CHANGELOG.md

Changelog

Version 4.64

• Fix: ESP32 pin mapping D16 incorrect
• Fix: ESP32 used_pin array at position D16 incorrect
• Fix: ESP32 second sensor PT100x exception fixed (mapping GPIO D16)
• Fix: Replaced deprecated ArduinoJSON function containskey
• Fix: DS18B20 sensor timeout when high resolution enabled
• changed: migrate web if ajax post methods to JSON format
• changed: Dallas DS18B20 temperature request async mode
• changed: logging output sensors, actors and induction
• New: web if client side validation
• New: InnuLog lib debug output on serial monitor
• New: InnuNextion Display lib (platformIO ready)
• Update: ArduinoJSON 7.2.0
• Update: ESPTool 4.8.1

Version 4.63

• Fix: missing LF (\n) in SSE broadcasts
• Changed: Avoid Strings in SSE and html response
• Update: Arduino CLI 1.0.4
• Update: InnuTicker 0.0.4

Version 4.62

• Update: Lib ArduinoJSON 7.1.0
• Update: VSCode 1.90
• Changed: Actors,IDS2 update intervall 1000ms

Version 4.61a

• Optimize: Load WebIf ESP32
• Update: ESPtool 4.7.0
• Update: VSCode 1.88

Version 4.60

• Optimize: Load WebIf ESP32
• Changed: WebIf set modal windows centered and scrollable
• New: Parameter senCycle for CBPi4 fermenter mode (leave default 1 second)
• Changed: Fermenter topics. CraftBeerPi 4.3.2 or newer required
• Update: Lib ArduinoJSON 7.0.4

Version 4.59

• Update: ArduinoJSON API 7
• Reworked: JSON handling: removed all nested objects and arrays (API 7)
• New: Parameter Display CBPi4 Fermenter
• Changed: MQTT Callback
• Changed: subscribe to fermenter topics if enabled
• New: Parameter dutycycle
• Fix: Free memory for _currentArgs after request has been handled in WebServer. (#9077)
• Fix: ESP8266WebServer - fix possible memory leak in request argument handling (#9076)

Version 4.58b

• Changed: Default WLAN name in AP Mode changed to MQTTDevice
• Changed: Reset to factory default (clear config and WLAN settings enabled)
• Fix: max number of sensors allowed
• Fix: dyn. increase sensor update intervall fitting number of configured sensors
• Fix: Reload WebIf after reboot failed
• Fix: ESP32 mDNS webservice
• Fix: close modal windows after config restore and reboot
• Changed: reboot function
• Changed: Merged source ESP8266 in ESP32 using compiler directives
• Changed: Rebuild WebIf
• Changed: Restore config file
• Optimzed: reduce amount of data transfered to connected clients
• New: language switch (en, de)
• New: Mouseover tooltips
• Changed: select handle sensor type and sensor pins
• Changed: IDS Pin Interrupt
• Fix: long sensor/actor names
• Fix: long mqtt topics
• Fix: HMI display mDNS name
• Changed: Added ".local" to mDNS hints, views and docs
• New: Added Max31865 Amplififer SPI support (PT100/PT1000 support) MOSI: D0 MISO: D1 SCLK: D2 CS: D4/D5/D6
• New: Added PT100/1000 sensor support
• Changed: max number of sensors 3
• Fix: Remove last sensor/actor did not refresh WebIf table

Version 4.56

• Changed: request sensor intervall (1000ms)
• Fix: Boot order driver Display
• Fix: Boot order driver DS18B20
• Fix: Event on MQTT error
• Fix: remove debug output
• Fix: Display flicker BrewPage actual temperature when CBPi4 ID not set
• Fix: Refactor Web Server parsing-impl.h #9005
• added: WiFi core events
• Changed: WebUpdate
• Fix: File explorer
• Removed: PCF8574 support (I2C)
• Removed: TickerNTP (save mem)
• Removed: TickerWLAN (save mem)
• Changed: sensor class (getter/setter)
• Changed: actor class (getter/setter)
• Changed: induction class (getter/setter)

Version 4.55a

• Changed: WebUpdate default SSL
• Changed: WebUpdate Log file (webUpdateLog.txt)
• Changed: WebUpdate check received file size before overwriting files in flash
• Fix: github changed MFLN - WebUpdate received 0 byte data
• Fix: WebUpdate
• renew: certificates SSL

Version 4.54

• Added: SSE auto reconnect
• Added: SSE checkAlive mobiles (tested on iOS only)
• Fix: Status icon SSE change background color red/green on disconnect/reconnect
• Change: InnuFramework
• Fix: Arduino ESP8266 core: No poison after block with current git version (Issue #8952)

Version 4.53 Release

• Changed: InnuFramework
• Fix: Reboot reload Webif
• Merge: dev to main

Version 4.52

• Fixed: Arduino ESP8266 core: Fix for occasional timeout issues #8944 (net error timeout - WebIf Fehler)
• Fixed: Arduino ESP8266 core: Fix for dangerous relocation: j: cannot encode #8925
• Changed: Arduino ESP8266 core: Add support WiFiClientSecure TCP KeepAlive #8940
• Added: SSE keepalive
• Changed: Cache control WebIf

Version 4.51

• Fix: Arduino ESP8266 Fix for occasional timeout issues #8944 (net error timeout - WebIf)
• Changed: InnuFramework mimeTypes und mimeTables

Version 4.50 SSE

• New: Server Sent Events SSE
• Added: SSE sensors, actors, IDS and misc
• Optimize: JS http polling (SSE)
• Added: Column SSE badge
• Changed: PCF display mDNS badges in disabled state
• Update: JQuery 3.7.0

Version 4.49 - dev & test version
Version 4.48 - development version

Version 4.47

• Optimize: CSS/JS load, WebIf performance
• Fixed: cores ESP8266WebServer
• Fixed: cores ESPSoftserial
• Changed: refresh time WebIf

Version 4.46

• Changed: faster Nextion display

Version 4.45

• Changed: Sensor handling (isConnected)
• Update: SoftSerial 8.0.2 (Nextion)

Version 4.44 maintenance update

• Update: ESP8266 Arduino 3.1.2
• Update: VSCode 1.76 Arduino 0.6
• Update: ArduinoJSON 6.21
• Update: SoftwareSerial 8.0.1
• Optimize: Framework

Version 4.41

• Update: Prepare for new release 4.41
• Changed: File handling (removed filenames)
• Removed: Debug code
• Update: Arduino for VSCode 0.5
• Optimize: Bootstrap CSS

Version 4.40e

• Update: ArduinoJSON lib 6.20.1
• Remove: debug code
• Fixed: JSON response misc

Version 4.40d

• Fixed: temperature digits in CBPi4
• Fixed: Typo save config IDS2

Version 4.40c

• Update: ESP8266 cores

• Update: Arduino for Visual Code 0.4.13

• Fixed: Ticker lib

• Update: ESP8266 Arduino 3.1.1

• Changed: Check value range

• Changed: Ticker sensors, actors and induction changed from 2500ms to 2000ms

Version 4.40a

• Fixed: hex sensor address (set resolution)
• Fixed: MQTT reconnect
• Fixed: MQTT connection state
• Fixed: IP address length
• Removed: mode brew without CBPi (mqttoff)
• Update: ESP8266 Arduino 3.1.0
• Optimzed: WebIf for Mobiles
• Added: Toast messages
• Fixed: AutoTune restart reset values
• Changed: Auto start WebUpdate tools after WebUpdate firmware
• Added: Backup and restore configuration
• Changed: Recipe import css style
• Fixed: Update buttons
• Resize: Chart
• Changed: PCF 0.3.7
• Fixed: WebUpdate exception OOM
• Added: Treshold and new power out (IDS2)
• Changed: Bootstrap 4.6.2
• Changed: VSCode 1.73.1
• Rebuild: new lib InnuAPID PID controller
• Rebuild: new lib InnuAPID AutoTune
• Removed: QuickPID and sTune
• Changed: VSCode 1.73
• Optimze: Performance mash webpage
• Optimze: Performance index webpage
• Changed: AutoTune lib calc Ku and Pu only
• Optimze: Performance PID calcs
• Changed: Resolution DS18B20 11bit (0.125°C steps)
• Added: PCF reset at startup
• Fixed: PCF8574 init
• Fixed: AutoTune CPU load
• Reworked: PID AutoTune
• Changed: PID lib to QuickPID
• Reworked: PID calc
• Fixed: change page event display not working correctly
• Fixed: Kettlepage no output
• Changed: max number of sensors 4
• Reworked: Timer mgmt
• Reworked: Ticker mgmt
• Removed: Eventmanager
• Reworked: WebIf index - Induction - PID
• Reworked: WebIf index - Sparge water - PID
• Reworked: WebIf mash - button size
• Reworked: WebIf async transfer
• Update: PCF8574 lib
• Changed: PWN actors
• Changed: Ticker handling
• Update: WifiManager lib
• Added: PWM input in actors table (0..100%)
• Added: actors PWM
• Fixed: typo IDS2 setpoint autotune
• Fixed: free mem below 20k
• Changed: VSCode 1.72.2
• Fixed: Order and power button ID actors on mash page
• Reworked: I2C lib - GPIO
• Added: PCF8574 to index.html
• Reworked: Ticker actors
• Renamed: PCF pins to P0 - P7 (D9-D16)
• Fixed: Display startPage
• Fixed: Bug in NextionX2 lib
• Fixed: trap causing unexpected restart (exception 28)
• Fixed: Display switch pages
• Added: currentPageID to NextionX2 lib
• Added: lastPageID to NextionX2 lib
• Fixed: Init progress bar init (Display)
• Reworked: Page up/down (display) until currentPageID availible from lib there is no reliable method switching pages
• Added: HLT sparge object
• Added: PCF8574 support (I2C)
• Changed: VSCode 1.71.1
• Fixed: Bug WebUpdate: unmount FS before restart
• Added: Import MQTTDevice mashplan format
• Added: Export mashplan to download file (json)
• Added: Reload button mashplan table
• Added: Mashplan table move row up/down
• Fixed: AutoTune starts only if IDS2 is enabled
• Added: Display output KettlePage while mqttoff is enabled
• Added: Display output BrewPage while mqttoff is enabled
• Changed: play button toggles to red, if waiting for autonext
• changed: play button start mash step regardless of target temp
• changed: play button no action if last mash step
• changed: play button no action if mash step active
• changed: play button no action if mash step paused
• Changed: moved manual autonext start from pause to play button
• Optimze: bootstrap.min.css pured
• Optimze: awefont pured to only in use glyphs
• Fixed: MMum import
• Changed: VSCode 1.71
• Added: Mash webpage (requires mqttoff)
• Added: mode mqttoff (mqtt communication disabled)
• Added: PID Controller GGM IDS2