platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[platformio]
default_envs = seedlabs_devkit
src_dir = firmware/src
lib_dir = firmware/lib
include_dir = firmware/include
test_dir = firmware/test
data_dir = firmware/data

[env:seedlabs_devkit]
build_flags = 
	${env.build_flags}
	-D SK_ALS=1
	-D SK_PROXIMITY=1
	
	-D PIN_SDA=39
	-D PIN_SCL=38
	-D SK_MQTT_BUFFER_SIZE=2048
	
	-D SK_DISPLAY_ROTATION=0
	
	-D PIN_LED_DATA=12
	-D NUM_LEDS=72
	
	-D PIN_UH=8
	-D PIN_UL=16
	-D PIN_VH=18
	-D PIN_VL=7
	-D PIN_WH=17
	-D PIN_WL=15
	-D PIN_MT_DATA=14
	-D PIN_MT_CSN=11

	-D TFT_RST=10
	
	-D PIN_STRAIN_DO=21
	-D PIN_STRAIN_SCK=1

    -D DO_AUTOMATIC_MOTOR_CALIBRATION=0

	


[env]
platform = espressif32@6.8.1
framework = arduino
board = esp32-s3-devkitc-1-n16r8v
board_build.partitions = ./firmware/partitions-16MB-custom.csv
board_build.filesystem = fatfs
upload_speed = 921600
monitor_speed = 115200
monitor_filters = esp32_exception_decoder
debug_speed = 1200
debug_tool = esp-builtin
lib_deps = 
	infineon/TLV493D-Magnetic-Sensor @ 1.0.3
	bakercp/PacketSerial @ 1.4.0
	nanopb/Nanopb @ 0.4.7
	fastled/FastLED @ 3.5.0
	bogde/HX711 @ 0.7.5
	adafruit/Adafruit VEML7700 Library @ 1.1.1
	askuric/Simple FOC@2.3.3
	adafruit/Adafruit_VL53L0X@^1.2.2
	knolleary/PubSubClient@^2.8
	ayushsharma82/ElegantOTA@^3.1.0
    lvgl/lvgl@^8.4.0
    lovyan03/LovyanGFX@^1.1.12
    https://github.com/carlhampuswall/logging#0.1.0
build_flags = 
    -D SK_WIFI=1
	-D SK_MQTT=1
	-D SK_DISPLAY=1
	-D SK_LEDS=1
	-D SK_STRAIN=1
	
	-D SENSOR_MT6701=1
	-D SK_INVERT_ROTATION=1
	-D MOTOR_WANZHIDA_ONCE_TOP=1
	-D PIN_MT_CLOCK=13
	
	-D ELEGANTOTA_USE_ASYNC_WEBSERVER=0
	
	-D SK_UI_BOOT_MODE=0
	-D MONITOR_SPEED=115200
	-D SK_FORCE_UART_STREAM=0
	
	-D CONFIG_AUTOSTART_ARDUINO=1
	
	-D PIN_LCD_BACKLIGHT=5
	-D TFT_MISO=-1
	-D TFT_MOSI=3
	-D TFT_SCLK=4
	-D TFT_CS=9
	-D TFT_DC=2
	-D TFT_BL=-1
	-D TFT_WIDTH=240
	-D TFT_HEIGHT=240
	-D USER_SETUP_LOADED=1
	-D GC9A01_DRIVER=1
	-D CGRAM_OFFSET=1
	-D LOAD_GFXFF=1
	-D SPI_FREQUENCY=70000000
    -D SPI_READ_FREQUENCY=70000000
	-D SK_BACKLIGHT_BIT_DEPTH=12
	
	-D MQTT_MAX_PACKET_SIZE=256
	
	-D CORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_NONE

    ; Not certain why these were here please double check if they are needed, does compile and flash without them
	; -D FASTLED_UNUSABLE_PIN_MASK=0x100740LL
	; -D SOC_GPIO_VALID_GPIO_MASK=0xFF0EFFFFFF
	; -D SOC_GPIO_VALID_OUTPUT_GPIO_MASK=0x30EFFFFFF
	
	-D SK_ELEGANTOTA_PRO=0
	
	
	-D SOFT_RESET_SECONDS=5
	-D HARD_RESET_SECONDS=15
	
    -D RELEASE_VERSION='"DEV"'
	
	-D CALIBRATION_WEIGHT=272
	-D PRESS_WEIGHT=250

    ; Needed for DMA
    ; -D ESP32_DMA=1 ; already defined in tft_espi add back when remiving tft_espi
    -D USE_HSPI_PORT=1

    ; LVGL
    -I ./firmware/src/display
    -D LV_CONF_INCLUDE_SIMPLE=1
    -D LV_LVGL_H_INCLUDE_SIMPLE=1

    -D CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y

    ; KNOB ENGAGED TIMEOUT MILISECONDS
    -D KNOB_ENGAGED_TIMEOUT_NONE_PHYSICAL=8000
    -D KNOB_ENGAGED_TIMEOUT_PHYSICAL=30000

    -D MODEL='"SmartKnob DevKit v0.1"'

    -D ENABLE_LOGGING=1
    -D LOGGING_CUSTOM_INIT_TITLE=MODEL
    -D LOGGING_DELAY=1000


[env:seedlabs_devkit_inverted_display]
build_flags = 
	${env:seedlabs_devkit.build_flags}
	-D SK_ALS=0

[env:seedlabs_devkit_github_action_release]
build_flags = 
	${env:seedlabs_devkit.build_flags}
	-D SK_ELEGANTOTA_PRO=1
    -D DO_AUTOMATIC_MOTOR_CALIBRATION=1
	
	!echo '-D RELEASE_VERSION=\\"'$RELEASE_VERSION'\\"'
	!echo '-D COMMIT_HASH=\\"'$COMMIT_HASH'\\"'
	!echo '-D BUILD_TIMESTAMP=\\"'$BUILD_TIMESTAMP'\\"'
lib_deps = 
	git@github.com:SeedLabs-it/skdk-ota-pro.git
	infineon/TLV493D-Magnetic-Sensor @ 1.0.3
	bakercp/PacketSerial @ 1.4.0
	nanopb/Nanopb @ 0.4.7
	fastled/FastLED @ 3.5.0
	bogde/HX711 @ 0.7.5
	adafruit/Adafruit VEML7700 Library @ 1.1.1
	askuric/Simple FOC@2.3.3
	adafruit/Adafruit_VL53L0X@^1.2.2
	knolleary/PubSubClient@^2.8
    lvgl/lvgl@^8.4.0
    lovyan03/LovyanGFX@^1.1.12
    https://github.com/carlhampuswall/logging#0.1.0

[env:seedlabs_legacy]
build_flags = 
	${env.build_flags}
	-D SK_ALS=0
	-D SK_PROXIMITY=0

	-D SK_DISPLAY_ROTATION=0
	-D NUM_LEDS=8
	
	-D PIN_STRAIN_DO=38
	-D PIN_UH=20
	-D PIN_UL=19
	-D PIN_VH=21
	-D PIN_VL=17
	-D PIN_WH=12
	-D PIN_WL=18
	-D PIN_LED_DATA=7
	-D PIN_SDA=15
	-D PIN_SCL=8
	-D PIN_MT_DATA=37
	-D PIN_MT_CSN=14
	-D TFT_RST=6
	-D STRAIN_DO=38
	-D STRAIN_SCK=2

    -D DO_AUTOMATIC_MOTOR_CALIBRATION=0