v3.2.68

• Updated so E10M20-T1, M2D20, M2D18 and M2D17 now work in models that use device tree and are using:
  • DSM 7.2 Update 2 and 3, 7.2.1, 7.2.1 Update 1, 2 and 3.
  • Fix Issue #132
  • Fix Issue #148
• Now edits model.dtb instead of downloading a pre-edited version.
• Improvements to --restore option.
• Fix for Unknown vendor causing "Unsupported firmware version" warning.
  • Fix Issue #161
• Now supports NVMe drives that show as Unknown brand in storage manager:
  • ADATA, Corsair, Gigabyte, HS/MAXIO, MSI, Netac, Phison, PNY
  • SK Hynix, Solidigm, SPCC/Lexar, TEAMGROUP, UMIS, ZHITAI
  • Fix Issue #161
• Fixed bug where memory was shown in MB but with GB unit.
• Removed -i, --immutable option.
• Minor bug fixes.

v3.2.67-RC

• Updated so E10M20-T1, M2D20 and M2D18 now work in models that use device tree and are using:
  • DSM 7.2 Update 2 and 3, 7.2.1, 7.2.1 Update 1, 2 and 3.
• Now edits model.dtb instead of downloading a pre-edited version.
• Fix for Unknown vendor causing "Unsupported firmware version" warning. Issue #161
• Now supports NVMe drives that show as Unknown brand in storage manager: Issue #161
  • ADATA, Corsair, Gigabyte, HS/MAXIO, MSI, Netac, Phison, PNY
  • SK Hynix, Solidigm, SPCC/Lexar, TEAMGROUP, UMIS, ZHITAI
• Fixed bug where memory was shown in MB but with GB unit.
• Removed -i, --immutable option.
• Minor bug fixes.

v3.2.66-RC

• Updated so E10M20-T1, M2D20 and M2D18 now work in models that use device tree and are using DSM 7.2 Update 2 and Update 3.
• Fixed bug where memory was shown in MB but with GB unit.
• Removed -i, --immutable option.

v3.1.65

• Bug fix for NVMe drives with / in the model name for non-device tree Synology models. Issue #154

v3.1.64

• Added -e, --email option to disable coloured output to make task scheduler emails easier to read.
• Bug fix for script not updating itself if .sh file had been renamed.
• Bug fix for missing executable permissions if .sh file had been renamed.
• Bug fix to prevent update loop if script's .tar.gz file already exists in /tmp.
• Bug fix to prevent update failing if script's temp folder already exists in /tmp.
• Now only copies CHANGES.txt to script location if script is located on a volume,
  • to prevent putting CHANGES.txt on system partition (/usr/bin, /usr/sbin, /root etc.)

v3.1.63

• Added support to disable unsupported memory warnings on DVA models. Issue #136

v3.1.62

• Fixed bug where newly connected expansion units weren't found until up to 24 hours later. Issue #124

v3.1.61

• Added enabling E10M20-T1, M2D20 and M2D18 for DS1821+, DS1621+ and DS1520+.
• Added enabling M2D18 for RS822RP+, RS822+, RS1221RP+ and RS1221+ for older DSM versions.
• Fixed enabling E10M20-T1, M2D20 and M2D18 cards in models that don't officially support them.
• Fixed bugs where the calculated amount of installed memory could be incorrect:
  • If last memory socket was empty an invalid unit of bytes could be used. Issue #106
  • When dmidecode returned MB for one ram module and GB for another ram module. Issue #107
• Fixed bug displaying the max memory setting if total installed memory was less than the max memory. Issue #107
• Fixed bug where sata1 drive firmware version was wrong if there was a sata10 drive.

v3.1.60-RC

v3.1.60

• Added enabling E10M20-T1, M2D20 and M2D18 for DS1821+, DS1621+ and DS1520+.
• Added enabling M2D18 for RS822RP+, RS822+, RS1221RP+ and RS1221+ for older DSM versions.
• Fixed enabling E10M20-T1, M2D20 and M2D18 cards in models that don't officially support them.
• Fixed bugs where the calculated amount of installed memory could be incorrect:
  • If last memory socket was empty an invalid unit of bytes could be used. Issue #106
  • When dmidecode returned MB for one ram module and GB for another ram module. Issue #107
• Fixed bug displaying the max memory setting if total installed memory was less than the max memory. Issue #107
• Fixed bug where sata1 drive firmware version was wrong if there was a sata10 drive.

v3.1.59-RC

v3.1.59

• Added enabling E10M20-T1, M2D20 and M2D18 for DS1821+, DS1621+ and DS1520+.
• Added enabling M2D18 for RS822RP+, RS822+, RS1221RP+ and RS1221+ for older DSM versions.
• Fixed enabling E10M20-T1, M2D20 and M2D18 cards in models that don't officially support them.
• Fixed bugs where the calculated amount of installed memory could be incorrect:
  • If last memory socket was empty an invalid unit of bytes could be used. Issue #106
  • When dmidecode returned MB for one ram module and GB for another ram module. Issue #107
• Fixed bug displaying the max memory setting if total installed memory was less than the max memory. Issue #107