Skip to content

Latest commit

 

History

History
 
 

ST_NUCLEO144_F746ZG

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
common
common
 
 
managed_helpers
managed_helpers
 
 
nanoBooter
nanoBooter
 
 
nanoCLR
nanoCLR
 
 
CMakeLists.txt
CMakeLists.txt
 
 
README.md
README.md
 
 
board.c
board.c
 
 
board.h
board.h
 
 
lwipopts.h
lwipopts.h
 
 
mbedtls_config.h
mbedtls_config.h
 
 
target_common.c
target_common.c
 
 
target_common.h.in
target_common.h.in
 
 
target_lwip_sntp_opts.h
target_lwip_sntp_opts.h
 
 
target_windows_devices_adc_config.cpp
target_windows_devices_adc_config.cpp
 
 
target_windows_devices_i2c_config.cpp
target_windows_devices_i2c_config.cpp
 
 
target_windows_devices_serialcommunication_config.cpp
target_windows_devices_serialcommunication_config.cpp
 
 
target_windows_devices_spi_config.cpp
target_windows_devices_spi_config.cpp
 
 

README.md

For a successful build the following changes are required:

In halconf.g (in both nanoBooter and nanoCLR folders), when compared with a default file:

  • HAL_USE_SERIAL to TRUE
  • HAL_USE_SERIAL_USB to TRUE
  • HAL_USE_USB to TRUE
  • SERIAL_DEFAULT_BITRATE to 115200

In mcuconf.h (in both nanoBooter and nanoCLR folders), when compared with a default file:

  • STM32_SERIAL_USE_USART2 to TRUE
  • STM32_USB_USE_OTG1 to TRUE

In chconf.h (only for nanoCLR folder), when compared with a default file:

  • set the CORTEX_VTOR_INIT with the appropriate address of the vector table for nanoCLR

NOTE: this configuration was successfully tested in an ST_NUCLEO144_F746ZG board using the Serial over USB connection on USB port 1 that creates a virtual COM port.

Floating point

The current build is set to add support for single-precision floating point. Meaning that System.Math API supports only the float overloads. The double ones will throw a NotImplementedException.