HP NVME SSD Tip: Unable to recognize firmware version

[Mrch08]

hi 007revad. I'm not sure why I added the supplier ID in syno_hdd_vendor_ids as per the prompt. The "Unknown" now shows normal "HP", but the firmware version still indicates it cannot be recognized!
The original 920+system was migrated to SA6400, with system version DSM7.2.1。

[noobs69]

hi 007revad , please add support to my drive too thanks you

[007revad]

@Mrch08 @noobs69

Are they a real Synology SA6400 or XPE?

[noobs69]

@007revad XPE sir

[Mrch08]

@007revad sir Not the real Synology SA6400, it's XPE.

[Neobond]

I have the same thing. I did not run the script yet and I have Synology SA6400 (it's XPE)

Mine are TEAMGROUP MP44Q 4TB SSDs.

When I ran the script the first time (ensuring it was on Volume 2 HDDs) DSM would no longer boot, indicating that the volume was removed. I had it setup as a boot task with

volume2/scripts/syno_hdd_db.sh --autoupdate=7 trigger

[007revad]

Can you try the following:

1. Run syno_hdd_db with the --restore option.
2. Update to https://github.com/007revad/Synology_HDD_db/releases/tag/v3.5.103 and run it.

[Mrch08]

sir，I followed the instructions and the problem still persists.

[noobs69]

restored and updated script still same before.

[noobs69]

@Mrch08 @Neobond update to newest RR version. it's fixed guys . thanks you so much for your time Mr.Russell @007revad

[m0tt]

For me it's still not working. I run syno_hdd_db with --restore option and then syno_hdd_db but no success. V3.5.103. Any what elase may I try to fix it?