Xiaomi MIoT configs #406
Replies: 8 comments 23 replies
-
Dreame D9 (
|
Beta Was this translation helpful? Give feedback.
-
|
@PhPersson open card editor, select a room you want to clean and click "Copy service call". You will get a filled-in service call. |
Beta Was this translation helpful? Give feedback.
-
|
@MaggiMaikel You have to put it in card's config. Open yaml editor when editing the card |
Beta Was this translation helpful? Give feedback.
-
|
Wow! |
Beta Was this translation helpful? Give feedback.
-
|
Hey @PiotrMachowski, |
Beta Was this translation helpful? Give feedback.
-
|
Hi @PiotrMachowski , |
Beta Was this translation helpful? Give feedback.
-
Xiaomi Mi Mop/Xiaomi Mijia 1C (
|
Beta Was this translation helpful? Give feedback.
-
Vaccum room tested, it's works in my Mija 1Cthx for @benchristian88 - template: vacuum_clean_segment
max_selections: 1
repeats_type: EXTERNAL
max_repeats: 3
service_call_schema:
service: xiaomi_miot.call_action
service_data:
entity_id: '[[entity_id]]'
siid: 18
aiid: 1
params:
- piid: 1
value: 18
- piid: 21
value: '{"selects":[[[[selection_unwrapped]],[[repeats]],3,3,1]]}'
force_params: true
predefined_selections:
... |
Beta Was this translation helpful? Give feedback.
-
|
Aren't more than 1 selections possible? |
Beta Was this translation helpful? Give feedback.
-
|
Another working configuration for rooms cleaning. map_modes:
- name: Rooms
icon: mdi:door-sliding-open
template: vacuum_clean_segment
run_immediately: false
coordinates_rounding: true
coordinates_to_meters_divider: 1000
selection_type: ROOM
max_selections: 72
repeats_type: EXTERNAL
max_repeats: 5
service_call_schema:
service: xiaomi_miot.call_action
service_data:
entity_id: '[[entity_id]]'
siid: 18
aiid: 1
params:
- piid: 1
value: 18
- piid: 21
value: >
{% set selected = '[[selection_unwrapped]]'.split(',') %}
{"selects":
[
{% for item in selected %}
[{{item}},[[repeats]],[[fan_speed]],3,1]
{% if not loop.last %}
,
{% endif %}
{% endfor %}
]}
force_params: true
evaluate_data_as_template: true
predefined_selections:
#your Rooms go here... |
Beta Was this translation helpful? Give feedback.
-
|
Add predefined_selections: <...>
variables:
fan_speed: "{{states('sensor.vacuum_fan_speed')}}"With {% set speed = state_attr('vacuum.<YOUR_ENTITY_ID>', 'fan_speed') %}
{% if speed == '标准' %}
1
{% elif speed == '中档' %}
2
{% elif speed == '强力' %}
3
{% else %}
0
{% endif %} |
Beta Was this translation helpful? Give feedback.
-
Dreame L10 Pro (
|
Beta Was this translation helpful? Give feedback.
-
Mi Robot Vacuum-Mop (
|
Beta Was this translation helpful? Give feedback.
-
Xiaomi Mijia 2C (
|
Beta Was this translation helpful? Give feedback.
-
Viomi V3 Max (viomi.vacuum.v23)
I didn't mess with repeats, but I don't think it will fit neatly into a single service call like other vacuums. - template: vacuum_clean_segment
service_call_schema:
service: xiaomi_miot.call_action
max_selections: 7
service_data:
entity_id: '[[entity_id]]'
siid: 4
aiid: 13
params:
- piid: 36
value: 0
- piid: 37
value: 1
- piid: 38
value: '[[selection_unwrapped]]'
force_params: true
Requires 2 service calls - the first to set the zone properties, then a second to start zone cleaning, which does not work in the # In map card:
- template: vacuum_clean_zone_predefined
name: Zones
service_call_schema:
service: input_number.set_value
service_data:
value: '[[zone_id]]'
entity_id: input_number.vacuum_zone_id
predefined_selections:
- zones: # Since these are not used in the actual automation, I've opted to display just an icon without zone outlines
- - 0
- 0
- 0
- 0
icon:
name: mdi:rug
x: -2475
'y': -1025
variables:
zone_id: 1
# Automation:
alias: "Vacuum: Trigger zone"
trigger:
- platform: numeric_state
entity_id: input_number.vacuum_zone_id
above: 0
condition: []
action:
- service: script.vacuum_clean_zone
data: {}
mode: single
# Script:
alias: "Vacuum: Clean Zone"
sequence:
- choose:
- conditions:
- condition: template
value_template: "{{ states('input_number.vacuum_zone_id') | float == 1 }}"
sequence:
- service: xiaomi_miot.set_miot_property
data:
entity_id: vacuum.dusty
siid: 6
piid: 2
value: "-3.4635,-0.3383,-3.4635,-2.5510,-0.1483,-2.5510,-0.1483,-0.3383"
- service: input_number.set_value # Reset to 0 so that selecting the next zone clean-up triggers automation.
data:
value: 0
target:
entity_id: input_number.vacuum_zone_id
- service: xiaomi_miot.call_action
data:
siid: 6
aiid: 5
entity_id: vacuum.dusty
mode: single
- service: xiaomi_miot.set_miot_property
data:
entity_id: vacuum.dusty
siid: 6
piid: 1
value: "-3.4635,-0.3383"
- service: xiaomi_miot.call_action
data:
siid: 6
aiid: 1
entity_id: vacuum.dusty |
Beta Was this translation helpful? Give feedback.
-
|
Hi, This is my card config: This is my automation.yaml This is my script.yaml And when i press in edit mode on copy service call while having the zone selected it shows this |
Beta Was this translation helpful? Give feedback.
-
|
This setup should be more universal: Card config: type: custom:xiaomi-vacuum-map-card
map_source:
camera: camera.xiaomi_cloud_map_extractor
entity: vacuum.viomi_v23_bdea_robot_cleaner
vacuum_platform: al-one/hass-xiaomi-miot
map_modes:
- template: vacuum_clean_segment
max_selections: 7
service_call_schema:
service: xiaomi_miot.call_action
service_data:
entity_id: '[[entity_id]]'
siid: 4
aiid: 13
params:
- piid: 36
value: 0
- piid: 37
value: 1
- piid: 38
value: '[[selection_unwrapped]]'
force_params: true
- template: vacuum_clean_segment
max_selections: 1
service_call_schema:
evaluate_data_as_template: true
service: xiaomi_miot.call_action
service_data:
entity_id: '[[entity_id]]'
siid: 6
piid: 2
value: "{% set s=[[[selection_unwrapped]]] %}{{s[0]}},{{s[1]}}],[{{s[2]}},{{s[1]}}],[{{s[2]}},{{s[3]}}],[{{s[0]}},{{s[3]}}"
calibration_source:
camera: true
two_finger_pan: falseAutomation: description: "Start zone cleaning"
mode: single
trigger:
- platform: event
event_type: call_service
event_data:
domain: xiaomi_miot
service: call_action
service_data:
entity_id: vacuum.viomi_v23_bdea_robot_cleaner
siid: 6
piid: 2
action:
- service: xiaomi_miot.call_action
data:
siid: 6
aiid: 5
entity_id: vacuum.viomi_v23_bdea_robot_cleaner |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, this worked for me! Had to add the predefined selections (didn't know about that) first to make it work. Just saying this here in case anyone else is trying to figure it out aswell. The second template vacuum_clean_segment didn't work. But the first one did. |
Beta Was this translation helpful? Give feedback.
-
|
Anyone have i tried that from L10 Pro, it says "Success" but doesnt starting Getting that result: |
Beta Was this translation helpful? Give feedback.
-
Like that? |
Beta Was this translation helpful? Give feedback.
-
|
Also tried that now, but also "success" but doesnt starting |
Beta Was this translation helpful? Give feedback.
-
|
Also, the zone Cleaning with that code works: |
Beta Was this translation helpful? Give feedback.
-
|
So i think value 18 wrong? But when i click Work-Mode on the page, it has error and not a list of all work modes or something :/ |
Beta Was this translation helpful? Give feedback.
-
|
Found the bug... force_params was not on the same space... my fault! thats working |
Beta Was this translation helpful? Give feedback.
-
Xiaomi Mop 2 Pro+ (dreame.vacuum.p2041o)
script: WARNING: multi zone is working for Rooms |
Beta Was this translation helpful? Give feedback.
-
Here you can share service call schemas for Xiaomi MIoT integration.
Do not post other problems/questions in this thread as they will be removed
Beta Was this translation helpful? Give feedback.
All reactions