel）。</translation>
    </message>
    <message>
        <source>XSL-T attributes on XSL-T elements must be in the null namespace, not in the XSL-T namespace which %1 is.</source>
        <translation>XSL-T 元素內的 XSL-T 屬性必須放在空（null）的命名空間，而不是像 %1 在 XSL-T 命名空間。</translation>
    </message>
    <message>
        <source>The namespace of a user defined function in a library module must be equivalent to the module namespace. In other words, it should be %1 instead of %2</source>
        <translation>在函式模組中的使用者定義函式的命名空間必須與模組的命名空間相同。也就是，應該為 %1 而不是 %2。</translation>
    </message>
    <message>
        <source>Day %1 is invalid for month %2.</source>
        <translation>月份 %2 中沒有日期 %1。</translation>
    </message>
    <message>
        <source>Overflow: Can&apos;t represent date %1.</source>
        <translation>溢位：無法表示日期 %1。</translation>
    </message>
    <message>
        <source>In a simplified stylesheet module, attribute %1 must be present.</source>
        <translation>在簡化的樣式表模組中，屬性 %1 必須存在。</translation>
    </message>
    <message>
        <source>Unknown XSL-T attribute %1.</source>
        <translation>未知的 XSL-T 屬性 %1。</translation>
    </message>
    <message>
        <source>It is not possible to redeclare prefix %1.</source>
        <translation>無法重宣告前置字串 %1。</translation>
    </message>
    <message>
        <source>exactly one</source>
        <translation>剛好一個</translation>
    </message>
    <message>
        <source>%1 is an invalid regular expression pattern: %2</source>
        <translation>%1 是不合法的正規表示式樣式：%2</translation>
    </message>
    <message>
        <source>Element %1 is not allowed at this location.</source>
        <translation>元素 %1 不能在此位置。</translation>
    </message>
    <message>
        <source>The Schema Validation Feature is not supported. Hence, %1-expressions may not be used.</source>
        <translation>未支援機制確認功能。%1 敘述無法使用。</translation>
    </message>
    <message>
        <source>At least one %1 element must appear as child of %2.</source>
        <translation>%2 必須至少有一個子元素 %1。</translation>
    </message>
    <message>
        <source>This processor is not Schema-aware and therefore %1 cannot be used.</source>
        <translation>此處理器不是 Schema-aware，因此不能使用 %1。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, and the standard attributes.</source>
        <translation>屬性 %1 不能出現在元素 %2。只能有 %3 以及標準屬性。</translation>
    </message>
    <message>
        <source>Dividing a value of type %1 by %2 (not-a-number) is not allowed.</source>
        <translation>將型態 %1 除以 %2（非數值）是不允許的。</translation>
    </message>
    <message>
        <source>Required cardinality is %1; got cardinality %2.</source>
        <translation>需要的基數為 %1；得到的是 %2。</translation>
    </message>
    <message>
        <source>A construct was encountered which only is allowed in XQuery.</source>
        <translation>遇到了建構，實際上只能允許在 XQuery 內。</translation>
    </message>
    <message>
        <source>No function by name %1 is available.</source>
        <translation>沒有名為 %1 的函式。</translation>
    </message>
    <message>
        <source>The URI cannot have a fragment</source>
        <translation>URI 不能有片段</translation>
    </message>
    <message>
        <source>%1 is not an atomic type. Casting is only possible to atomic types.</source>
        <translation>%1 不是一個原型態。只能轉換為原型態。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2.</source>
        <translation>呼叫 %1 的第一個參數不能是 %2 型態。</translation>
    </message>
    <message>
        <source>The namespace URI must be a constant and cannot use enclosed expressions.</source>
        <translation>命名空間網址必須是常數，並且不能使用封閉敘述。</translation>
    </message>
    <message>
        <source>Prefix %1 is already declared in the prolog.</source>
        <translation>前置字串 %1 已在 prolog 中宣告。</translation>
    </message>
    <message>
        <source>Ambiguous rule match.</source>
        <translation>不明確的規則符合。</translation>
    </message>
    <message>
        <source>Promoting %1 to %2 may cause loss of precision.</source>
        <translation>將 %1 抬升為 %2 可能會失去精確度。</translation>
    </message>
    <message>
        <source>In an XSL-T pattern, only function %1 and %2, not %3, can be used for matching.</source>
        <translation>在 XSL-T 樣式內，只有函式 %1，%2 可以用於比對。%3 不行。</translation>
    </message>
    <message>
        <source>A default namespace declaration must occur before function, variable, and option declarations.</source>
        <translation>預設的命名空間宣告必須在函式、變數與選項宣告之前。</translation>
    </message>
    <message>
        <source>Operator %1 cannot be used on atomic values of type %2 and %3.</source>
        <translation>操作元 %1 不能用於型態 %2 與 %3 的原數值。</translation>
    </message>
    <message>
        <source>The module import feature is not supported</source>
        <translation>不支援模組匯入功能</translation>
    </message>
    <message>
        <source>The parameter %1 is passed, but no corresponding %2 exists.</source>
        <translation>參數 %1 已傳送，但找不到相關的 %2。</translation>
    </message>
    <message>
        <source>A value of type %1 cannot have an Effective Boolean Value.</source>
        <translation>型態 %1 不能有實際布林值。</translation>
    </message>
    <message>
        <source>The data of a processing instruction cannot contain the string %1</source>
        <translation>處理指令的資料不能包含字串 %1</translation>
    </message>
    <message>
        <source>Time 24:%1:%2.%3 is invalid. Hour is 24, but minutes, seconds, and milliseconds are not all 0; </source>
        <translation>時間 24:%1:%2.%3 不合法。小時為 24 十，分、秒與毫秒都必須是 0； </translation>
    </message>
    <message>
        <source>A template by name %1 has already been declared.</source>
        <translation>名為 %1 的屬性已被宣告。</translation>
    </message>
    <message>
        <source>It is not possible to bind to the prefix %1</source>
        <translation>無法與前置字串 %1 結合。</translation>
    </message>
    <message>
        <source>Value %1 of type %2 is below minimum (%3).</source>
        <translation>型態 %2 的數值 %1 已低過最小值（%3）。</translation>
    </message>
    <message>
        <source>Required type is %1, but %2 was found.</source>
        <translation>需要的型態為 %1，但找到 %2。</translation>
    </message>
    <message>
        <source>%1 is an unsupported encoding.</source>
        <translation>%1 是個未被支援的編碼。</translation>
    </message>
    <message>
        <source>The name of an option must have a prefix. There is no default namespace for options.</source>
        <translation>選項名稱必須有前置字串。沒有選項的預設命名空間。</translation>
    </message>
    <message>
        <source>Element %1 must come last.</source>
        <translation>元素 %1 必須最後出現。</translation>
    </message>
    <message>
        <source>Attribute %1 cannot appear on the element %2. Allowed is %3, %4, and the standard attributes.</source>
        <translation>屬性 %1 不能出現在元素 %2。只能有 %3，%4 以及標準屬性。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1 in %2</source>
        <translation>在 %2 的前置字串 %1 沒有結合命名空間</translation>
    </message>
    <message>
        <source>The name %1 does not refer to any schema type.</source>
        <translation>名稱 %1 未指向任何機制型態。</translation>
    </message>
    <message>
        <source>Prefix %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>前置字串 %1 只能與 %2 結合（也就是說，要預先定義）。</translation>
    </message>
    <message>
        <source>The initialization of variable %1 depends on itself</source>
        <translation>變數 %1 的初始化與自身相依。</translation>
    </message>
    <message>
        <source>An attribute node cannot be a child of a document node. Therefore, the attribute %1 is out of place.</source>
        <translation>屬性點不能做為文件點的子節點。因此，屬性 %1 的位置不合適。</translation>
    </message>
    <message>
        <source>Month %1 is outside the range %2..%3.</source>
        <translation>月份 %1 已超出 %2 到 %3 的範圍。</translation>
    </message>
    <message>
        <source>The name of a variable bound in a for-expression must be different from the positional variable. Hence, the two variables named %1 collide.</source>
        <translation>與 for 敘述結合的變數名稱必須與位置變數不同。因此，有兩個名為 %1 的變數衝突了。</translation>
    </message>
    <message>
        <source>No namespace binding exists for the prefix %1</source>
        <translation>前置字串 %1 沒有結合命名空間</translation>
    </message>
    <message>
        <source>An %1-attribute with value %2 has already been declared.</source>
        <translation>已宣告屬性 %1 的值為 %2。</translation>
    </message>
    <message>
        <source>%1 is not valid as a value of type %2.</source>
        <translation>%1 不是合法的 %2 型態的值。</translation>
    </message>
    <message>
        <source>zero or more</source>
        <translation>0 個以上</translation>
    </message>
    <message>
        <source>%1 is not in the in-scope attribute declarations. Note that the schema import feature is not supported.</source>
        <translation>%1 不是範圍內屬性宣告。注意機制匯入功能未支援。</translation>
    </message>
    <message>
        <source>When function %1 is used for matching inside a pattern, the argument must be a variable reference or a string literal.</source>
        <translation>當函式 %1 用於樣式比對時，參數必須是變數參考或字串。</translation>
    </message>
    <message>
        <source>%1 is an invalid template mode name.</source>
        <translation>%1 不是合法的樣本模式名稱。</translation>
    </message>
    <message>
        <source>At least one time component must appear after the %1-delimiter.</source>
        <translation>在分隔符 %1 後必須至少有一個時間組件。</translation>
    </message>
    <message>
        <source>Overflow: Date can&apos;t be represented.</source>
        <translation>溢位：無法表示日期。</translation>
    </message>
    <message>
        <source>Operator %1 is not available between atomic values of type %2 and %3.</source>
        <translation>操作元 %1 不能用於型態 %2 與 %3 的原數值。</translation>
    </message>
    <message>
        <source>A zone offset must be in the range %1..%2 inclusive. %3 is out of range.</source>
        <translation>區域位移必須是在 %1 到 %2 範圍之內。%3 已超出範圍。</translation>
    </message>
    <message>
        <source>%1 is not a valid XML 1.0 character.</source>
        <translation>%1 不是合法的 XML 1.0 字元。</translation>
    </message>
    <message>
        <source>The first argument to %1 cannot be of type %2. It must be of type %3, %4, or %5.</source>
        <translation>呼叫 %1 的第一個參數不能是 %2 型態。必須是 %3、%4 或 %5 型態。</translation>
    </message>
    <message>
        <source>%1 is not a whole number of minutes.</source>
        <translation>%1 不是分鐘的數值。</translation>
    </message>
    <message>
        <source>Failure when casting from %1 to %2: %3</source>
        <translation>從 %1 轉換到 %2 時失敗：%3</translation>
    </message>
    <message>
        <source>It is not possible to cast from %1 to %2.</source>
        <translation>不能從 %1 轉換到 %2。</translation>
    </message>
    <message>
        <source>No variable by name %1 exists</source>
        <translation>沒有名為 %1 的變數存在</translation>
    </message>
    <message>
        <source>Namespace %1 can only be bound to %2 (and it is, in either case, pre-declared).</source>
        <translation>命名空間 %1 只能與 %2 結合（也就是說，要預先定義）。</translation>
    </message>
    <message>
        <source>The second operand in a division, %1, cannot be zero (%2).</source>
        <translation>整數除法的第二個運算對象 %1 不能是零（%2）。</translation>
    </message>
    <message>
        <source>Only one %1 declaration can occur in the query prolog.</source>
        <translation>只有一個 %1 宣告可以在查詢中。</translation>
    </message>
    <message>
        <source>Element %1 must have at least one of the attributes %2 or %3.</source>
        <translation>元素 %1 必須至少有屬性 %2 或 %3 其中一個。</translation>
    </message>
    <message>
        <source>If both values have zone offsets, they must have the same zone offset. %1 and %2 are not the same.</source>
        <translation>如果兩個值都有區域位移，則必須是相同的區域位移。%1 與 %2 並不相同。</translation>
    </message>
    <message>
        <source>No external functions are supported. All supported functions can be used directly, without first declaring them as external</source>
        <translation>不支援外部函式。所有支援的含式可以直接使用而不需要先宣告為外部函式。</translation>
    </message>
    <message>
        <source>The last step in a path must contain either nodes or atomic values. It cannot be a mixture between the two.</source>
        <translation>路徑的最後一步必須是節點或原值，而不能在兩者之間。</translation>
    </message>
</context>
<context>
    <name>QFontDialog</name>
    <message>
        <source>&amp;Font</source>
        <translation>字型(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Sample</source>
        <translation>範例</translation>
    </message>
    <message>
        <source>Font st&amp;yle</source>
        <translation>字型樣式(&amp;Y)</translation>
    </message>
    <message>
        <source>Wr&amp;iting System</source>
        <translation>寫入系統(&amp;I)</translation>
    </message>
    <message>
        <source>Select Font</source>
        <translation>選擇字型</translation>
    </message>
    <message>
        <source>&amp;Underline</source>
        <translation>底線(&amp;U)</translation>
    </message>
    <message>
        <source>Effects</source>
        <translation>效果</translation>
    </message>
    <message>
        <source>Stri&amp;keout</source>
        <translation>刪除線(&amp;K)</translation>
    </message>
</context>
<context>
    <name>Q3Wizard</name>
    <message>
        <source>&amp;Help</source>
        <translation>說明(&amp;H)</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation>取消(&amp;C)</translation>
    </message>
    <message>
        <source>&amp;Finish</source>
        <translation>完成(&amp;F)</translation>
    </message>
    <message>
        <source>&amp;Next &gt;</source>
        <translation>下一個(&amp;N)＞</translation>
    </message>
    <message>
        <source>&lt; &amp;Back</source>
        <translation>＜返回(&amp;B)</translation>
    </message>
</context>
<context>
    <name>QWorkspace</name>
    <message>
        <source>&amp;Move</source>
        <translation>移動(&amp;M)</translation>
    </message>
    <message>
        <source>&amp;Size</source>
        <translation>大小(&amp;S)</translation>
    </message>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Stay on &amp;Top</source>
        <translation>留在頂端(&amp;T)</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation>關閉(&amp;C)</translation>
    </message>
    <message>
        <source>%1 - [%2]</source>
        <translation>%1 - [%2]</translation>
    </message>
    <message>
        <source>Sh&amp;ade</source>
        <translation>遮蔽(&amp;A)</translation>
    </message>
    <message>
        <source>&amp;Restore</source>
        <translation>回復(&amp;R)</translation>
    </message>
    <message>
        <source>&amp;Unshade</source>
        <translation>取消遮蔽(&amp;U)</translation>
    </message>
    <message>
        <source>Mi&amp;nimize</source>
        <translation>最小化(&amp;N)</translation>
    </message>
    <message>
        <source>Ma&amp;ximize</source>
        <translation>最大化(&amp;X)</translation>
    </message>
    <message>
        <source>Restore Down</source>
        <translation>向下恢復</translation>
    </message>
</context>
<context>
    <name>QColorDialog</name>
    <message>
        <source>&amp;Pick Screen Color</source>
        <translation>螢幕取色(&amp;P)</translation>
    </message>
    <message>
        <source>Cursor at %1, %2
Press ESC to cancel</source>
        <translation>游標位置：%1, %2
按 Esc 取消</translation>
    </message>
    <message>
        <source>&amp;Red:</source>
        <translation>紅(&amp;R)：</translation>
    </message>
    <message>
        <source>&amp;Sat:</source>
        <translation>飽和度(&amp;S)：</translation>
    </message>
    <message>
        <source>&amp;Val:</source>
        <translation>亮度(&amp;V)：</translation>
    </message>
    <message>
        <source>Hu&amp;e:</source>
        <translation>色調(&amp;E)：</translation>
    </message>
    <message>
        <source>Select Color</source>
        <translation>選擇色彩</translation>
    </message>
    <message>
        <source>&amp;Add to Custom Colors</source>
        <translation>新增到自訂色彩(&amp;A)</translation>
    </message>
    <message>
        <source>Bl&amp;ue:</source>
        <translation>藍(&amp;U)：</translation>
    </message>
    <message>
        <source>&amp;Green:</source>
        <translation>綠(&amp;G)：</translation>
    </message>
    <message>
        <source>&amp;Basic colors</source>
        <translation>基本色彩(&amp;B)</translation>
    </message>
    <message>
        <source>&amp;Custom colors</source>
        <translation>自訂色彩(&amp;C)</translation>
    </message>
    <message>
        <source>A&amp;lpha channel:</source>
        <translation>Alpha 色頻(&amp;L)：</translation>
    </message>
</context>
<context>
    <name>QSharedMemory</name>
    <message>
        <source>%1: system-imposed size restrictions</source>
        <translation>%1：系統大小限制</translation>
    </message>
    <message>
        <source>%1: unix key file doesn&apos;t exists</source>
        <translation>%1：unix 鍵值檔不存在</translation>
    </message>
    <message>
        <source>%1: doesn&apos;t exists</source>
        <translation>%1：不存在</translation>
    </message>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：鍵值是空的</translation>
    </message>
    <message>
        <source>%1: key error</source>
        <translation>%1：鍵值錯誤</translation>
    </message>
    <message>
        <source>%1: create size is less then 0</source>
        <translation>%1：建立大小小於 0</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知的錯誤 %2</translation>
    </message>
    <message>
        <source>%1: invalid size</source>
        <translation>%1：不合法的大小</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：無法產生鍵值</translation>
    </message>
    <message>
        <source>%1: unable to set key on lock</source>
        <translation>%1：無法設定鍵值</translation>
    </message>
    <message>
        <source>%1: unable to unlock</source>
        <translation>%1：無法解除鎖定</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失敗</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：資源不足</translation>
    </message>
    <message>
        <source>%1: not attached</source>
        <translation>%1：未附加</translation>
    </message>
    <message>
        <source>%1: size query failed</source>
        <translation>%1：大小查詢失敗</translation>
    </message>
    <message>
        <source>%1: unable to lock</source>
        <translation>%1：無法鎖定</translation>
    </message>
</context>
<context>
    <name>QXmlStream</name>
    <message>
        <source>Reference to unparsed entity &apos;%1&apos;.</source>
        <translation>參考到未剖析的實體 %1。</translation>
    </message>
    <message>
        <source>Unexpected character &apos;%1&apos; in public id literal.</source>
        <translation>在公開代碼字元中遇到非預期的字元 %1。</translation>
    </message>
    <message>
        <source>Illegal namespace declaration.</source>
        <translation>不合法的命名空間宣告。</translation>
    </message>
    <message>
        <source>Invalid XML character.</source>
        <translation>不合法的 XML 字元。</translation>
    </message>
    <message>
        <source>Expected character data.</source>
        <translation>預期的字元資料。</translation>
    </message>
    <message>
        <source>Standalone accepts only yes or no.</source>
        <translation>獨立實體只接受 yes 或 no。</translation>
    </message>
    <message>
        <source>Invalid XML version string.</source>
        <translation>不合法的 XML 版本字串。</translation>
    </message>
    <message>
        <source>Invalid processing instruction name.</source>
        <translation>不合法的處理指令名稱。</translation>
    </message>
    <message>
        <source>Namespace prefix &apos;%1&apos; not declared</source>
        <translation>命名空間的前置字串 %1 未宣告</translation>
    </message>
    <message>
        <source>Entity &apos;%1&apos; not declared.</source>
        <translation>實體 %1 未宣告。</translation>
    </message>
    <message>
        <source>%1 is an invalid processing instruction name.</source>
        <translation>%1 是不合法的處理指令名稱。</translation>
    </message>
    <message>
        <source>The standalone pseudo attribute must appear after the encoding.</source>
        <translation>獨立的虛擬屬性必須在編碼之後出現。</translation>
    </message>
    <message>
        <source>Sequence &apos;]]&gt;&apos; not allowed in content.</source>
        <translation>在內文中不允許有序列 &quot;]]&gt;&quot;。</translation>
    </message>
    <message>
        <source>%1 is an invalid encoding name.</source>
        <translation>%1 為不合法的編碼名稱。</translation>
    </message>
    <message>
        <source>, but got &apos;</source>
        <translation>，但是得到的是</translation>
    </message>
    <message>
        <source>Start tag expected.</source>
        <translation>預期應有開始標籤。</translation>
    </message>
    <message>
        <source>Invalid character reference.</source>
        <translation>不合法的字元參考。</translation>
    </message>
    <message>
        <source>Reference to external entity &apos;%1&apos; in attribute value.</source>
        <translation>在屬性值中參考到外部實體 %1。</translation>
    </message>
    <message>
        <source>Expected </source>
        <translation>預期應為 </translation>
    </message>
    <message>
        <source>Invalid document.</source>
        <translation>不合法的文件。</translation>
    </message>
    <message>
        <source>Opening and ending tag mismatch.</source>
        <translation>開啟與結束的標籤不對稱。</translation>
    </message>
    <message>
        <source>Encountered incorrectly encoded content.</source>
        <translation>遇到不正確的編碼內容。</translation>
    </message>
    <message>
        <source>Invalid attribute in XML declaration.</source>
        <translation>XML 宣告中有不合法的屬性。</translation>
    </message>
    <message>
        <source>Attribute redefined.</source>
        <translation>屬性重定義。</translation>
    </message>
    <message>
        <source>%1 is an invalid PUBLIC identifier.</source>
        <translation>%1 為不合法的 PUBLIC 識別子。</translation>
    </message>
    <message>
        <source>Extra content at end of document.</source>
        <translation>文件尾端有多餘的內容。</translation>
    </message>
    <message>
        <source>Invalid XML name.</source>
        <translation>不合法的 XML 名稱。</translation>
    </message>
    <message>
        <source>Premature end of document.</source>
        <translation>文件結尾不正確。</translation>
    </message>
    <message>
        <source>XML declaration not at start of document.</source>
        <translation>XML 宣告沒有在文件開始處。</translation>
    </message>
    <message>
        <source>Recursive entity detected.</source>
        <translation>偵測到遞迴實體。</translation>
    </message>
    <message>
        <source>Unsupported XML version.</source>
        <translation>未支援的 XML 版本。</translation>
    </message>
    <message>
        <source>Unexpected &apos;</source>
        <translation>非預期</translation>
    </message>
    <message>
        <source>Invalid entity value.</source>
        <translation>不合法的實體值。</translation>
    </message>
    <message>
        <source>Encoding %1 is unsupported</source>
        <translation>不支援編碼 %1。</translation>
    </message>
    <message>
        <source>NDATA in parameter entity declaration.</source>
        <translation>在參數實體宣告有 NDATA。</translation>
    </message>
</context>
<context>
    <name>QProcess</name>
    <message>
        <source>Error writing to process</source>
        <translation>寫入行程時發生錯誤</translation>
    </message>
    <message>
        <source>Resource error (fork failure): %1</source>
        <translation>資源錯誤（fork 失敗）：%1</translation>
    </message>
    <message>
        <source>Error reading from process</source>
        <translation>從行程讀取時發生錯誤</translation>
    </message>
    <message>
        <source>Process failed to start</source>
        <translation>啟動行程失敗</translation>
    </message>
    <message>
        <source>Could not open input redirection for reading</source>
        <translation>無法開啟輸入導向以讀取</translation>
    </message>
    <message>
        <source>Could not open output redirection for writing</source>
        <translation>無法開啟輸出導向以寫入</translation>
    </message>
    <message>
        <source>Process operation timed out</source>
        <translation>行程操作逾時</translation>
    </message>
    <message>
        <source>Process crashed</source>
        <translation>行程已崩潰</translation>
    </message>
</context>
<context>
    <name>QNativeSocketEngine</name>
    <message>
        <source>The proxy type is invalid for this operation</source>
        <translation>代理伺服器型態無法支援此操作</translation>
    </message>
    <message>
        <source>Network operation timed out</source>
        <translation>網路操作逾時</translation>
    </message>
    <message>
        <source>The remote host closed the connection</source>
        <translation>遠端主機關閉了連線</translation>
    </message>
    <message>
        <source>Invalid socket descriptor</source>
        <translation>不合法的 socket 描述子</translation>
    </message>
    <message>
        <source>Host unreachable</source>
        <translation>無法連線到主機</translation>
    </message>
    <message>
        <source>Protocol type not supported</source>
        <translation>協定型態未支援</translation>
    </message>
    <message>
        <source>Datagram was too large to send</source>
        <translation>資料過大無法送出</translation>
    </message>
    <message>
        <source>Attempt to use IPv6 socket on a platform with no IPv6 support</source>
        <translation>試圖在沒有 IPv6 支援的平台上使用 IPv6 socket</translation>
    </message>
    <message>
        <source>Unable to receive a message</source>
        <translation>無法接收訊息</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>權限不足</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>連線被拒</translation>
    </message>
    <message>
        <source>Unable to write</source>
        <translation>無法寫入</translation>
    </message>
    <message>
        <source>Another socket is already listening on the same port</source>
        <translation>另一個 socket 已經在監聽同一個連接埠</translation>
    </message>
    <message>
        <source>Unable to send a message</source>
        <translation>無法送出訊息</translation>
    </message>
    <message>
        <source>The bound address is already in use</source>
        <translation>結合的位址已經在使用中</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>連線逾時</translation>
    </message>
    <message>
        <source>Network error</source>
        <translation>網路錯誤</translation>
    </message>
    <message>
        <source>Unsupported socket operation</source>
        <translation>未支援的 socket 操作</translation>
    </message>
    <message>
        <source>Operation on non-socket</source>
        <translation>對非 socket 操作</translation>
    </message>
    <message>
        <source>Unable to initialize broadcast socket</source>
        <translation>無法初始化廣播 socket</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
    <message>
        <source>Unable to initialize non-blocking socket</source>
        <translation>無法初始化非阻擋性 socket</translation>
    </message>
    <message>
        <source>The address is protected</source>
        <translation>此位址已被保護</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>無法使用網路</translation>
    </message>
    <message>
        <source>The address is not available</source>
        <translation>無法取得位址</translation>
    </message>
    <message>
        <source>Out of resources</source>
        <translation>資源不足</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFtpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>找不到合適的代理伺服器</translation>
    </message>
    <message>
        <source>Error while downloading %1: %2</source>
        <translation>下載 %1 時發生錯誤：%2</translation>
    </message>
    <message>
        <source>Error while uploading %1: %2</source>
        <translation>上傳 %1 時發生錯誤：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: is a directory</source>
        <translation>無法開啟 %1：是一個目錄</translation>
    </message>
    <message>
        <source>Logging in to %1 failed: authentication required</source>
        <translation>登入 %1 失敗：需要認證</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessHttpBackend</name>
    <message>
        <source>No suitable proxy found</source>
        <translation>找不到合適的代理伺服器</translation>
    </message>
</context>
<context>
    <name>QCheckBox</name>
    <message>
        <source>Check</source>
        <translation>勾選</translation>
    </message>
    <message>
        <source>Toggle</source>
        <translation>切換</translation>
    </message>
    <message>
        <source>Uncheck</source>
        <translation>取消勾選</translation>
    </message>
</context>
<context>
    <name>QRadioButton</name>
    <message>
        <source>Check</source>
        <translation>勾選</translation>
    </message>
</context>
<context>
    <name>Q3TitleBar</name>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Minimize</source>
        <translation>最小化</translation>
    </message>
    <message>
        <source>Puts a minimized back to normal</source>
        <translation>將最小化視窗放回原大小</translation>
    </message>
    <message>
        <source>Displays the name of the window and contains controls to manipulate it</source>
        <translation>顯示視窗名稱，並包含操作它的控制元件</translation>
    </message>
    <message>
        <source>Makes the window full screen</source>
        <translation>將視窗放大到全畫面</translation>
    </message>
    <message>
        <source>System</source>
        <translation>系統</translation>
    </message>
    <message>
        <source>Maximize</source>
        <translation>最大化</translation>
    </message>
    <message>
        <source>Contains commands to manipulate the window</source>
        <translation>包含要操作此視窗的指令</translation>
    </message>
    <message>
        <source>Restore up</source>
        <translation>向上恢復</translation>
    </message>
    <message>
        <source>Closes the window</source>
        <translation>關閉視窗</translation>
    </message>
    <message>
        <source>Puts a maximized window back to normal</source>
        <translation>將最大化視窗放回原大小</translation>
    </message>
    <message>
        <source>Moves the window out of the way</source>
        <translation>把視窗移開</translation>
    </message>
    <message>
        <source>Restore down</source>
        <translation>向下恢復</translation>
    </message>
</context>
<context>
    <name>Phonon::</name>
    <message>
        <source>Games</source>
        <translation>遊戲</translation>
    </message>
    <message>
        <source>Music</source>
        <translation>音樂</translation>
    </message>
    <message>
        <source>Video</source>
        <translation>影像</translation>
    </message>
    <message>
        <source>Communication</source>
        <translation>通訊</translation>
    </message>
    <message>
        <source>Accessibility</source>
        <translation>輔助裝置</translation>
    </message>
    <message>
        <source>Notifications</source>
        <translation>通知</translation>
    </message>
</context>
<context>
    <name>VolumeSlider</name>
    <message>
        <source>Muted</source>
        <translation>靜音</translation>
    </message>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
</context>
<context>
    <name>Q3LocalFs</name>
    <message>
        <source>Could not open
%1</source>
        <translation>無法開啟
%1</translation>
    </message>
    <message>
        <source>Could not remove file or directory
%1</source>
        <translation>無法移除目錄
%1</translation>
    </message>
    <message>
        <source>Could not create directory
%1</source>
        <translation>無法建立目錄
%1</translation>
    </message>
    <message>
        <source>Could not read directory
%1</source>
        <translation>無法讀取目錄
%1</translation>
    </message>
    <message>
        <source>Could not rename
%1
to
%2</source>
        <translation>無法將
%1
重新命名為
%2</translation>
    </message>
    <message>
        <source>Could not write
%1</source>
        <translation>無法寫入
%1</translation>
    </message>
</context>
<context>
    <name>QDial</name>
    <message>
        <source>QDial</source>
        <translation>QDial</translation>
    </message>
    <message>
        <source>SliderHandle</source>
        <translation>SliderHandle</translation>
    </message>
    <message>
        <source>SpeedoMeter</source>
        <translation>SpeedoMeter</translation>
    </message>
</context>
<context>
    <name>QSocks5SocketEngine</name>
    <message>
        <source>Network operation timed out</source>
        <translation>網路操作逾時</translation>
    </message>
    <message>
        <source>Connection to proxy closed prematurely</source>
        <translation>代理伺服器連線已不正常關閉</translation>
    </message>
    <message>
        <source>Proxy authentication failed: %1</source>
        <translation>代理伺服器認證失敗：%1</translation>
    </message>
    <message>
        <source>Proxy authentication failed</source>
        <translation>代理伺服器認證失敗</translation>
    </message>
    <message>
        <source>General SOCKSv5 server failure</source>
        <translation>一般的 SOCKSv5 伺服器錯誤</translation>
    </message>
    <message>
        <source>Unknown SOCKSv5 proxy error code 0x%1</source>
        <translation>未知的 SOCKSv5 代理伺服器錯誤代碼 0x%1</translation>
    </message>
    <message>
        <source>Connection not allowed by SOCKSv5 server</source>
        <translation>連線未被 SOCKSv5 伺服器允許</translation>
    </message>
    <message>
        <source>SOCKSv5 command not supported</source>
        <translation>SOCKSv5 指令未被支援</translation>
    </message>
    <message>
        <source>Connection to proxy timed out</source>
        <translation>代理伺服器連線逾時</translation>
    </message>
    <message>
        <source>Proxy host not found</source>
        <translation>找不到代理伺服器</translation>
    </message>
    <message>
        <source>TTL expired</source>
        <translation>TTL 逾時</translation>
    </message>
    <message>
        <source>Address type not supported</source>
        <translation>位址型態未被支援</translation>
    </message>
    <message>
        <source>Connection to proxy refused</source>
        <translation>代理伺服器連線被拒</translation>
    </message>
    <message>
        <source>SOCKS version 5 protocol error</source>
        <translation>SOCKS 5 的協定錯誤</translation>
    </message>
</context>
<context>
    <name>QWhatsThisAction</name>
    <message>
        <source>What&apos;s This?</source>
        <translation>這是什麼？</translation>
    </message>
</context>
<context>
    <name>Q3UrlOperator</name>
    <message>
        <source>The protocol `%1&apos; does not support getting files</source>
        <translation>協定 %1 未支援取得檔案</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support renaming files or directories</source>
        <translation>協定 %1 未支援重新命名檔案或目錄</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support listing directories</source>
        <translation>協定 %1 未支援列出目錄</translation>
    </message>
    <message>
        <source>(unknown)</source>
        <translation>（未知）</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support removing files or directories</source>
        <translation>協定 %1 未支援移除檔案或目錄</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support putting files</source>
        <translation>協定 %1 未支援寫入檔案</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; is not supported</source>
        <translation>協定 %1 未支援</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support copying or moving files or directories</source>
        <translation>協定 %1 未支援複製或移動檔案或目錄</translation>
    </message>
    <message>
        <source>The protocol `%1&apos; does not support creating new directories</source>
        <translation>協定 %1 未支援建立新目錄</translation>
    </message>
</context>
<context>
    <name>QFtp</name>
    <message>
        <source>Listing directory failed:
%1</source>
        <translation>列出目錄時失敗：
%1</translation>
    </message>
    <message>
        <source>Creating directory failed:
%1</source>
        <translation>建立目錄時失敗：
%1</translation>
    </message>
    <message>
        <source>Not connected</source>
        <translation>未連線</translation>
    </message>
    <message>
        <source>Connection refused for data connection</source>
        <translation>資料連線被拒</translation>
    </message>
    <message>
        <source>Login failed:
%1</source>
        <translation>登入失敗：
%1</translation>
    </message>
    <message>
        <source>Downloading file failed:
%1</source>
        <translation>下載檔案時失敗：
%1</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>已連線到主機</translation>
    </message>
    <message>
        <source>Connection timed out to host %1</source>
        <translation>連線到主機 %1 逾時</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>已連接到主機 %1</translation>
    </message>
    <message>
        <source>Connecting to host failed:
%1</source>
        <translation>連線到主機失敗：
%1</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>找不到主機 %1</translation>
    </message>
    <message>
        <source>Uploading file failed:
%1</source>
        <translation>上傳檔案時失敗：
%1</translation>
    </message>
    <message>
        <source>Changing directory failed:
%1</source>
        <translation>變更目錄時失敗：
%1</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>找到主機</translation>
    </message>
    <message>
        <source>Removing directory failed:
%1</source>
        <translation>移除目錄時失敗：
%1</translation>
    </message>
    <message>
        <source>Connection refused to host %1</source>
        <translation>連線到主機 %1 被拒</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到 %1 的連線已關閉</translation>
    </message>
    <message>
        <source>Removing file failed:
%1</source>
        <translation>移除檔案時失敗：
%1</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>找到主機 %1</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>連線已關閉</translation>
    </message>
</context>
<context>
    <name>QDB2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to set autocommit</source>
        <translation>無法設定自動提交</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>無法連接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
</context>
<context>
    <name>QIBaseDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>無法開始事務</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>開啟資料庫發生錯誤</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
</context>
<context>
    <name>QIBaseResult</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to open BLOB</source>
        <translation>無法開啟 BLOB</translation>
    </message>
    <message>
        <source>Could not describe statement</source>
        <translation>無法描述敘述</translation>
    </message>
    <message>
        <source>Could not describe input statement</source>
        <translation>無法描述輸入敘述</translation>
    </message>
    <message>
        <source>Could not allocate statement</source>
        <translation>無法配置敘述</translation>
    </message>
    <message>
        <source>Unable to write BLOB</source>
        <translation>無法寫入 BLOB</translation>
    </message>
    <message>
        <source>Could not start transaction</source>
        <translation>無法開始事務</translation>
    </message>
    <message>
        <source>Unable to close statement</source>
        <translation>無法關閉敘述</translation>
    </message>
    <message>
        <source>Could not get query info</source>
        <translation>無法取得查詢資訊</translation>
    </message>
    <message>
        <source>Could not find array</source>
        <translation>找不到陣列</translation>
    </message>
    <message>
        <source>Could not get array data</source>
        <translation>無法取得陣列資料</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>無法執行查詢</translation>
    </message>
    <message>
        <source>Could not prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Could not fetch next item</source>
        <translation>無法抓取下一個項目</translation>
    </message>
    <message>
        <source>Could not get statement info</source>
        <translation>無法取得敘述資訊</translation>
    </message>
    <message>
        <source>Unable to create BLOB</source>
        <translation>無法建立 BLOB</translation>
    </message>
    <message>
        <source>Unable to read BLOB</source>
        <translation>無法讀取 BLOB</translation>
    </message>
</context>
<context>
    <name>QMYSQLDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to open database &apos;</source>
        <translation>無法開啟資料庫</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>無法連線</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>無法開始事務</translation>
    </message>
</context>
<context>
    <name>QOCIDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to initialize</source>
        <translation>無法初始化</translation>
    </message>
    <message>
        <source>Unable to logon</source>
        <translation>無法登入</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>無法開始事務</translation>
    </message>
</context>
<context>
    <name>QODBCDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to enable autocommit</source>
        <translation>無法開啟自動提交功能</translation>
    </message>
    <message>
        <source>Unable to connect - Driver doesn&apos;t support all needed functionality</source>
        <translation>無法連接─驅動程式無法支援所有需要的功能</translation>
    </message>
    <message>
        <source>Unable to disable autocommit</source>
        <translation>無法關閉自動提交功能</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>無法連接</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
</context>
<context>
    <name>QSQLite2Driver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Error to open database</source>
        <translation>開啟資料庫時發生錯誤</translation>
    </message>
    <message>
        <source>Unable to rollback Transaction</source>
        <translation>無法反轉事務</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>無法開始事務</translation>
    </message>
</context>
<context>
    <name>QSQLiteDriver</name>
    <message>
        <source>Unable to commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Error closing database</source>
        <translation>關閉資料庫發生錯誤</translation>
    </message>
    <message>
        <source>Error opening database</source>
        <translation>開啟資料庫發生錯誤</translation>
    </message>
    <message>
        <source>Unable to rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
    <message>
        <source>Unable to begin transaction</source>
        <translation>無法開始事務</translation>
    </message>
</context>
<context>
    <name>QAbstractSocket</name>
    <message>
        <source>Host not found</source>
        <translation>找不到主機</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>連線被拒</translation>
    </message>
    <message>
        <source>Connection timed out</source>
        <translation>連線逾時</translation>
    </message>
    <message>
        <source>Socket is not connected</source>
        <translation>Socket 未連線</translation>
    </message>
    <message>
        <source>Socket operation timed out</source>
        <translation>Socket 操作逾時</translation>
    </message>
    <message>
        <source>Network unreachable</source>
        <translation>無法使用網路</translation>
    </message>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>Socket 的操作未被支援</translation>
    </message>
</context>
<context>
    <name>QHostInfoAgent</name>
    <message>
        <source>Host not found</source>
        <translation>找不到主機</translation>
    </message>
    <message>
        <source>Unknown address type</source>
        <translation>未知的位址型態</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::MediaObject</name>
    <message>
        <source>Could not open media source.</source>
        <translation>無法開啟媒體來源。</translation>
    </message>
    <message>
        <source>Could not decode media source.</source>
        <translation>無法解碼媒體來源。</translation>
    </message>
    <message>
        <source>Invalid source type.</source>
        <translation>不合法的來源型態。</translation>
    </message>
    <message>
        <source>Cannot start playback.

Check your Gstreamer installation and make sure you
have libgstreamer-plugins-base installed.</source>
        <translation>無法開始播放。

請檢查您的 Gstreamer 安裝，並確定您有安裝
libgstreamer-plugins-base 套件。</translation>
    </message>
    <message>
        <source>Could not open audio device. The device is already in use.</source>
        <translation>無法開啟音效裝置。裝置已在使用中。</translation>
    </message>
    <message>
        <source>A required codec is missing. You need to install the following codec(s) to play this content: %0</source>
        <translation>找不到需要的編解碼器。您需要安裝以下的套件來播放此內容：%0</translation>
    </message>
    <message>
        <source>Could not locate media source.</source>
        <translation>無法定位媒體來源。</translation>
    </message>
</context>
<context>
    <name>QLibrary</name>
    <message>
        <source>Could not unmap &apos;%1&apos;: %2</source>
        <translation>無法 unmap &apos;%1&apos;：%2</translation>
    </message>
    <message>
        <source>Cannot unload library %1: %2</source>
        <translation>無法卸載函式庫 %1：%2</translation>
    </message>
    <message>
        <source>Cannot load library %1: %2</source>
        <translation>無法載入函式庫 %1：%2</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (%2.%3.%4) [%5]</source>
        <translation>外掛程式 %1 使用不相容的 Qt 函式庫（%2.%3.%4）【%5】</translation>
    </message>
    <message>
        <source>Cannot resolve symbol &quot;%1&quot; in %2: %3</source>
        <translation>無法反解 %2 內的符號 %1：%3</translation>
    </message>
    <message>
        <source>Plugin verification data mismatch in &apos;%1&apos;</source>
        <translation>在 %1 中的外掛程式確認資料不符合</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. (Cannot mix debug and release libraries.)</source>
        <translation>外掛程式 %1 使用不相容的 Qt 函式庫。（不能將除錯與釋出版的函式庫混在一起。）</translation>
    </message>
    <message>
        <source>The file &apos;%1&apos; is not a valid Qt plugin.</source>
        <translation>檔案 %1 不是合法的 Qt 外掛程式。</translation>
    </message>
    <message>
        <source>The shared library was not found.</source>
        <translation>找不到分享函式庫。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
    <message>
        <source>The plugin &apos;%1&apos; uses incompatible Qt library. Expected build key &quot;%2&quot;, got &quot;%3&quot;</source>
        <translation>外掛程式 %1 使用不相容的 Qt 函式庫。預期建構鑰 %2，卻得到 %3</translation>
    </message>
    <message>
        <source>Could not mmap &apos;%1&apos;: %2</source>
        <translation>無法 mmap &apos;%1&apos;：%2</translation>
    </message>
</context>
<context>
    <name>QHttp</name>
    <message>
        <source>Connection refused (or timed out)</source>
        <translation>連線被拒（或連線逾時）</translation>
    </message>
    <message>
        <source>Data corrupted</source>
        <translation>資料已損毀</translation>
    </message>
    <message>
        <source>Connected to host</source>
        <translation>已連線到主機</translation>
    </message>
    <message>
        <source>Connected to host %1</source>
        <translation>已連接到主機 %1</translation>
    </message>
    <message>
        <source>Host %1 not found</source>
        <translation>找不到主機 %1</translation>
    </message>
    <message>
        <source>Host requires authentication</source>
        <translation>主機需要認證</translation>
    </message>
    <message>
        <source>Error writing response to device</source>
        <translation>寫入回應到裝置時發生錯誤</translation>
    </message>
    <message>
        <source>HTTPS connection requested but SSL support not compiled in</source>
        <translation>HTTPS 連線需要的 SSL 支援並未編譯進來</translation>
    </message>
    <message>
        <source>Host found</source>
        <translation>找到主機</translation>
    </message>
    <message>
        <source>Connection refused</source>
        <translation>連線被拒</translation>
    </message>
    <message>
        <source>Proxy authentication required</source>
        <translation>代理伺服器需要認證</translation>
    </message>
    <message>
        <source>Unknown protocol specified</source>
        <translation>指定了未知的協定</translation>
    </message>
    <message>
        <source>HTTP request failed</source>
        <translation>HTTP 要求失敗</translation>
    </message>
    <message>
        <source>Proxy requires authentication</source>
        <translation>代理伺服器需要認證</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要認證</translation>
    </message>
    <message>
        <source>SSL handshake failed</source>
        <translation>SSL 溝通失敗</translation>
    </message>
    <message>
        <source>Connection to %1 closed</source>
        <translation>到 %1 的連線已關閉</translation>
    </message>
    <message>
        <source>Invalid HTTP chunked body</source>
        <translation>不合法的 HTTP 區塊主體</translation>
    </message>
    <message>
        <source>Host %1 found</source>
        <translation>找到主機 %1</translation>
    </message>
    <message>
        <source>Wrong content length</source>
        <translation>錯誤的內容長度</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
    <message>
        <source>Invalid HTTP response header</source>
        <translation>不合法的 HTTP 回覆標頭</translation>
    </message>
    <message>
        <source>Connection closed</source>
        <translation>連線已關閉</translation>
    </message>
    <message>
        <source>No server set to connect to</source>
        <translation>沒有設定要連線到哪個伺服器</translation>
    </message>
    <message>
        <source>Server closed connection unexpectedly</source>
        <translation>伺服器無預警關閉連線</translation>
    </message>
    <message>
        <source>Request aborted</source>
        <translation>要求中止</translation>
    </message>
</context>
<context>
    <name>QXml</name>
    <message>
        <source>unparsed entity reference in wrong context</source>
        <translation>在錯誤的內文中有未剖析的實體參考</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in DTD</source>
        <translation>在 DTD 中不允許使用外部剖析的實體參考</translation>
    </message>
    <message>
        <source>wrong value for standalone declaration</source>
        <translation>獨立宣告時的值錯誤</translation>
    </message>
    <message>
        <source>encoding declaration or standalone declaration expected while reading the XML declaration</source>
        <translation>讀取 XML 宣告時應有編碼宣告或獨立宣告</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>沒有發生錯誤</translation>
    </message>
    <message>
        <source>error occurred while parsing reference</source>
        <translation>剖析參考時發生錯誤</translation>
    </message>
    <message>
        <source>standalone declaration expected while reading the XML declaration</source>
        <translation>讀取 XML 宣告時應有讀立宣告</translation>
    </message>
    <message>
        <source>invalid name for processing instruction</source>
        <translation>處理指令時的不合法名稱</translation>
    </message>
    <message>
        <source>error triggered by consumer</source>
        <translation>用戶觸發的錯誤</translation>
    </message>
    <message>
        <source>error occurred while parsing element</source>
        <translation>剖析元素時發生錯誤</translation>
    </message>
    <message>
        <source>unexpected character</source>
        <translation>非預期的字元</translation>
    </message>
    <message>
        <source>tag mismatch</source>
        <translation>標籤不對稱</translation>
    </message>
    <message>
        <source>error occurred while parsing content</source>
        <translation>剖析內容時發生錯誤</translation>
    </message>
    <message>
        <source>error occurred while parsing comment</source>
        <translation>剖析註解時發生錯誤</translation>
    </message>
    <message>
        <source>internal general entity reference not allowed in DTD</source>
        <translation>在 DTD 中不允許內部產生的實體參考</translation>
    </message>
    <message>
        <source>recursive entities</source>
        <translation>遞迴的實體</translation>
    </message>
    <message>
        <source>more than one document type definition</source>
        <translation>定義了一個以上的文件型態</translation>
    </message>
    <message>
        <source>version expected while reading the XML declaration</source>
        <translation>讀取 XML 宣告時應有版本號</translation>
    </message>
    <message>
        <source>letter is expected</source>
        <translation>預期應為字母</translation>
    </message>
    <message>
        <source>unexpected end of file</source>
        <translation>未預期遇到檔案結尾</translation>
    </message>
    <message>
        <source>external parsed general entity reference not allowed in attribute value</source>
        <translation>在屬性值中不允許使用外部剖析的實體參考</translation>
    </message>
    <message>
        <source>error in the text declaration of an external entity</source>
        <translation>在外部實體中的文字宣告有錯誤</translation>
    </message>
    <message>
        <source>error occurred while parsing document type definition</source>
        <translation>剖析文件型態定義時發生錯誤</translation>
    </message>
</context>
<context>
    <name>QSystemSemaphore</name>
    <message>
        <source>%1: does not exist</source>
        <translation>%1：不存在</translation>
    </message>
    <message>
        <source>%1: already exists</source>
        <translation>%1：已存在</translation>
    </message>
    <message>
        <source>%1: unknown error %2</source>
        <translation>%1：未知的錯誤 %2</translation>
    </message>
    <message>
        <source>%1: permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: out of resources</source>
        <translation>%1：資源不足</translation>
    </message>
</context>
<context>
    <name>QSQLiteResult</name>
    <message>
        <source>Unable to fetch row</source>
        <translation>無法抓取列</translation>
    </message>
    <message>
        <source>No query</source>
        <translation>沒有查詢</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to bind parameters</source>
        <translation>無法結合參數</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>無法重置敘述</translation>
    </message>
    <message>
        <source>Parameter count mismatch</source>
        <translation>參數數量不符合</translation>
    </message>
</context>
<context>
    <name>QApplication</name>
    <message>
        <source>Activates the program&apos;s main window</source>
        <translation>啟動程式的主視窗</translation>
    </message>
    <message>
        <source>Activate</source>
        <translation>啟動</translation>
    </message>
    <message>
        <source>Executable &apos;%1&apos; requires Qt %2, found Qt %3.</source>
        <translation>執行檔 %1 需要 Qt %2，但只找到 Qt %3。</translation>
    </message>
    <message>
        <source>Incompatible Qt Library Error</source>
        <translation>Qt 函式庫不相容的錯誤</translation>
    </message>
</context>
<context>
    <name>QUnicodeControlCharacterMenu</name>
    <message>
        <source>RLE Start of right-to-left embedding</source>
        <translation>RLE 右到左嵌入起點</translation>
    </message>
    <message>
        <source>ZWSP Zero width space</source>
        <translation>ZWSP 零寬度空白</translation>
    </message>
    <message>
        <source>Insert Unicode control character</source>
        <translation>插入萬國碼控制字元</translation>
    </message>
    <message>
        <source>LRO Start of left-to-right override</source>
        <translation>LRO 左到右覆寫起點</translation>
    </message>
    <message>
        <source>LRE Start of left-to-right embedding</source>
        <translation>LRE 左到右嵌入起點</translation>
    </message>
    <message>
        <source>RLM Right-to-left mark</source>
        <translation>RLM 右到左標記</translation>
    </message>
    <message>
        <source>PDF Pop directional formatting</source>
        <translation>PDF 彈出方向格式</translation>
    </message>
    <message>
        <source>ZWNJ Zero width non-joiner</source>
        <translation>ZWNJ 零寬度非連接器</translation>
    </message>
    <message>
        <source>RLO Start of right-to-left override</source>
        <translation>RLO 右到左覆寫起點</translation>
    </message>
    <message>
        <source>ZWJ Zero width joiner</source>
        <translation>ZWJ 零寬度連接器</translation>
    </message>
    <message>
        <source>LRM Left-to-right mark</source>
        <translation>LRM 左到右標記</translation>
    </message>
</context>
<context>
    <name>QWebFrame</name>
    <message>
        <source>Request blocked</source>
        <translation>請求已被阻擋</translation>
    </message>
    <message>
        <source>Request cancelled</source>
        <translation>請求已取消</translation>
    </message>
    <message>
        <source>Cannot show URL</source>
        <translation>無法顯示網址</translation>
    </message>
    <message>
        <source>Frame load interruped by policy change</source>
        <translation>影像載入因政策變更而中斷</translation>
    </message>
    <message>
        <source>File does not exist</source>
        <translation>檔案不存在</translation>
    </message>
    <message>
        <source>Cannot show mimetype</source>
        <translation>無法顯示 MIME 型態</translation>
    </message>
</context>
<context>
    <name>QRegExp</name>
    <message>
        <source>bad lookahead syntax</source>
        <translation>錯誤的 lookahead 語法</translation>
    </message>
    <message>
        <source>no error occurred</source>
        <translation>沒有發生錯誤</translation>
    </message>
    <message>
        <source>missing left delim</source>
        <translation>少了左方的區隔符</translation>
    </message>
    <message>
        <source>bad char class syntax</source>
        <translation>錯誤的字元類別語法</translation>
    </message>
    <message>
        <source>disabled feature used</source>
        <translation>使用已關閉的功能</translation>
    </message>
    <message>
        <source>invalid octal value</source>
        <translation>不合法的八進位值</translation>
    </message>
    <message>
        <source>bad repetition syntax</source>
        <translation>錯誤的重覆語法</translation>
    </message>
    <message>
        <source>met internal limit</source>
        <translation>遇到內部限制</translation>
    </message>
    <message>
        <source>unexpected end</source>
        <translation>未預期遇到結尾</translation>
    </message>
</context>
<context>
    <name>QHttpSocketEngine</name>
    <message>
        <source>Proxy connection refused</source>
        <translation>代理伺服器連線被拒</translation>
    </message>
    <message>
        <source>Proxy denied connection</source>
        <translation>代理伺服器拒絕連線</translation>
    </message>
    <message>
        <source>Proxy server not found</source>
        <translation>找不到代理伺服器</translation>
    </message>
    <message>
        <source>Proxy server connection timed out</source>
        <translation>代理伺服器連線逾時</translation>
    </message>
    <message>
        <source>Did not receive HTTP response from proxy</source>
        <translation>未從代理伺服器接收到 HTTP 回應</translation>
    </message>
    <message>
        <source>Proxy connection closed prematurely</source>
        <translation>代理伺服器連線已不正常關閉</translation>
    </message>
    <message>
        <source>Error communicating with HTTP proxy</source>
        <translation>與 HTTP 代理伺服器聯繫時發生錯誤</translation>
    </message>
    <message>
        <source>Authentication required</source>
        <translation>需要認證</translation>
    </message>
    <message>
        <source>Error parsing authentication request from proxy</source>
        <translation>剖析從代理伺服器傳來的認證要求時發生錯誤</translation>
    </message>
</context>
<context>
    <name>QOCIResult</name>
    <message>
        <source>Unable to alloc statement</source>
        <translation>無法配置敘述</translation>
    </message>
    <message>
        <source>Unable to goto next</source>
        <translation>無法跳到下一個</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to bind column for batch execute</source>
        <translation>無法結合欄位以做批次執行</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Unable to execute batch statement</source>
        <translation>無法執行批次敘述</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>無法結合數值</translation>
    </message>
</context>
<context>
    <name>QNetworkReply</name>
    <message>
        <source>Error downloading %1 - server replied: %2</source>
        <translation>下載 %1 時發生錯誤─伺服器回應：%2</translation>
    </message>
    <message>
        <source>Protocol &quot;%1&quot; is unknown</source>
        <translation>未知的協定 %1</translation>
    </message>
</context>
<context>
    <name>QAbstractSpinBox</name>
    <message>
        <source>Step &amp;down</source>
        <translation>單步向下(&amp;D)</translation>
    </message>
    <message>
        <source>&amp;Step up</source>
        <translation>單步向上(&amp;S)</translation>
    </message>
    <message>
        <source>&amp;Select All</source>
        <translation>全部選擇(&amp;S)</translation>
    </message>
</context>
<context>
    <name>QDB2Result</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>無法結合變數</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>無法抓取下一筆</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Unable to fetch record %1</source>
        <translation>無法抓取紀錄 %1</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>無法抓取第一筆</translation>
    </message>
</context>
<context>
    <name>QODBCResult</name>
    <message>
        <source>Unable to bind variable</source>
        <translation>無法結合變數</translation>
    </message>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to fetch next</source>
        <translation>無法抓取下一筆</translation>
    </message>
    <message>
        <source>Unable to fetch last</source>
        <translation>無法抓取最後一筆</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Unable to fetch previous</source>
        <translation>無法抓取前一筆</translation>
    </message>
    <message>
        <source>Unable to fetch</source>
        <translation>無法抓取</translation>
    </message>
    <message>
        <source>QODBCResult::reset: Unable to set &apos;SQL_CURSOR_STATIC&apos; as statement attribute. Please check your ODBC driver configuration</source>
        <translation>QODBCResult::reset: 無法設定 SQL_CURSOR_STATIC 做為敘述屬性。請檢查您的 ODBC 驅動程式的設定</translation>
    </message>
    <message>
        <source>Unable to fetch first</source>
        <translation>無法抓取第一筆</translation>
    </message>
</context>
<context>
    <name>QPSQLDriver</name>
    <message>
        <source>Unable to subscribe</source>
        <translation>無法訂閱</translation>
    </message>
    <message>
        <source>Could not begin transaction</source>
        <translation>無法開始事務</translation>
    </message>
    <message>
        <source>Could not rollback transaction</source>
        <translation>無法反轉事務</translation>
    </message>
    <message>
        <source>Could not commit transaction</source>
        <translation>無法提交事務</translation>
    </message>
    <message>
        <source>Unable to connect</source>
        <translation>無法連線</translation>
    </message>
    <message>
        <source>Unable to unsubscribe</source>
        <translation>無法取消訂閱</translation>
    </message>
</context>
<context>
    <name>QInputDialog</name>
    <message>
        <source>Enter a value:</source>
        <translation>請輸入值：</translation>
    </message>
</context>
<context>
    <name>QCoreApplication</name>
    <message>
        <source>%1: key is empty</source>
        <translation>%1：鍵值是空的</translation>
    </message>
    <message>
        <source>%1: unable to make key</source>
        <translation>%1：無法產生鍵值</translation>
    </message>
    <message>
        <source>%1: ftok failed</source>
        <translation>%1：ftok 失敗</translation>
    </message>
</context>
<context>
    <name>QIODevice</name>
    <message>
        <source>No such file or directory</source>
        <translation>找不到該檔案或目錄</translation>
    </message>
    <message>
        <source>Permission denied</source>
        <translation>權限不足</translation>
    </message>
    <message>
        <source>No space left on device</source>
        <translation>裝置上已無空間</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
    <message>
        <source>Too many open files</source>
        <translation>開啟過多檔案</translation>
    </message>
</context>
<context>
    <name>QMultiInputContext</name>
    <message>
        <source>Select IM</source>
        <translation>選擇輸入法</translation>
    </message>
</context>
<context>
    <name>QTabBar</name>
    <message>
        <source>Scroll Left</source>
        <translation>往左捲軸</translation>
    </message>
    <message>
        <source>Scroll Right</source>
        <translation>往右捲軸</translation>
    </message>
</context>
<context>
    <name>QUndoModel</name>
    <message>
        <source>&lt;empty&gt;</source>
        <translation>＜空白＞</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessCacheBackend</name>
    <message>
        <source>Error opening %1</source>
        <translation>開啟 %1 發生錯誤</translation>
    </message>
</context>
<context>
    <name>QMYSQLResult</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to store statement results</source>
        <translation>無法儲存敘述結果</translation>
    </message>
    <message>
        <source>Unable to execute next query</source>
        <translation>無法執行下一個查詢</translation>
    </message>
    <message>
        <source>Unable to bind outvalues</source>
        <translation>無法結合輸出值</translation>
    </message>
    <message>
        <source>Unable to store next result</source>
        <translation>無法儲存下一個結果</translation>
    </message>
    <message>
        <source>Unable to fetch data</source>
        <translation>無法抓取資料</translation>
    </message>
    <message>
        <source>Unable to prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Unable to store result</source>
        <translation>無法儲存結果</translation>
    </message>
    <message>
        <source>Unable to bind value</source>
        <translation>無法結合數值</translation>
    </message>
    <message>
        <source>Unable to execute query</source>
        <translation>無法執行查詢</translation>
    </message>
    <message>
        <source>Unable to reset statement</source>
        <translation>無法重置敘述</translation>
    </message>
</context>
<context>
    <name>QSQLite2Result</name>
    <message>
        <source>Unable to execute statement</source>
        <translation>無法執行敘述</translation>
    </message>
    <message>
        <source>Unable to fetch results</source>
        <translation>無法抓取結果</translation>
    </message>
</context>
<context>
    <name>Q3MainWindow</name>
    <message>
        <source>Line up</source>
        <translation>排列</translation>
    </message>
    <message>
        <source>Customize...</source>
        <translation>自訂...</translation>
    </message>
</context>
<context>
    <name>QUdpSocket</name>
    <message>
        <source>This platform does not support IPv6</source>
        <translation>此平台不支援 IPv6</translation>
    </message>
</context>
<context>
    <name>Phonon::Gstreamer::Backend</name>
    <message>
        <source>Warning: You do not seem to have the base GStreamer plugins installed.
          All audio and video support has been disabled</source>
        <translation>警告：您可能沒有安裝 GStreamer 外掛程式。
          所有音效與影像支援將被關閉。</translation>
    </message>
    <message>
        <source>Warning: You do not seem to have the package gstreamer0.10-plugins-good installed.
          Some video features have been disabled.</source>
        <translation>警告：您可能沒有安裝 gstreamer0.10-plugins-good。
          有些影像的功能將被關閉。</translation>
    </message>
</context>
<context>
    <name>QLocalServer</name>
    <message>
        <source>%1: Name error</source>
        <translation>%1：名稱錯誤</translation>
    </message>
    <message>
        <source>%1: Unknown error %2</source>
        <translation>%1：未知的錯誤 %2</translation>
    </message>
    <message>
        <source>%1: Permission denied</source>
        <translation>%1：存取被拒</translation>
    </message>
    <message>
        <source>%1: Address in use</source>
        <translation>%1：位址使用中</translation>
    </message>
</context>
<context>
    <name>Phonon::VolumeSlider</name>
    <message>
        <source>Volume: %1%</source>
        <translation>音量：%1%</translation>
    </message>
    <message>
        <source>Use this slider to adjust the volume. The leftmost position is 0%, the rightmost is %1%</source>
        <translation>使用此滑動器來調整音量。最左邊的位置為 0%，最右邊的為 %1%。</translation>
    </message>
</context>
<context>
    <name>Q3ToolBar</name>
    <message>
        <source>More...</source>
        <translation>更多...</translation>
    </message>
</context>
<context>
    <name>QMultiInputContextPlugin</name>
    <message>
        <source>Multiple input method switcher that uses the context menu of the text widgets</source>
        <translation>使用文字元件中的內文選單的多重輸入法切換器</translation>
    </message>
    <message>
        <source>Multiple input method switcher</source>
        <translation>多重輸入法切換器</translation>
    </message>
</context>
<context>
    <name>QGuiApplication</name>
    <message>
        <source>QT_LAYOUT_DIRECTION</source>
        <translation>LTR</translation>
    </message>
</context>
<context>
    <name>Q3ProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>QProgressDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>QFile</name>
    <message>
        <source>Cannot create %1 for output</source>
        <translation>無法建立 %1 以輸出</translation>
    </message>
    <message>
        <source>Failure to write block</source>
        <translation>寫入區塊時失敗</translation>
    </message>
    <message>
        <source>Cannot open %1 for input</source>
        <translation>無法開啟 %1 以輸入</translation>
    </message>
    <message>
        <source>Destination file exists</source>
        <translation>目標檔已存在</translation>
    </message>
    <message>
        <source>Cannot open for output</source>
        <translation>無法開啟 %1 以輸出</translation>
    </message>
</context>
<context>
    <name>MAC_APPLICATION_MENU</name>
    <message>
        <source>Hide Others</source>
        <translation>隱藏其他</translation>
    </message>
    <message>
        <source>Quit %1</source>
        <translation>結束 %1</translation>
    </message>
    <message>
        <source>About %1</source>
        <translation>關於 %1</translation>
    </message>
    <message>
        <source>Preferences...</source>
        <translation>偏好設定...</translation>
    </message>
    <message>
        <source>Services</source>
        <translation>服務</translation>
    </message>
    <message>
        <source>Hide %1</source>
        <translation>隱藏%1</translation>
    </message>
    <message>
        <source>Show All</source>
        <translation>顯示全部</translation>
    </message>
</context>
<context>
    <name>QTDSDriver</name>
    <message>
        <source>Unable to open connection</source>
        <translation>無法開啟連線</translation>
    </message>
    <message>
        <source>Unable to use database</source>
        <translation>無法使用資料庫</translation>
    </message>
</context>
<context>
    <name>AudioOutput</name>
    <message>
        <source>&lt;html&gt;The audio playback device &lt;b&gt;%1&lt;/b&gt; does not work.&lt;br/&gt;Falling back to &lt;b&gt;%2&lt;/b&gt;.&lt;/html&gt;</source>
        <translation>&lt;html&gt;音效播放裝置 &lt;b&gt;%1&lt;/b&gt; 未能運作。&lt;br/&gt;改用預設裝置 &lt;b&gt;%2&lt;/b&gt;。&lt;/html&gt;</translation>
    </message>
    <message>
        <source>Revert back to device &apos;%1&apos;</source>
        <translation>回復到裝置 %1</translation>
    </message>
    <message>
        <source>&lt;html&gt;Switching to the audio playback device &lt;b&gt;%1&lt;/b&gt;&lt;br/&gt;which just became available and has higher preference.&lt;/html&gt;</source>
        <translation>&lt;html&gt;音效播放裝置 &lt;b&gt;%1&lt;/b&gt; 已可使用，&lt;br/&gt;因為有較高優先權，因此將切換到該裝置。&lt;/html&gt;</translation>
    </message>
</context>
<context>
    <name>QPluginLoader</name>
    <message>
        <source>The plugin was not loaded.</source>
        <translation>外掛程式未載入。</translation>
    </message>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
</context>
<context>
    <name>QSlider</name>
    <message>
        <source>Page up</source>
        <translation>頁面上方</translation>
    </message>
    <message>
        <source>Position</source>
        <translation>位置</translation>
    </message>
    <message>
        <source>Page right</source>
        <translation>頁面右方</translation>
    </message>
    <message>
        <source>Page down</source>
        <translation>頁面下方</translation>
    </message>
    <message>
        <source>Page left</source>
        <translation>頁面左方</translation>
    </message>
</context>
<context>
    <name>CloseButton</name>
    <message>
        <source>Close Tab</source>
        <translation>關閉分頁</translation>
    </message>
</context>
<context>
    <name>QPSQLResult</name>
    <message>
        <source>Unable to prepare statement</source>
        <translation>無法準備敘述</translation>
    </message>
    <message>
        <source>Unable to create query</source>
        <translation>無法建立查詢</translation>
    </message>
</context>
<context>
    <name>QNetworkAccessFileBackend</name>
    <message>
        <source>Request for opening non-local file %1</source>
        <translation>要求開啟非本地端檔案 %1</translation>
    </message>
    <message>
        <source>Read error reading from %1: %2</source>
        <translation>從 %1 讀取錯誤：%2</translation>
    </message>
    <message>
        <source>Cannot open %1: Path is a directory</source>
        <translation>無法開啟 %1：此路徑是一個目錄</translation>
    </message>
    <message>
        <source>Error opening %1: %2</source>
        <translation>開啟 %1 發生錯誤：%2</translation>
    </message>
    <message>
        <source>Write error writing to %1: %2</source>
        <translation>寫入 %1 時發生錯誤：%2</translation>
    </message>
</context>
<context>
    <name>QNetworkReplyImpl</name>
    <message>
        <source>Operation canceled</source>
        <translation>取消操作</translation>
    </message>
</context>
<context>
    <name>Q3NetworkProtocol</name>
    <message>
        <source>Operation stopped by the user</source>
        <translation>使用者已中止操作</translation>
    </message>
</context>
<context>
    <name>QMdiArea</name>
    <message>
        <source>(Untitled)</source>
        <translation>（未命名）</translation>
    </message>
</context>
<context>
    <name>QHostInfo</name>
    <message>
        <source>Unknown error</source>
        <translation>未知的錯誤</translation>
    </message>
</context>
<context>
    <name>Q3Accel</name>
    <message>
        <source>%1, %2 not defined</source>
        <translation>%1，%2 未定義</translation>
    </message>
    <message>
        <source>Ambiguous %1 not handled</source>
        <translation>不明確的 %1 尚未處理</translation>
    </message>
</context>
<context>
    <name>QTcpServer</name>
    <message>
        <source>Operation on socket is not supported</source>
        <translation>Socket 的操作未被支援</translation>
    </message>
</context>
</TS>