-
|
Do I understand correctly that tun mode in v2rayN does not work correctly as in nekoray? If I turn on TUN mode and select blacklist mode in the settings and add up a rule with the process name and proxy route, then this setting will not work correctly. It is the setting with reference to the process name that is of interest. 
|
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 59 replies
-
|
Unfortunately, this software has the same problem as Proxifier. |
Beta Was this translation helpful? Give feedback.
-
|
Does a second connection appear on the network connection indicator near the clock when TUN mode is turned on? |
Beta Was this translation helpful? Give feedback.
-
|
I understand that the TUN mode creates a virtual adapter at the LAN level, so naturally it will be there (I have already deleted nekoray). And the very fact of displaying traffic over socks instead of http shows that I use TUN, not a system proxy. Therefore, to your specific question, I answer positively without the need for verification. |
Beta Was this translation helpful? Give feedback.
-
|
The problem is not that TUN does not work, but that Nekoray in my example, as you probably already understood, does not capture a specific process such as Discord, although I use a whitelist. It just proxies all my traffic to TUN. |
Beta Was this translation helpful? Give feedback.
-
|
Perhaps the fact is that the prerelease is raw, as you can see, I use version 4+, not stable 3+. |
Beta Was this translation helpful? Give feedback.
-
LOL)) i have same problem with v2ray. And that's exactly my question about, why doesn't v2ray capture the process. But in my case, everything works with Nekoray lol. But in your case all But in your case, everything the other way around. |
Beta Was this translation helpful? Give feedback.
-
|
Just a question in the work of routing rules by WhiteList in TUN mode and filter by process ID. If you turn on TUN mode in General mode, everything works fine. If you enable TUN mode with WhiteList with domain and IP rules, everything works fine, including voice channels. But if you enable WhiteList and enable the rule by process ID, then routing does not work and the connection is not established. At the same time, if you use Nekoray (not advertising) with the sing-box core, then such rules work properly there, but I like v2rayN more, but unfortunately v2rayN does not work properly with the rules for the process id |
Beta Was this translation helpful? Give feedback.
-
|
My question probably relates more to developers. Maybe I threw it into the wrong channel? |
Beta Was this translation helpful? Give feedback.
-
|
Nikoray in the latest version uses Xray and sign-box, but if you use the default settings, when you have a sign-box. While v2RayN uses Xray by default, maybe that's the problem? The prerelease version Nekoray (prerelease uses only sign-box) and as you may have already understood, it does not work for me, as it does for you. |
Beta Was this translation helpful? Give feedback.
-
I think you can create an issue about this, because process mode doesn't really work here. |
Beta Was this translation helpful? Give feedback.
-
|
"В споре рождается истина!" спасибо дружище действительно переключил для своего протокола режим ядра на sign-box и всё взлетело, маршрутизация по processId теперь отрабатывает корректно. Это то что мне и нужно было. Кстати я до этого пытался менять ядро, но я не досмотрел и сменил не для VLESS, а для VMess по этому и не работало до этого (а я домал странно ядро же тоже, оказалось нужно быть внимательнее). |
Beta Was this translation helpful? Give feedback.
-
So: Maybe I should change Nekoray settings to Xray to make Discord work? @XaTTa6-25 What Nekoray settings do you have there, could you send the screenshots of all your settings since it seems you are the only one who made it work? By the way, today I l've checked how Steam and CS2 multiplayer game works there within v2RayN - CS2 was tunnelled through v2RayN so my ping was like 2-3 times bigger. |
Beta Was this translation helpful? Give feedback.
-
|
"The truth is born in a dispute!" thanks, my friend, I really switched the kernel mode to sign-box for my protocol and everything work now, routing by ProcessID is now working correctly. That's what I needed. By the way, I tried to change the kernel before, but I didn't look at it and changed it not for VLESS, but for VMess, and it didn't work before that (and I don't understand why it not working whith same kernel, i need to be more careful). |
Beta Was this translation helpful? Give feedback.
-
|
Добавляешь в стандартный список Blacklist новую запись с настройками Proxy и указываешь имя процесса который нужно пускать через тунель. Правило поднимаешь выше последнего. Включаешь режим VPN и выбираешь Blacklist. Смотришь у часов что поднялся интерфейс иногда не поднимается (ребутни комп всегда помогает) |
Beta Was this translation helpful? Give feedback.
-
|
Спасибо, попробую |
Beta Was this translation helpful? Give feedback.
-
Try to turn off DNS via proxy, I think it will help. If you specify Update.exe I think that will be enough. I do not know about the full address, you need to look at the documentation. |
Beta Was this translation helpful? Give feedback.
-
|
Hi. Can you please advise me, I set up everything as mentioned in your guide and at first everything worked. But after some time RTC connections in Discord stopped working. The log shows that HTTP requests are processed through |
Beta Was this translation helpful? Give feedback.
-
First of all, check that your connection protocol uses sing-box. Because the routing rules for applications only work with sing-box. Then make sure that the tunnel mode is enabled. And finally, check that the tunnel connection is definitely established. Otherwise, download v2ray from nova and configure it from scratch
|
Beta Was this translation helpful? Give feedback.
"The truth is born in a dispute!" thanks, my friend, I really switched the kernel mode to sign-box for my protocol and everything work now, routing by ProcessID is now working correctly. That's what I needed. By the way, I tried to change the kernel before, but I didn't look at it and changed it not for VLESS, but for VMess, and it didn't work before that (and I don't understand why it not working whith same kernel, i need to be more careful).