macros.cfg

[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
variable_park_x2: 150 # try half your bed size.
variable_park_y2: 300
variable_z_lift2: 10
variable_velocity2: 60
variable_retract2: 0.5
gcode:
    TURN_OFF_HEATERS
# safe park coords
    {% set th = printer.toolhead %}
    {% set park_x2 = [params.X|default(park_x2)|int, th.axis_maximum.x-2]|min %}
    {% set park_y2 = [params.Y|default(park_y2)|int, th.axis_maximum.y-10]|min %}
    {% set park_z2 = [th.position.z + params.Z_LIFT|default(z_lift2)|int, th.axis_maximum.z]|min %}
    {% set park_feedrate2 = params.VELOCITY|default(velocity2)|int * 60 %}
       
    G91
    G1 E-{retract2} F3000
    
    # park toolhead
    G90
    G0 X{park_x2} Y{park_y2} Z{park_z2} F{park_feedrate2}
    CANCEL_PRINT_BASE


# End of gcode script

[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
# change this if you need more or less extrusion
variable_extrude: 1.0
gcode:
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    ##### set park positon for x and y #####
    # default is your max posion from your printer.cfg
    {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
    {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
    ##### calculate save lift position #####
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}
    {% if act_z < (max_z - 2.0) %}
        {% set z_safe = 2.0 %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
    ##### end of definitions #####
    PAUSE_BASE
    G91
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E-{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}
    {% if "xyz" in printer.toolhead.homed_axes %}
      G1 Z{z_safe} F900
      G90
      G1 X{x_park} Y{y_park} F6000
    {% else %}
      {action_respond_info("Printer not homed")}
    {% endif %} 
    
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
gcode:
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    #### get VELOCITY parameter if specified ####
    {% if 'VELOCITY' in params|upper %}
      {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
    {%else %}
      {% set get_params = "" %}
    {% endif %}
    ##### end of definitions #####
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G91
      G1 E{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}  
    RESUME_BASE {get_params}

[gcode_macro BED_PID_60]
gcode:
    PID_CALIBRATE HEATER=heater_bed TARGET=60

[gcode_macro EXTRUDER_PID_200]
gcode:
    M106 S179
    PID_CALIBRATE HEATER=extruder TARGET=200