Bosean FS-5000: Support request

[maxobe]

title

[Gissio]

Original message: BOSEAN FS5000 would be the absolute perfect hobbyst geiger counter with radpro

[Montecri]

Hi! Got one, but it came with the little tiny tube (very low sensitivity). Replaced it with a J321 and removed the solder jumper next to (-) terminal, which I believe is specific for the weaker tube since I saw pictures on the net with an M4011 and the jumper removed (please, correct me if I'm wrong).

Now, the next step is to get RadPro on it. What do I need to do?

Thank you for this great work! You're a doer, and not only a talker.

Regards,

• Cristiano

[Gissio]

This is what needs to be done:

• Somebody already downloaded the firmware from the device. So you would need to disassemble it, and see how the code accesses the MCU internal devices (input/output ports, timers, ADCs, etc).
• It would also be helpful to make a schematics of the FS-5000 circuitry, so you can understand what goes where. To do this, you would have to follow the traces from the microprocessor to the board's devices (keyboard, display, battery, etc) and see what port connects to what device. A multimeter might help.
• Then, follow the steps in https://github.com/Gissio/radpro/blob/main/docs/developers.md and customize the code for the FS-5000.

[maxobe]

Works great

[Gissio]

Did you win?

[maxobe]

Not yet