There are 2 alternatives to save the OpenPose output.
- The
write_jsonflag saves the people pose data using a custom JSON writer. Each JSON file has apeoplearray of objects, where each object has:- An array
pose_keypoints_2dcontaining the body part locations and detection confidence formatted asx1,y1,c1,x2,y2,c2,.... The coordinatesxandycan be normalized to the range [0,1], [-1,1], [0, source size], [0, output size], etc., depending on the flagkeypoint_scale(see flag for more information), whilecis the confidence score in the range [0,1]. - The arrays
face_keypoints_2d,hand_left_keypoints_2d, andhand_right_keypoints_2d, analogous topose_keypoints_2d. - The analogous 3-D arrays
body_keypoints_3d,face_keypoints_3d,hand_left_keypoints_2d, andhand_right_keypoints_2d(if--3dis enabled, otherwise they will be empty). Instead ofx1,y1,c1,x2,y2,c2,..., their format isx1,y1,z1,c1,x2,y2,z2,c2,..., wherecis simply 1 or 0 depending on whether the 3-D reconstruction was successful or not. - The body part candidates before being assembled into people (if
--part_candidatesis enabled).
- An array
{
"version":1.1,
"people":[
{
"pose_keypoints_2d":[582.349,507.866,0.845918,746.975,631.307,0.587007,...],
"face_keypoints_2d":[468.725,715.636,0.189116,554.963,652.863,0.665039,...],
"hand_left_keypoints_2d":[746.975,631.307,0.587007,615.659,617.567,0.377899,...],
"hand_right_keypoints_2d":[617.581,472.65,0.797508,0,0,0,723.431,462.783,0.88765,...]
"pose_keypoints_3d":[582.349,507.866,507.866,0.845918,507.866,746.975,631.307,0.587007,...],
"face_keypoints_3d":[468.725,715.636,715.636,0.189116,715.636,554.963,652.863,0.665039,...],
"hand_left_keypoints_3d":[746.975,631.307,631.307,0.587007,631.307,615.659,617.567,0.377899,...],
"hand_right_keypoints_3d":[617.581,472.65,472.65,0.797508,472.65,0,0,0,723.431,462.783,0.88765,...]
}
],
// If `--part_candidates` enabled
"part_candidates":[
{
"0":[296.994,258.976,0.845918,238.996,365.027,0.189116],
"1":[381.024,321.984,0.587007],
"2":[313.996,314.97,0.377899],
"3":[238.996,365.027,0.189116],
"4":[283.015,332.986,0.665039],
"5":[457.987,324.003,0.430488,283.015,332.986,0.665039],
"6":[],
"7":[],
"8":[],
"9":[],
"10":[],
"11":[],
"12":[],
"13":[],
"14":[293.001,242.991,0.674305],
"15":[314.978,241,0.797508],
"16":[],
"17":[369.007,235.964,0.88765]
}
]
}
- (Deprecated) The
write_keypointflag uses the OpenCV cv::FileStorage default formats, i.e. JSON (available after OpenCV 3.0), XML, and YML. Note that it does not include any other information othern than keypoints.
Both of them follow the keypoint ordering described in the Keypoint Ordering section.
The body part mapping order of any body model (e.g. COCO, MPI) can be extracted from the C++ API by using the getPoseBodyPartMapping(const PoseModel poseModel) function available in poseParameters.hpp:
// C++ API call
#include <openpose/pose/poseParameters.hpp>
const auto& poseBodyPartMappingBody25 = getPoseBodyPartMapping(PoseModel::BODY_25);
const auto& poseBodyPartMappingCoco = getPoseBodyPartMapping(PoseModel::COCO_18);
const auto& poseBodyPartMappingMpi = getPoseBodyPartMapping(PoseModel::MPI_15);
// Result for BODY_25 (25 body parts consisting of COCO + foot)
// const std::map<unsigned int, std::string> POSE_BODY_25_BODY_PARTS {
// {0, "Nose"},
// {1, "Neck"},
// {2, "RShoulder"},
// {3, "RElbow"},
// {4, "RWrist"},
// {5, "LShoulder"},
// {6, "LElbow"},
// {7, "LWrist"},
// {8, "MidHip"},
// {9, "RHip"},
// {10, "RKnee"},
// {11, "RAnkle"},
// {12, "LHip"},
// {13, "LKnee"},
// {14, "LAnkle"},
// {15, "REye"},
// {16, "LEye"},
// {17, "REar"},
// {18, "LEar"},
// {19, "LBigToe"},
// {20, "LSmallToe"},
// {21, "LHeel"},
// {22, "RBigToe"},
// {23, "RSmallToe"},
// {24, "RHeel"},
// {25, "Background"}
// };
For the heat maps storing format, instead of saving each of the 67 heatmaps (18 body parts + background + 2 x 19 PAFs) individually, the library concatenates them into a huge (width x #heat maps) x (height) matrix (i.e., concatenated by columns). E.g., columns [0, individual heat map width] contains the first heat map, columns [individual heat map width + 1, 2 * individual heat map width] contains the second heat map, etc. Note that some image viewers are not able to display the resulting images due to the size. However, Chrome and Firefox are able to properly open them.
The saving order is body parts + background + PAFs. Any of them can be disabled with program flags. If background is disabled, then the final image will be body parts + PAFs. The body parts and background follow the order of getPoseBodyPartMapping(const PoseModel poseModel).
The PAFs follow the order specified on getPosePartPairs(const PoseModel poseModel) together with getPoseMapIndex(const PoseModel poseModel). E.g., assuming COCO (see example code below), the PAF channels in COCO start in 19 (smallest number in getPoseMapIndex, equal to #body parts + 1), and end up in 56 (highest one). Then, we can match its value from getPosePartPairs. For instance, 19 (x-channel) and 20 (y-channel) in getPoseMapIndex correspond to PAF from body part 1 to 8; 21 and 22 correspond to x,y channels in the joint from body part 8 to 9, etc. Note that if the smallest channel is odd (19), then all the x-channels are odd, and all the y-channels even. If the smallest channel is even, then the opposite will happen.
// C++ API call
#include <openpose/pose/poseParameters.hpp>
const auto& posePartPairsBody25 = getPosePartPairs(PoseModel::BODY_25);
const auto& posePartPairsCoco = getPosePartPairs(PoseModel::COCO_18);
const auto& posePartPairsMpi = getPosePartPairs(PoseModel::MPI_15);
// getPosePartPairs(PoseModel::BODY_25) result
// Each index is the key value corresponding to each body part in `getPoseBodyPartMapping`. E.g., 1 for "Neck", 2 for "RShoulder", etc.
// 1,8, 1,2, 1,5, 2,3, 3,4, 5,6, 6,7, 8,9, 9,10, 10,11, 8,12, 12,13, 13,14, 1,0, 0,15, 15,17, 0,16, 16,18, 2,17, 5,18, 14,19,19,20,14,21, 11,22,22,23,11,24
// getPoseMapIndex(PoseModel::BODY_25) result
// 0,1, 14,15, 22,23, 16,17, 18,19, 24,25, 26,27, 6,7, 2,3, 4,5, 8,9, 10,11, 12,13, 30,31, 32,33, 36,37, 34,35, 38,39, 20,21, 28,29, 40,41,42,43,44,45, 46,47,48,49,50,51
The output format is analogous for hand (hand_left_keypoints, hand_right_keypoints) and face (face_keypoints) JSON files.
We use standard formats (JSON, XML, PNG, JPG, ...) to save our results, so there are many open-source libraries to read them in most programming languages. From C++, but you might the functions in include/openpose/filestream/fileStream.hpp. In particular, loadData (for JSON, XML and YML files) and loadImage (for image formats such as PNG or JPG) to load the data into cv::Mat format.
There are 3 different keypoint Array<float> elements in the Datum class:
- Array poseKeypoints: In order to access person
personand body partpart(where the index matchesPOSE_COCO_BODY_PARTSorPOSE_MPI_BODY_PARTS), you can simply output:
// Common parameters needed
const auto numberPeopleDetected = poseKeypoints.getSize(0);
const auto numberBodyParts = poseKeypoints.getSize(1);
// Easy version
const auto x = poseKeypoints[{person, part, 0}];
const auto y = poseKeypoints[{person, part, 1}];
const auto score = poseKeypoints[{person, part, 2}];
// Slightly more efficient version
// If you want to access these elements on a huge loop, you can get the index
// by your own, but it is usually not faster enough to be worthy
const auto baseIndex = poseKeypoints.getSize(2)*(person*numberBodyParts + part);
const auto x = poseKeypoints[baseIndex];
const auto y = poseKeypoints[baseIndex + 1];
const auto score = poseKeypoints[baseIndex + 2];
- Array faceKeypoints: It is completely analogous to poseKeypoints.
// Common parameters needed
const auto numberPeopleDetected = faceKeypoints.getSize(0);
const auto numberFaceParts = faceKeypoints.getSize(1);
// Easy version
const auto x = faceKeypoints[{person, part, 0}];
const auto y = faceKeypoints[{person, part, 1}];
const auto score = faceKeypoints[{person, part, 2}];
// Slightly more efficient version
const auto baseIndex = faceKeypoints.getSize(2)*(person*numberFaceParts + part);
const auto x = faceKeypoints[baseIndex];
const auto y = faceKeypoints[baseIndex + 1];
const auto score = faceKeypoints[baseIndex + 2];
- std::array<Array, 2> handKeypoints, where handKeypoints[0] corresponds to the left hand and handKeypoints[1] to the right one. Each handKeypoints[i] is analogous to poseKeypoints and faceKeypoints:
// Common parameters needed
const auto numberPeopleDetected = handKeypoints[0].getSize(0); // = handKeypoints[1].getSize(0)
const auto numberHandParts = handKeypoints[0].getSize(1); // = handKeypoints[1].getSize(1)
// Easy version
// Left Hand
const auto xL = handKeypoints[0][{person, part, 0}];
const auto yL = handKeypoints[0][{person, part, 1}];
const auto scoreL = handKeypoints[0][{person, part, 2}];
// Right Hand
const auto xR = handKeypoints[1][{person, part, 0}];
const auto yR = handKeypoints[1][{person, part, 1}];
const auto scoreR = handKeypoints[1][{person, part, 2}];
// Slightly more efficient version
const auto baseIndex = handKeypoints[0].getSize(2)*(person*numberHandParts + part);
// Left Hand
const auto xL = handKeypoints[0][baseIndex];
const auto yL = handKeypoints[0][baseIndex + 1];
const auto scoreL = handKeypoints[0][baseIndex + 2];
// Right Hand
const auto xR = handKeypoints[1][baseIndex];
const auto yR = handKeypoints[1][baseIndex + 1];
const auto scoreR = handKeypoints[1][baseIndex + 2];